Vertical sync reduces screen tearing but adds input delay

Vertical sync (or V-sync) is a graphics setting that locks your frame rate to your monitor's refresh rate. When you turn it on, your graphics card waits for the monitor to finish drawing one complete image before sending the next one. This prevents the screen from displaying parts of two different frames at the same time — a visual glitch called screen tearing.

The trade-off is real: vertical sync introduces a small delay between your input (mouse click, keyboard press) and what appears on screen. For most everyday tasks and slower games, you won't notice this delay. For competitive shooters or fast-paced games where reaction time matters, even a few milliseconds can affect your performance.

Whether vertical sync is "good" depends entirely on what you're doing. It solves a problem you may not have, and creates a different problem you might care about more.

Key Takeaways

  • Vertical sync eliminates screen tearing by syncing your frame rate to your monitor's refresh rate, but it adds a small delay between your input and what you see.
  • For office work, web browsing, and video playback, vertical sync has no practical effect and you can leave it off without noticing any difference.
  • In competitive games where reaction time matters, the input delay from vertical sync can measurably affect your performance.
  • Modern graphics cards offer alternatives like G-Sync (NVIDIA) and FreeSync (AMD) that reduce tearing without adding the same input delay as traditional vertical sync.
  • If your frame rate stays above your monitor's refresh rate, you'll see tearing whether vertical sync is on or off — you need either adaptive sync or a faster monitor.

When screen tearing actually happens

Screen tearing occurs when your graphics card sends a new frame to your monitor before the monitor finishes displaying the previous one. The monitor ends up showing the bottom half of one frame and the top half of the next frame simultaneously, creating a visible horizontal line across the screen.

This only happens when your frame rate exceeds your monitor's refresh rate. If your monitor refreshes 60 times per second and your graphics card is producing 100 frames per second, the card is sending frames faster than the monitor can display them. Vertical sync prevents this by making the graphics card wait.

If your frame rate is already below your monitor's refresh rate — say, 45 frames per second on a 60 Hz monitor — you won't see tearing at all, and vertical sync won't change anything. The monitor straightforward displays each frame as it arrives.

The input delay problem in games

When vertical sync is on, your graphics card doesn't send a frame when ready. It waits for a signal from the monitor saying "I'm ready for the next image." This waiting period is the input delay. In a 60 Hz monitor, this delay can be anywhere from 0 to 16 milliseconds, depending on when your input arrives relative to the monitor's refresh cycle.

In slower games, turn-based strategy games, or any game where you're not in direct combat, this delay is imperceptible. You click a button and the action happens so quickly that the extra milliseconds don't matter. In competitive shooters like Counter-Strike or Valorant, where professional players react in under 100 milliseconds, an extra 8 to 16 milliseconds is measurable and can cost you the round.

The delay also feels worse when you're moving the mouse. Your cursor movement becomes slightly sluggish because the mouse input is processed, but the screen update is held back waiting for the monitor's refresh cycle.

Adaptive sync: the better solution for gaming

If you have an NVIDIA graphics card, G-Sync is a technology that lets your monitor adjust its refresh rate to match your frame rate, rather than forcing your frame rate to match the monitor. If you have an AMD card, FreeSync does the same thing. Both eliminate tearing without the input delay of traditional vertical sync.

The catch is that your monitor must support the technology. G-Sync monitors are more expensive than standard monitors, and FreeSync monitors vary widely in quality. If you're shopping for a new monitor and you game competitively, a G-Sync or FreeSync monitor is worth the extra cost. If you already have a standard monitor, you're choosing between tearing and input delay.

Adaptive sync works best when your frame rate is unstable — bouncing between 80 and 120 frames per second, for example. It keeps the image smooth without locking you into a fixed frame rate. If your frame rate is already stable and high, the benefit is smaller.

What vertical sync does to different types of work

For office work, web browsing, photo editing, and video playback, vertical sync makes no practical difference. You're not producing frame rates high enough to cause tearing, and the input delay doesn't matter because you're not in a time-sensitive task. Leave it off and don't think about it.

For video editing and 3D rendering, vertical sync is irrelevant while you're working — you're not watching real-time playback. When you do preview your work, tearing is a minor cosmetic issue that doesn't affect the final output. Turn it off to get more responsive scrubbing through your timeline.

For streaming or content creation, vertical sync can actually hurt you. Streamers often run high frame rates (120 to 240 fps) to have a buffer of frames to encode and send. Vertical sync would lock you to your monitor's refresh rate and waste that buffer. Leave it off.

How to find and change vertical sync settings

Vertical sync lives in three places: your graphics card control panel, your game's settings menu, or your monitor's on-screen menu. Check your game first — most games have a V-sync toggle in the graphics or display settings, usually labeled "Vertical Sync" or "VSync."

If your game doesn't have the option, open your graphics card control panel. NVIDIA users open NVIDIA Control Panel (search for it in Windows), go to Manage 3D Settings, and look for "Vertical Sync" in the Global Settings tab. AMD users open Radeon Settings, go to Graphics, and find the V-Sync option. You can set it globally or per-game.

Some monitors also have a V-sync option in their on-screen menu, accessed by pressing buttons on the back or side of the monitor. This is less common and usually only appears on gaming monitors. Check your monitor's manual if you're unsure.

The setting takes effect when ready — you don't need to restart your game or computer.

Choosing between tearing and input delay

If you're playing a competitive game on a standard monitor without adaptive sync, you're choosing between two problems. Screen tearing is a visual artifact that doesn't affect gameplay — you see a line across the screen, but your character still moves and shoots normally. Input delay actually changes how the game responds to your commands.

Most competitive gamers choose to accept tearing and turn off vertical sync, because they prioritize responsiveness. Casual gamers often prefer vertical sync because the smoother image feels better, even if it costs a few milliseconds of responsiveness.

The best long-term solution is upgrading to a monitor with adaptive sync (G-Sync or FreeSync) if you game regularly. Until then, test both settings in your game and see which one bothers you less. There's no objectively correct answer — it depends on what you notice and what matters to you.

Frequently Asked Questions

Does vertical sync reduce my frame rate?

Yes, it locks your frame rate to your monitor's refresh rate. If your monitor is 60 Hz, vertical sync caps your frame rate at 60 fps. If your graphics card was producing 120 fps, it now produces 60 fps. This is intentional — it's how vertical sync prevents tearing.

Will turning off vertical sync damage my monitor?

No. Screen tearing is a visual glitch, not a hardware problem. Your monitor is not harmed by displaying torn frames. Turning off vertical sync is completely safe.

What's the difference between vertical sync and adaptive sync?

Vertical sync locks your frame rate to your monitor's fixed refresh rate, which adds input delay. Adaptive sync (G-Sync or FreeSync) lets your monitor's refresh rate adjust to match your frame rate, eliminating tearing without the input delay. Adaptive sync requires a compatible monitor.

Should I use vertical sync if I have a high refresh rate monitor?

High refresh rate monitors (144 Hz or higher) reduce input delay because the refresh cycle is shorter. At 144 Hz, the maximum input delay from vertical sync is about 7 milliseconds instead of 16. Many competitive gamers with high refresh rate monitors still turn off vertical sync to eliminate it entirely, but the difference is smaller than on a 60 Hz monitor.

Can I use vertical sync and adaptive sync at the same time?

No. If you have G-Sync or FreeSync enabled, turn off traditional vertical sync. Adaptive sync already handles frame synchronization, and adding vertical sync on top of it can cause stuttering or other issues.