Disabling color correction shows you the monitor's raw output, which is usually worse than what you see with it on
Color correction is a filter that adjusts what your monitor displays to match a standard. When you disable it, you remove that adjustment layer. The result depends on what correction was doing: if it was compensating for the monitor's natural color cast, turning it off makes colors look wrong — typically too warm (orange-yellow) or too cool (blue) depending on your panel type. If the correction was doing nothing useful for your work, disabling it might not change much at all.
Most people should leave color correction on. It exists because monitors naturally drift from neutral color. Disabling it is useful only if you are doing color-critical work and you have already calibrated your monitor to a known standard — in which case you turn off the monitor's built-in correction to avoid double-correction.
Key Takeaways
- Disabling color correction removes the monitor's adjustment layer, usually making colors look more orange, blue, or otherwise skewed depending on your panel type.
- Most monitors ship with color correction on because it makes the display look more neutral than the raw panel output.
- Turn off color correction only if you have calibrated your monitor to a professional standard and need to avoid the monitor's correction interfering with that calibration.
- If you disable color correction and colors look wrong, turning it back on will restore the appearance — no permanent change happens.
- Casual users, gamers, and office workers should keep color correction enabled unless a specific workflow requires disabling it.
Why monitors have color correction in the first place
LCD and LED panels do not naturally produce perfectly neutral color. A panel might have a blue tint in the shadows, a yellow cast in the midtones, or uneven color across the screen. Manufacturers add color correction — sometimes called color management or color tuning — to push the raw output closer to a neutral standard like sRGB or Rec. 709.
This correction is baked into the monitor's firmware. It runs automatically on every pixel the monitor displays. You do not see the correction happening; you see the result. Without it, most monitors would look noticeably off-color to human eyes, especially if you compare them side by side.
The correction is not perfect. It is a compromise tuned for typical viewing conditions and typical content. But it is better than nothing, which is why it ships enabled.
What you actually see when color correction is off
The visual change depends on your specific monitor and panel type. IPS panels often have a slight warm (yellow-orange) cast when correction is disabled. VA panels often look cooler (more blue). TN panels vary widely. The shift is usually noticeable within a few seconds of looking at a white background or a neutral gray.
You might also notice that colors feel less balanced — reds might look more orange, blues might look more purple, and the overall image might feel like it has a color temperature that is too warm or too cool. Skin tones often look wrong first, because human eyes are very sensitive to skin tone accuracy.
If you are working with photos, video, or graphics, the change is usually obvious and unpleasant. If you are reading text or browsing the web, you might not notice much, or you might notice a shift that feels uncomfortable after a few minutes.
When you should disable color correction
The main reason to disable color correction is if you have calibrated your monitor using external hardware — a colorimeter or spectrophotometer — and loaded a custom color profile into your operating system. In that case, your computer is already sending corrected color data to the monitor. If the monitor then applies its own correction on top, you get double-correction, and colors will be wrong.
Professional color work — photo editing, video grading, graphic design for print — sometimes requires this setup. You calibrate the monitor, create a profile, and then disable the monitor's built-in correction so only your profile is active. This gives you predictable, repeatable color.
Outside of that scenario, there is no practical reason to disable color correction. Gamers do not need to. Office workers do not need to. Casual users do not need to. If you are not actively managing color profiles, leave it on.
How to turn color correction back on if you change your mind
Disabling color correction does not damage anything. It is a software setting, not a hardware change. If you turn it off and decide you do not like how it looks, you can turn it back on when ready in the same menu where you disabled it.
On most monitors, color correction lives in the on-screen menu (OSD). Press the menu button on the monitor itself, look for a section called Color, Color Management, Color Correction, or Color Tuning, and toggle the setting. The exact name and location vary by manufacturer — Dell, LG, ASUS, BenQ, and others all organize their menus differently.
If you cannot find it in the monitor menu, check your graphics card control panel. NVIDIA, AMD, and Intel all have color management tools in their driver software. You can also adjust color correction through your operating system's display settings, though this is less common on Windows and Mac.
The difference between color correction and brightness or contrast
Color correction is not the same as brightness or contrast. Brightness and contrast are straightforward adjustments that make the image lighter or darker, or increase or decrease the difference between light and dark areas. Color correction is more specific — it adjusts the color balance and tone curve to match a standard.
You can have color correction on and still adjust brightness and contrast separately. They are independent settings. Disabling color correction does not change your brightness or contrast settings, and vice versa.
If you want the image to look brighter or darker, adjust brightness. If you want colors to look more neutral, make sure color correction is on. If you want to fine-tune color for professional work, you need both color correction disabled and a custom color profile loaded.
What happens if your monitor does not have color correction
Older monitors, very cheap monitors, and some specialized displays do not have built-in color correction. In those cases, the setting does not exist, and you cannot disable it. The monitor straightforward displays whatever color the panel naturally produces.
If you are using a monitor without color correction and the colors look off, you have two options: load a color profile through your operating system or graphics driver, or accept that the monitor's color is not neutral. Most people in this situation just accept it, because the cost of adding color correction in software is usually not worth it for casual use.
Frequently Asked Questions
Will disabling color correction make my monitor brighter or darker?
Not necessarily. Color correction adjusts color balance, not brightness. However, some monitors bundle brightness and color correction together, so disabling one might affect the other depending on the monitor's design. Check your monitor's menu to see if they are linked.
Does color correction affect gaming performance?
No. Color correction is applied by the monitor's processor, not your graphics card. It does not use any of your computer's resources and does not reduce frame rates or cause lag.
Can I disable color correction just for certain programs?
Not through the monitor itself — the monitor's correction applies to everything. However, you can use your operating system or graphics driver to load different color profiles for different programs, which is a more advanced technique used mainly by professionals.
What is the difference between disabling color correction and using a different color mode?
Many monitors have preset color modes like Standard, Warm, Cool, or Movie. These are different color corrections, not the absence of correction. Disabling color correction entirely removes all correction. Switching between modes keeps correction on but changes what standard it is correcting toward.
If I disable color correction, will my monitor look like a professional display?
No. Professional displays are calibrated to very tight tolerances and often have their own advanced color correction built in. Disabling correction on a consumer monitor just makes it look wrong, not professional.