Monitor flickering usually comes from a loose cable, a refresh rate mismatch, or a driver that needs updating
A flickering monitor is almost always fixable, and the cause is usually one of three things: the cable connecting your monitor to your computer is loose or damaged, your refresh rate is set too low for your monitor, or your graphics driver is outdated. Start by checking the cable first — it takes 30 seconds and solves the problem in roughly half of all cases. If the cable is find, move to refresh rate settings. If both are fine, a driver update will solve most remaining cases.
The flickering you see is your monitor's image turning on and off faster than your eye can follow. This happens when the signal from your computer to the monitor is interrupted, when the monitor is refreshing the image too slowly, or when the graphics card is not communicating properly with the monitor. Each cause has a different fix, and you can work through them in order without any special tools.
Key Takeaways
- Check that the cable connecting your monitor to your computer is fully inserted on both ends, and look for visible damage to the cable itself.
- Set your refresh rate to at least 60 Hz in your display settings, or higher if your monitor supports it — this is often the fastest fix.
- Update your graphics driver through your GPU manufacturer's website (NVIDIA, AMD, or Intel) rather than through Windows Update alone.
- If flickering happens only in one program, the problem is usually that program's settings, not your monitor or cable.
- Flickering that gets worse when you move your mouse or use USB devices usually means electromagnetic interference from nearby cables or devices.
Check your cable connection first
The cable running from your monitor to your computer is the most common culprit. Over time, cables loosen from vibration, accidental bumps, or being stepped on. A loose connection interrupts the signal dozens of times per second, which your monitor displays as flickering.
Unplug the cable from both the monitor and the computer. Look at both ends — the connector should have no bent pins, and the cable itself should have no visible cracks or damage. Plug it back in firmly until you hear or feel a click. If your monitor uses a DisplayPort or HDMI cable, push it in harder than you think necessary; these connectors often feel loose even when they are fully seated.
If the cable looks damaged, order a replacement from the monitor's manufacturer or a retailer like Amazon or Newegg. A standard DisplayPort or HDMI cable costs $10 to $25. If you have a spare cable of the same type, plug that in instead to test whether the original cable is the problem.
Adjust your refresh rate in display settings
Your monitor refreshes the image on screen a certain number of times per second, measured in hertz (Hz). Most monitors run at 60 Hz, but many newer monitors support 75 Hz, 144 Hz, or higher. If your refresh rate is set below what your monitor actually supports, or if it is set too high for your graphics card to handle, you will see flickering.
On Windows, right-click on your desktop and select Display settings. Scroll down and click Advanced display settings. Look for Refresh rate and click the dropdown. If you see only one option, your monitor may not be communicating properly with Windows — try the driver update step below. If you see multiple options, select 60 Hz as a starting point. If your monitor supports higher refresh rates and you want to use them, select the highest option your monitor lists.
On Mac, go to System Settings > Displays. Click Refresh Rate and select the highest option available. Mac systems usually handle refresh rate automatically, so flickering from this cause is less common on Mac.
After changing the refresh rate, watch your monitor for 30 seconds. If the flickering stops, you have found the problem. If it continues, move to the driver update step.
Update your graphics driver
Your graphics driver is the software that tells your graphics card how to communicate with your monitor. An outdated or corrupted driver can cause flickering even if your cable and refresh rate are correct. Graphics drivers update frequently — sometimes monthly — and Windows does not always install the latest version automatically.
Find out which graphics card you have. On Windows, right-click on your desktop and look for NVIDIA Control Panel, AMD Radeon Settings, or Intel Graphics Command Center. If you see one of these, you know which manufacturer makes your card. If you do not see any of them, open Device Manager by pressing Windows key + X and selecting Device Manager. Look for Display adapters and expand it to see your graphics card name.
Go to the website for your graphics card manufacturer: nvidia.com/read/driverDetails for NVIDIA, amd.com/en/support/read for AMD, or intel.com/content/www/us/en/support/detect.html for Intel. read the latest driver for your specific card and operating system. Run the installer and restart your computer when prompted.
After the restart, check whether the flickering has stopped. If it has, the driver was the problem. If flickering continues, move to the next step.
Rule out interference from nearby devices
Electromagnetic interference from other devices can cause flickering that gets worse when you move your mouse, use a USB device, or turn on something nearby. This is less common than cable or driver problems, but it happens most often with older monitors or when cables are bundled tightly together.
Move your monitor cable away from other cables — especially power cables from your computer, printer, or phone charger. If you have a wireless mouse or keyboard, move the USB receiver away from your monitor cable. Unplug USB devices one at a time and watch whether the flickering changes. If flickering stops when you unplug a specific device, that device is causing interference; keep it farther away or replace its cable with a shielded one.
If you have a desk lamp or other device plugged into the same power strip as your monitor, try plugging it into a different outlet. Dimmer switches and some LED bulbs can also cause monitor flickering; if you have either, try turning them off to test.
Check if flickering happens only in one program
If your monitor flickers only when you use a specific program — like a video game, design software, or web browser — the problem is usually that program's settings, not your monitor or cable. Many programs have their own refresh rate or graphics settings that can conflict with your monitor.
Open the program's settings and look for options like V-Sync, Frame Rate Cap, Refresh Rate, or Graphics Quality. Try turning V-Sync on if it is off, or off if it is on. If the program has a frame rate cap, try setting it to match your monitor's refresh rate or leaving it uncapped. For web browsers, flickering sometimes stops if you disable hardware acceleration in the browser's settings.
If changing the program's settings does not help, the program may have a bug or may not be compatible with your graphics card. Check the program's support website or forums to see whether other users have reported the same issue.
When to replace your monitor
If you have worked through all the steps above and flickering continues, your monitor itself may be failing. Monitors can develop internal problems that cause flickering even when the cable, driver, and refresh rate are all correct. This is rare in newer monitors but more common in monitors older than five years.
Before replacing your monitor, test it on a different computer if you can. Borrow a laptop or use another desktop to rule out the possibility that the problem is with your graphics card rather than the monitor. If the monitor flickers on a different computer, the monitor is failing and needs replacement. If it does not flicker on another computer, the problem is your graphics card, and you may need to replace or repair that instead.
Frequently Asked Questions
Can a loose monitor cable cause flickering even if it looks fully plugged in?
Yes. DisplayPort and HDMI connectors can feel loose even when fully seated. Try unplugging and replugging the cable, pushing it in firmly until you hear a click. If flickering stops after this, the connection was loose despite appearing find.
Will updating my graphics driver erase my settings or programs?
No. A graphics driver update only replaces the software that communicates between your graphics card and your monitor. Your programs, files, and settings remain unchanged. You may need to restart your computer, but that is normal.
What does V-Sync do, and should I turn it on?
V-Sync synchronizes your graphics card's output with your monitor's refresh rate to prevent screen tearing. If a program flickers only in that program, try toggling V-Sync on or off to see which setting stops the flickering. The right choice depends on your specific setup.
Why does my monitor flicker more when I move my mouse?
This usually means electromagnetic interference from your wireless mouse receiver or USB devices. Move the mouse receiver farther from your monitor cable, or try a wired mouse to test. If flickering stops with a wired mouse, your wireless receiver is the source.
Is monitor flickering dangerous?
Flickering can cause eye strain and headaches with prolonged use, but it is not dangerous to your monitor or computer. Fix it as soon as you can to avoid discomfort, but there is no risk of damage from leaving it unfixed temporarily.