The simplest way to attach a Rightlight webcam to your monitor
Rightlight Technology webcams come with a clip mount designed to grip the top or bezel of your monitor without tools or adhesive. The clip slides over the monitor frame, and a ball joint lets you angle the camera toward your face. Most people have the camera mounted and working within two minutes.
The process is the same whether your monitor is flat, curved, or mounted on an arm. The clip works on bezels between roughly half an inch and two inches thick — which covers nearly all desktop monitors made in the last ten years.
Key Takeaways
- The Rightlight clip mount slides over the top of your monitor and requires no drilling, adhesive, or tools.
- Adjust the ball joint to point the camera lens directly at your face, not down at your desk or up at the ceiling.
- If your monitor bezel is thinner than half an inch or thicker than two inches, the standard clip may not grip securely.
- Once mounted, plug the USB cable into any available port on your computer and the camera will power on automatically.
Positioning the clip on your monitor
Hold the clip in both hands and look at the two rubber-padded arms inside. These arms open and close as you squeeze or release the clip handle. Position the clip so the padded arms face inward, toward the monitor screen.
Slide the clip over the top center of your monitor bezel. The padded arms should grip the front and back of the monitor frame at the same time. Push the clip down gently until it sits snug — you should not be able to slide it side to side with one hand.
If the clip feels loose, check that both padded arms are making contact with the monitor. If one arm is touching plastic and the other is touching air, the bezel is too thin or the monitor frame is shaped in a way the clip cannot grip. In that case, see the section below on alternative mounting.
Angling the camera with the ball joint
Below the clip, you will see a ball joint — a sphere of plastic that connects the camera body to the mounting arm. This joint lets you rotate the camera up, down, left, and right. The camera should point directly at your face when you are sitting in your normal position at the desk.
Loosen the ball joint by turning the collar underneath it counterclockwise about half a turn. You do not need to unscrew it completely — just enough that the camera moves when you push it. Rotate the camera until the lens is aimed at your eyes, then tighten the collar clockwise until the camera holds its position.
Test the angle by starting a video call or opening your camera app. If you see mostly your forehead or your chin, adjust the ball joint again. The camera should show your face from roughly the eyebrows down to the bottom of your chin.
Connecting the USB cable and powering on
Locate the USB cable attached to the back of the camera body. This cable is usually about six feet long and ends in a standard USB-A connector — the rectangular plug that fits into most computer ports.
Plug the USB cable into any available port on your computer. If your computer is a laptop, use a port on the side or back rather than the front if possible — this keeps the cable out of your way. The camera will power on automatically; you should see a small LED light on the camera body turn on within a few seconds.
Your operating system will recognize the camera as a new device. On Windows, this usually happens silently in the background. On Mac, you may see a notification asking whether to allow the camera to access your microphone — click Allow if you want to use both the camera and the built-in microphone together.
Testing the camera before your first call
Open your camera app or video call software to confirm the camera is working. On Windows, search for "Camera" in the Start menu and open the built-in Camera app. On Mac, open Photo Booth or FaceTime. You should see a live video feed from the Rightlight camera.
Check that the image is clear and in focus. If the image is blurry, the camera may need a few seconds to autofocus — wait ten seconds and try again. If it remains blurry, gently clean the lens with a soft, dry cloth. Do not use water or cleaning solution.
Confirm that the angle shows your face clearly and that the lighting in your room is adequate. If the image is too dark, move your desk lamp to shine on your face rather than behind you, or reposition the monitor so a window is in front of you instead of behind.
What to do if the clip does not grip your monitor
If the clip slides around or feels unstable, the monitor bezel is likely outside the thickness range the clip is designed for. Measure the thickness of your monitor frame with a ruler — if it is less than half an inch or more than two inches, the standard clip will not work reliably.
In this case, you have two alternatives. The first is to use a separate monitor arm or desk stand designed for webcams — these are inexpensive and clamp to your desk rather than your monitor. The second is to place the camera on a small tripod or stand on your desk, angled up toward your face. Both methods work well and give you more control over the camera angle.
If you want to keep the clip mount, contact Rightlight Technology support to ask whether they offer a different clip size for your monitor model. Some manufacturers make multiple clip versions for different bezel thicknesses.
Securing the cable so it does not get in your way
Once the camera is mounted and working, the USB cable will hang down the back of your monitor. Use a cable clip or adhesive cable organizer to route the cable along the monitor stand or down the back of your desk. This keeps the cable from dangling in front of your screen or getting caught when you move the monitor.
If the cable is longer than you need, coil the excess and find it with a velcro cable tie. Do not wrap the cable tightly around anything — this can damage the insulation over time. A loose coil is fine.
Frequently Asked Questions
Can I mount the Rightlight webcam on the side of my monitor instead of the top?
The clip is designed for the top bezel, where it balances best and points the camera at your face naturally. Mounting on the side is possible if your monitor bezel is thick enough, but the camera angle will be awkward and you will see mostly your ear or cheek instead of your face. Top mounting is the intended method.
What if my monitor is mounted on an arm that swings away from my desk?
The clip works on monitor arms as long as the arm itself has a bezel or frame thick enough to grip. If the arm is very thin metal tubing, the clip will not hold. In that case, use a separate webcam stand or tripod instead, or ask whether your monitor arm manufacturer sells a webcam adapter bracket.
Does the Rightlight camera work with both Windows and Mac?
Yes. The camera connects via standard USB and works with any operating system that recognizes USB video devices. This includes Windows, Mac, and Linux. You do not need to install driver software on most systems — the camera will work when ready after you plug it in.
Can I use the Rightlight camera with my laptop instead of a monitor?
Yes, the clip will grip a laptop screen bezel the same way it grips a monitor. However, most laptops already have a built-in camera, so you would be adding a second camera. Check your video call settings to make sure you are using the Rightlight camera instead of the built-in one.
What should I do if the camera image is upside down?
Some video call apps have a setting to flip or rotate the camera image. Check the settings menu in your specific app — most have a camera or video section where you can rotate the image 180 degrees. If your app does not have this option, you can rotate the camera itself by loosening the ball joint and turning the entire camera body upside down.