What causes a monitor to go black
A black screen usually means one of three things: the monitor is not receiving a signal from your computer, the monitor is in sleep mode, or a cable has come loose. The good news is that most of these are quick fixes you can do yourself without opening anything up or calling for help.
The most common culprit is a loose cable — either the power cable that plugs into the wall, or the video cable that connects the monitor to your computer. The second most common is that your monitor has gone into sleep mode because nothing has moved the mouse or touched the keyboard for a while. The third is that your computer itself has gone to sleep, or the graphics card (the part that sends the picture to the monitor) has stopped working.
Key Takeaways
- Check the power cable first — make sure it is plugged firmly into both the monitor and the wall outlet, and that the outlet itself has power.
- Move your mouse or press a key to wake the monitor from sleep mode, which is often the fastest fix.
- Inspect the video cable (HDMI, DisplayPort, or VGA) where it connects to both the monitor and the computer, and reseat it firmly if it is loose.
- Restart your computer if the screen stays black after checking cables and trying to wake the monitor.
- If the monitor has a brightness dial or button, turn it up — a very dim screen can look black.
Check the power cable and outlet first
Before you do anything else, make sure the monitor actually has power. Look at the back of the monitor where the power cable plugs in. Push it in firmly — cables can work loose from vibration or being bumped. Then follow the cable to the wall outlet and make sure it is plugged in there too.
If the outlet itself is the problem, you may not see any sign of it. Test the outlet by plugging in something else you know works — a lamp, a phone charger, anything. If that device does not work either, the outlet is dead. Try a different outlet in the same room, or ask someone to check whether the circuit breaker for that outlet has been tripped.
Look for a small light on the monitor itself — usually near the power button. If there is no light at all, the monitor is not getting power. If there is a light, the monitor has power and the problem is something else.
Wake the monitor from sleep mode
Monitors go to sleep automatically after a set time of no activity — usually 10 to 30 minutes. When this happens, the screen goes black but the monitor is still on. Move your mouse, click the mouse button, or press any key on the keyboard. The screen should come back when ready.
If that does not work, press the power button on the monitor itself. Some monitors need a full power cycle to wake up properly. Wait a few seconds, then press the power button again to turn it back on.
Reseat the video cable
The cable that carries the picture from your computer to the monitor can come loose without you noticing. Look at the back of the monitor and find where the video cable plugs in. It will be labeled HDMI, DisplayPort, DVI, or VGA depending on your setup. Gently pull the cable straight out, then push it back in firmly until you hear or feel a click.
Now check the other end of the cable where it plugs into your computer. The same thing can happen there. Pull it out and reseat it firmly. If the cable has a screw collar (older VGA cables often do), tighten it by hand after plugging it back in.
If you have more than one video port on your computer, your monitor might be plugged into the wrong one. Unplug the cable and try a different port. Some computers have multiple graphics outputs and only one of them is active at a time.
Check the monitor brightness and input source
Most monitors have a brightness control — either a dial on the side, buttons on the front, or a menu you access by pressing a button labeled Menu. If the brightness is turned all the way down, the screen will be black even though the monitor is working. Turn the brightness up and see if the picture appears.
Monitors also have an input source setting, usually accessed through the same Menu button. This tells the monitor which cable to listen to — HDMI 1, HDMI 2, DisplayPort, or VGA. If you have multiple cables plugged in, the monitor might be looking at the wrong one. Press the Menu button and look for an option called Input, Source, or Signal. Cycle through the options until you see a picture.
Restart your computer
If the monitor has power, the cables are seated, and the brightness is turned up, the problem is likely on the computer side. Your computer may have gone to sleep, or the graphics card may have stopped responding. Restart the computer by holding the power button for 10 seconds until it shuts down completely, then press the power button again to turn it back on.
If you cannot see anything on the screen to know whether the computer is on, listen for fan noise or look for lights on the computer case. If the computer is running but the monitor is still black after restart, the graphics card may have failed. This is rare, but it does happen. At this point, you may need to have the computer looked at by someone with technical experience.
When to try a different monitor or cable
If you have access to another monitor or another video cable, you can test whether the problem is with your monitor or with your computer. Borrow a monitor from a friend or colleague and plug it in using the same cable. If the borrowed monitor works, your monitor is the problem. If it stays black, your computer is the problem.
Similarly, if you have a spare video cable, try that cable with your monitor. If the spare cable works, the original cable is damaged. If the spare cable also produces a black screen, the monitor itself is likely faulty.
Frequently Asked Questions
Why does my monitor go black only sometimes?
Intermittent black screens are usually caused by a loose cable that disconnects when the computer or monitor vibrates slightly. Check all connections and make sure cables are not bent sharply or pinched under furniture. If the problem persists, the cable itself may be damaged and need replacement.
My monitor goes black when I move the mouse — what is happening?
This is usually a sign that the cable is very loose and movement is jostling it. Reseat the video cable firmly at both ends. If the problem continues after reseating, try a different cable or a different port on your computer.
Can a power surge cause a monitor to go black?
Yes. If a monitor goes black suddenly during a storm or after a power outage, a power surge may have damaged it. Try unplugging it for 30 seconds, then plugging it back in. If it still does not work, the monitor may need replacement.
Is it safe to keep trying to fix a black screen myself?
Yes, as long as you are only checking cables and pressing buttons. Do not open the monitor case or try to repair internal parts. If the monitor does not respond to the steps in this guide, it is time to have it looked at by someone with repair experience.
My monitor is black but I can hear my computer working — what should I do?
Your computer is on but the monitor is not receiving a signal. Check that the video cable is plugged in at both ends and seated firmly. Try restarting the computer. If the screen stays black, try a different video cable or a different port on your computer.