A cathode ray tube monitor uses an electron beam to paint images on a glass screen

A cathode ray tube (CRT) monitor is a display that creates images by firing a beam of electrons at the back of a glass screen coated with phosphor. The beam moves rapidly across the screen in horizontal lines, starting at the top left and moving right, then jumping back to start the next line below. This happens so fast — typically 60 times per second — that your eye sees a complete, stable picture instead of a moving dot.

CRT monitors were the standard display type for computers and televisions from the 1950s through the early 2000s. They are now rare in new equipment, but many still exist in homes, schools, and offices. Understanding how they work helps explain why they look and behave differently from modern flat-screen monitors, and why they have different setup requirements.

Key Takeaways

  • CRT monitors create images by directing an electron beam across a phosphor-coated glass screen, line by line, many times per second.
  • The screen size of a CRT monitor is measured diagonally, but the actual viewable area is smaller than the stated size because the edges are hidden behind the bezel.
  • CRT monitors are heavier and deeper than flat-screen monitors of the same apparent size, and they require more desk space.
  • CRT monitors can display different resolutions and refresh rates, and changing these settings may require adjusting physical controls on the monitor itself.
  • CRT monitors emit a small amount of radiation and can generate electromagnetic fields, which is why they are positioned away from the user's body during extended use.

How the electron beam creates the image

Inside a CRT monitor, an electron gun at the back of the tube fires a narrow beam of electrons toward the front screen. The screen's inner surface is coated with phosphor, a material that glows when struck by electrons. The brightness of the glow depends on the strength of the beam — a stronger beam creates a brighter spot, a weaker beam creates a dimmer spot.

Two sets of electromagnets, called deflection coils, bend the electron beam as it travels. The horizontal deflection coils move the beam left and right across the screen, while the vertical deflection coils move it up and down. Together, they steer the beam in a precise pattern: it starts at the top left, moves horizontally to the right edge, then jumps back to the left and drops down one line. This pattern repeats from top to bottom, then starts over at the top. One complete cycle is called a refresh, and the number of refreshes per second is the refresh rate.

The phosphor coating glows only briefly after the electron beam passes, so the image fades quickly. To keep the image visible, the beam must refresh the entire screen many times per second. If the refresh rate is too slow — below about 50 times per second — the screen appears to flicker noticeably, which causes eye strain. Higher refresh rates, such as 75 or 85 hertz, produce a steadier image.

Screen size and viewable area are not the same

CRT monitor sizes are stated as diagonal measurements across the screen, just like modern monitors. A 17-inch CRT monitor has a diagonal measurement of 17 inches from corner to corner. However, the actual viewable area is smaller because the edges of the screen are hidden behind the plastic or metal frame, called the bezel. A 17-inch CRT typically has a viewable area closer to 15.5 inches.

This difference matters when comparing a CRT monitor to a modern flat-screen monitor of the same stated size. A 17-inch CRT and a 17-inch flat-screen monitor do not display the same amount of content, because the CRT's bezel takes up more space. When choosing a CRT monitor, check the specifications for the viewable area rather than relying on the stated screen size alone.

Physical size and weight are much larger than flat screens

CRT monitors are significantly deeper than flat-screen monitors. A 17-inch CRT monitor typically extends 16 to 18 inches from front to back, while a modern 17-inch flat-screen monitor is usually 2 to 4 inches deep. This depth is necessary because the electron gun and deflection coils must be positioned far enough behind the screen to create a properly focused image.

CRT monitors are also much heavier. A 17-inch CRT monitor typically weighs 40 to 50 pounds, while a modern flat-screen monitor of similar size weighs 5 to 8 pounds. This weight comes from the thick glass tube, the metal frame, and the power supply needed to generate the high voltages required for the electron gun. If you are setting up a CRT monitor, plan for a sturdy desk and consider the effort required to move it.

