What causes lines on your monitor screen

Lines running across or down your monitor usually come from one of three sources: a loose cable connection, interference from nearby electronics, or a failing display panel. Most of the time it is the cable — either the one plugged into your monitor or the one inside your computer connecting the graphics card to the motherboard. The second most common cause is electromagnetic interference, which happens when a phone charger, microwave, or wireless router sits too close to your monitor cable. A genuinely broken panel is less common but possible if your monitor is old or was physically damaged.

The pattern of the lines tells you something useful. Horizontal lines that flicker or move suggest a cable problem or interference. Vertical lines that stay in the same place suggest a panel issue. Lines that appear only when you move your mouse or use certain programs point to a graphics driver or software problem rather than hardware.

Key Takeaways

  • Start by checking the cable connections at both the monitor and the computer — a loose connection causes most line problems and takes 30 seconds to fix.
  • Move your monitor cable away from phone chargers, power adapters, and wireless routers, which can create interference that shows as flickering lines.
  • Update your graphics driver through your computer's device manager or the manufacturer's website, since outdated drivers sometimes cause line artifacts.
  • Test with a different cable if you have one available, because a damaged cable often looks fine but carries a bad signal.
  • If lines persist after checking connections and moving interference sources, the monitor panel itself may be failing and replacement is usually the only fix.

Reseat your cable connections

Unplug the cable that runs from your monitor to your computer at both ends. Look at the connectors — they should be clean and the pins (if it is a VGA or DVI cable) should not be bent. Plug the cable back in firmly at the monitor end first, then at the computer end. You should hear or feel a small click when a cable connector seats properly. Wait 10 seconds, then turn your monitor back on.

If your monitor uses a USB-C, HDMI, or DisplayPort cable, the connection should be snug but not forced. If you are using an adapter (for example, USB-C to HDMI), unplug and reseat that as well. Many line problems disappear after this step alone because a cable that looks connected is sometimes only making partial contact.

Move interference sources away from your monitor cable

Electromagnetic interference from nearby devices can cause flickering lines or a shimmering pattern across your screen. The most common culprits are phone chargers, laptop power adapters, and wireless routers. Move your monitor cable at least 12 inches away from these devices, and if possible, route it away from power cords running along your desk.

If your monitor cable runs along the back of your desk near a power strip, try moving it to the opposite side or wrapping it in a cable sleeve. Microwave ovens and some older fluorescent lights can also cause interference, though you are less likely to have those directly next to your monitor. If moving the cable reduces the lines, you have found the problem — keep the cable separated from the interference source going forward.

Test with a different cable

A cable can look fine but carry a damaged signal. If you have another monitor cable of the same type (HDMI, DisplayPort, USB-C, or whatever your monitor uses), swap it in and see whether the lines disappear. Many people have spare cables in a drawer or can borrow one temporarily.

If the lines go away with a different cable, your original cable is damaged and should be replaced. A new cable of the correct type usually costs between $10 and $30. If the lines remain with a different cable, the problem is not the cable itself.

Update your graphics driver

Lines that appear only when you are using certain programs, or that move when you move your mouse, sometimes come from an outdated or corrupted graphics driver. On Windows, right-click the Start button and open Device Manager. Find Display adapters, right-click your graphics card (it will say NVIDIA, AMD, or Intel), and select Update driver. Choose Search automatically for updated driver software and let Windows install any updates it finds.

On Mac, go to System Settings, then General, then Software Update and install any available updates. After updating, restart your computer and check whether the lines are gone. If you have an NVIDIA or AMD graphics card, you can also visit their websites directly to read the latest driver for your specific card model, which sometimes has fixes that Windows Update has not yet included.

Check your monitor settings

Some monitors have a refresh rate setting that, when set incorrectly, can cause visible lines or flicker. Right-click your desktop on Windows, select Display settings, scroll down to Advanced display settings, then look for Refresh rate. Most modern monitors work best at 60 Hz, though some support higher rates. If your refresh rate is set very low (below 50 Hz), try increasing it to 60 Hz and see whether the lines improve.

You can also try adjusting the brightness and contrast on your monitor itself using the buttons on the back or side. Sometimes lines become more visible at certain brightness levels. If adjusting these settings makes the lines disappear or become much less noticeable, the monitor panel may be aging but is still usable.

When the monitor panel is failing

If you have checked the cable connections, moved interference sources, tested with a different cable, and updated your driver, and the lines remain in the same location on the screen, the monitor panel itself is likely failing. Vertical lines that do not move, or a pattern of dead pixels, usually indicate a problem inside the monitor that cannot be fixed without replacing the panel.

At this point, repair is rarely worth the cost. A new monitor of comparable quality usually costs less than professional repair, and most monitors are not designed to be serviced by users. If your monitor is still under warranty (usually one to three years), contact the manufacturer with a photo of the lines — they may replace it at no cost.

Frequently Asked Questions

Can I fix monitor lines without opening the monitor?

Yes — most line problems come from cables or interference, not from inside the monitor. Start with the steps in this guide: reseat connections, move interference sources, test a different cable, and update your driver. Only if lines persist after all of these should you consider that the panel itself is damaged.

What if lines appear only when I use a specific program?

This usually points to a graphics driver issue or a problem with how that program uses your graphics card. Update your driver first. If the lines persist, try running that program in compatibility mode (Windows) or with different graphics settings. If only one program causes lines, the monitor itself is probably fine.

Do I need to replace my monitor if it has a few lines?

Not when ready. If the lines do not spread and do not interfere with your work, you can continue using the monitor. However, lines that are getting worse or spreading across the screen suggest the panel is degrading and replacement will eventually be necessary. Take a photo now so you can track whether they change over time.

Can a power surge cause monitor lines?

Yes. If you experienced a power surge or lightning strike near your desk, it can damage the monitor's internal circuits or the cable. If lines appeared suddenly after a power event, try a different cable first. If that does not help, the monitor likely sustained internal damage and replacement is the best option.

Why do lines appear when I move my mouse?

This usually means your graphics driver is struggling to keep up or there is a software conflict. Update your driver and check whether you have multiple programs running that use heavy graphics (video editing, gaming, 3D modeling). Close unnecessary programs and see whether the lines reduce. If they persist, a driver reinstall may help.