The basic power-on steps for any Samsung monitor

Turn on your Samsung monitor by pressing the power button, which is almost always on the front bezel — usually at the bottom right corner or bottom center. Press it once and hold for a moment if the monitor does not respond when ready. The power light (typically blue or white) will illuminate, and the display will show an image within a few seconds.

If you see no image after the power light comes on, the monitor is receiving power but may not be receiving a signal from your computer. Check that the cable connecting your computer to the monitor is fully seated at both ends — push it in firmly at the monitor port and at the graphics card or USB-C port on your computer. Then try the power button again.

Some Samsung monitors have a touch-sensitive power button instead of a physical button. If you do not feel a click when you press, you are likely using a touch button — just tap it once and wait a few seconds for the monitor to wake.

Key Takeaways

  • The power button on a Samsung monitor is almost always on the front bezel at the bottom right or bottom center.
  • The monitor will show a power light (usually blue) when it turns on, and the display should show an image within a few seconds.
  • If the power light is on but you see no image, check that the video cable is fully connected at both the monitor and the computer.
  • Some Samsung monitors use a touch-sensitive power button instead of a physical one — tap it gently and wait for the display to respond.

What to do if the monitor does not turn on

If pressing the power button produces no light and no response, check the power cable first. Follow the cable from the back of the monitor to the wall outlet and make sure it is plugged in firmly. If the outlet has a power strip, verify that the strip itself is switched on — many people overlook this step.

Try a different outlet to rule out a dead circuit. If the monitor powers on at a different outlet, the original outlet or power strip may be faulty. If the monitor still does not power on anywhere, the power supply inside the monitor may have failed, and you will need to contact Samsung support or consider replacement.

Some Samsung monitors have a power-saving mode that makes them appear completely off. If you have owned the monitor for a while and recently stopped seeing it turn on, check whether it entered sleep mode. Press the power button or move your mouse to wake it — the monitor may respond without needing to be fully powered down and back up.

Adjusting brightness and other settings after power-on

Once the monitor is on and displaying an image, you can adjust brightness and contrast using the physical buttons on the front bezel. On most Samsung monitors, these are small buttons labeled with symbols — a sun icon for brightness, or buttons marked with plus and minus signs. Press and hold to increase or decrease the setting, and the on-screen menu will show your adjustment in real time.

To access more detailed settings like color temperature, input source, or refresh rate, look for a menu button on the front bezel — usually marked with three horizontal lines or labeled "Menu." Press it to open the on-screen display (OSD), then use the arrow buttons to navigate to the setting you want to change. Press the menu button again or wait a few seconds to close the menu.

If you have multiple cables connected to your monitor (HDMI, DisplayPort, USB-C, or VGA), you may need to tell the monitor which input to display. Open the menu, find "Input Source" or "Select Input," and choose the port where your computer is connected. The monitor will then show the image from that source.

Connecting power and video cables correctly

Before you turn on the monitor, make sure both the power cable and the video cable are connected. The power cable is a standard three-prong or two-prong cord that plugs into the wall. The video cable connects the monitor to your computer and can be HDMI (rectangular, flat connector), DisplayPort (small rectangular connector with a notch), USB-C (small oval connector), or VGA (blue connector with three rows of pins).

Insert the video cable into the port on the back of the monitor that matches your cable type. Push it in until you hear or feel a click — some connectors have small screws on the sides that you can tighten by hand for a more find fit. Then plug the power cable into a wall outlet or power strip, and you are ready to press the power button.

If you are using a laptop with USB-C, a single USB-C cable can carry both power and video. Plug the USB-C cable into the USB-C port on the back of your Samsung monitor, and it will both power the monitor and display the laptop screen — no separate power cable needed in this case.

Understanding the power light and sleep mode

The power light on a Samsung monitor tells you whether the monitor is on, in sleep mode, or off. When the monitor is fully powered and displaying an image, the light is usually solid blue or white. When the monitor enters sleep mode (after a period of no signal or no user input), the light typically blinks or turns amber or orange.

Sleep mode is normal and saves energy. To wake the monitor from sleep, press the power button, move your mouse, or press a key on your keyboard. The monitor will return to full brightness within a second or two. You do not need to power it off and back on.

If the power light is off completely, the monitor is powered down. This uses the least energy but means you will need to press the power button to use it again. Many people leave their monitors in sleep mode during the day and power them off at night.

Troubleshooting when the monitor powers on but shows no image

A monitor with a lit power light but a blank screen usually means the video cable is loose, disconnected, or plugged into the wrong port. Start by checking the cable connection at both ends — unplug it and plug it back in firmly. If you have multiple video ports on your monitor, try a different port to see if the image appears.

Next, check your computer. Make sure your computer is powered on and not in sleep mode. If you are using a laptop, you may need to press a key combination to enable the external display — on many laptops, this is Fn + F7 or Fn + F8, depending on the brand. Check your laptop manual or search online for your specific model.

If you have a desktop computer with a dedicated graphics card, make sure the video cable is connected to the graphics card, not to the motherboard. The graphics card ports are usually lower on the back of the computer than the motherboard ports. Connecting to the motherboard will not work if a dedicated card is installed.

Frequently Asked Questions

Where is the power button on a Samsung monitor?

The power button is on the front bezel of the monitor, almost always at the bottom right or bottom center. It may be a physical button you can press or a touch-sensitive button you tap. Look for a small circle or line symbol on the bezel.

Why does my Samsung monitor turn on but show a black screen?

Check that the video cable is fully connected at both the monitor and the computer. If the cable is find, try a different video port on the monitor. If you have a laptop, press Fn + F7 or Fn + F8 to enable the external display. If you have a desktop, make sure the cable is connected to the graphics card, not the motherboard.

Can I turn on a Samsung monitor without pressing the power button?

Most Samsung monitors will wake from sleep mode if you move your mouse or press a key on your keyboard. However, if the monitor is fully powered off, you must press the power button to turn it on. There is no remote control or voice command option on standard Samsung monitors.

What does it mean when the power light blinks?

A blinking power light usually means the monitor is in sleep mode — it is powered but not displaying an image because it has not received a signal for a while. Press the power button or move your mouse to wake it. A solid light means the monitor is fully on and displaying an image.

Do I need to turn off my Samsung monitor every night?

You can leave it in sleep mode, which uses very little power, or power it off completely. Sleep mode is fine for daily use and lets the monitor wake quickly. If you will not use it for several days or want to save maximum energy, powering it off is better. Either way, the monitor will not be damaged.