Resolution and refresh rate controls are often physical buttons

Modern monitors change resolution and refresh rate through software settings in your operating system. CRT monitors often require physical adjustments as well. Many CRT monitors have buttons or dials on the front or side that control focus, brightness, contrast, and horizontal or vertical position. Some monitors also have a menu system accessed through buttons that allows you to change the refresh rate or resolution directly on the monitor itself.

When you change the resolution or refresh rate in your computer's display settings, the CRT monitor must adjust its deflection coils to match the new signal. If the monitor cannot adjust properly, the image may appear distorted, off-center, or out of focus. Using the physical controls to fine-tune the image is often necessary, especially when switching between different resolutions or refresh rates.

If you are using a CRT monitor with a modern computer, check whether the monitor's manual is available online. The manual will explain which buttons control which settings and what range of resolutions and refresh rates the monitor supports. Not all CRT monitors support the same refresh rates at all resolutions, so knowing your monitor's specifications prevents you from selecting settings that the monitor cannot display.

Radiation and electromagnetic fields are a consideration

CRT monitors emit a small amount of ionizing radiation from the electron gun and the high-voltage power supply. The amount is well below safety limits set by regulatory agencies, and the glass tube itself blocks most of the radiation. However, CRT monitors do emit electromagnetic fields, which are stronger near the back and sides of the monitor than near the front.

For this reason, CRT monitors are typically positioned so that the back and sides face away from where people sit for extended periods. If you are setting up a CRT monitor in a shared space, such as a classroom or office, position it so that people do not sit directly behind it or to the sides of it for long periods. Positioning the monitor at arm's length in front of you, as you would with any monitor, is the standard safe practice.

CRT monitors require more maintenance than flat screens

The phosphor coating on a CRT screen gradually loses its brightness over time, a process called phosphor aging. After several years of use, the image may appear dimmer even at maximum brightness settings. This is normal and cannot be reversed. Eventually, the monitor becomes too dim to use comfortably, and replacement is the only option.

CRT monitors also accumulate dust inside the tube and on the deflection coils, which can affect image quality and cooling. Unlike flat-screen monitors, CRT monitors should not be opened for cleaning by the user, because the tube contains high-voltage components that can cause serious injury even when the monitor is unplugged. If a CRT monitor requires internal cleaning, it should be serviced by a may have access to technician.

The external screen can be cleaned with a soft, dry cloth or a cloth slightly dampened with water. Do not use solvents or abrasive cleaners, as these can damage the phosphor coating and the anti-glare treatment on the screen surface.

Frequently Asked Questions

Why do CRT monitors flicker?

CRT monitors flicker when the refresh rate is too low — typically below 50 hertz. The phosphor coating fades quickly after the electron beam passes, so if the beam does not return often enough, the image appears to blink on and off. Increasing the refresh rate to 75 hertz or higher eliminates flicker for most people. Check your monitor's manual to see what refresh rates it supports at your current resolution.

Can I use a CRT monitor with a modern computer?

Yes, but you may need an adapter. Modern computers use digital video outputs like HDMI or DisplayPort, while CRT monitors use analog VGA connections. A digital-to-analog converter can bridge this gap, but the monitor must support the resolution and refresh rate your computer is sending. Check the monitor's specifications before purchasing an adapter.

What does the bezel do?

The bezel is the plastic or metal frame around the screen that holds the tube in place and protects the edges. It also hides the parts of the screen that cannot display a proper image because the electron beam cannot reach them. The bezel is why the viewable area of a CRT monitor is smaller than its stated screen size.

Is it safe to sit in front of a CRT monitor all day?

Yes, when positioned correctly. Sit at arm's length from the screen with the monitor at or slightly below eye level. Position the back and sides of the monitor away from where other people sit. The radiation and electromagnetic field emissions from a CRT monitor are within safety limits, and proper positioning reduces exposure further.

Why are CRT monitors so heavy?

The thick glass tube, metal frame, and high-voltage power supply all add significant weight. The glass tube must be thick enough to withstand the internal pressure and to focus the electron beam properly. The power supply must generate thousands of volts to operate the electron gun. These components cannot be made lighter without compromising the monitor's function or safety.