Start with the simplest fixes first
Most monitor problems are not hardware failures — they are loose cables, wrong settings, or the monitor turned off. Before you assume the monitor is broken, check that the power cable is plugged in at both ends, that the video cable (HDMI, DisplayPort, USB-C, or VGA) is fully seated in both the monitor and the computer, and that the monitor's power button is actually on. The power light on the monitor should be solid or blue, not off or amber.
If the monitor still shows nothing, try adjusting the brightness and contrast dials on the monitor itself — many people accidentally turn brightness all the way down and think the monitor is dead. Look for physical buttons or a menu on the monitor's bezel (the plastic frame around the screen). If your monitor has an on-screen menu, pressing the menu button should bring up a display even if the video signal is not getting through.
Key Takeaways
- Check that both ends of the power cable and video cable are plugged in firmly, and that the monitor's power button is on before assuming anything is broken.
- Adjust brightness and contrast using the physical buttons on the monitor itself, since a turned-down brightness dial can look identical to a dead monitor.
- Restart your computer completely — power off, wait 10 seconds, power on — because many display problems are software-side, not monitor-side.
- If you have two video ports on your monitor, try the other one, because one port may be disabled or damaged while the other works fine.
- A monitor that shows a picture but looks wrong (dim, blurry, wrong colors) usually needs a driver update or settings change, not a replacement.
Restart your computer and check the cable connection
A full restart of your computer solves more display problems than any other single step. Power off completely — do not just put it to sleep — wait 10 seconds, then power on. While the computer is restarting, unplug the video cable from both the monitor and the computer, wait a few seconds, and plug it back in firmly. Make sure it clicks or seats all the way; a cable that looks plugged in but is actually loose will cause a black screen or "no signal" message.
If you have a desktop computer, check the back of the tower. Video cables should go into the graphics card (the separate card in the back), not into the motherboard itself. If your cable is plugged into the motherboard and you have a graphics card installed, that is why you are seeing nothing. Unplug from the motherboard port and plug into the graphics card port instead.
Try a different video cable or port
Video cables fail more often than monitors do. If you have a spare HDMI, DisplayPort, or USB-C cable, swap it in and restart the computer. If the monitor has two video ports (many have both HDMI and DisplayPort, for example), unplug from one and try the other. One port may be damaged or disabled in the monitor's settings while the other works perfectly.
If you do not have a spare cable, borrow one from a friend or from another device — a printer, external drive, or another monitor often uses the same cable type. This costs nothing and rules out the cable as the problem in minutes. If a different cable works, the original cable is faulty and should be replaced.
Update or reinstall your graphics driver
If the monitor shows a picture but it looks wrong — dim, blurry, colors are off, or the resolution is too low — the problem is usually software, not hardware. Your graphics driver is the software that tells your computer how to talk to the monitor. Outdated or corrupted drivers cause display glitches even when the monitor itself is fine.
On Windows, right-click the desktop and look for "Display settings" or "Graphics settings". Go to Settings > System > Display and scroll down to "Advanced display settings". Note the resolution and refresh rate shown there. If the resolution is much lower than your monitor's native resolution (for example, 1024 x 768 on a monitor that should display 1920 x 1080), your driver needs updating.
To update the driver, go to the manufacturer's website — NVIDIA, AMD, or Intel, depending on your graphics card — read the latest driver for your specific card and Windows version, and run the installer. Restart your computer when prompted. On Mac, go to System Preferences > Software Update and install any graphics-related updates available.
Check monitor settings and adjust resolution
Many monitors have an on-screen menu accessed by pressing a button on the bezel. Press the menu button and look for options like "Input" or "Source" — make sure the correct video port is selected. If your monitor is set to HDMI but your cable is plugged into DisplayPort, you will see a black screen even though everything is connected.
In Windows, right-click the desktop and select "Display settings". Under "Scale and layout", check the resolution. If it is set lower than the monitor's native resolution, click the dropdown and select the highest resolution available. If you do not see your monitor's native resolution listed, that usually means the driver needs updating (see the section above). After changing resolution, click "Keep changes" when prompted.
Test with a different computer or monitor
If you have access to another computer, connect your monitor to it using the same cable. If the monitor works on the other computer, the problem is with your original computer or its graphics card, not the monitor. If the monitor does not work on the other computer either, the monitor itself is faulty.
Alternatively, if you have access to another monitor, connect it to your computer using the same cable. If the other monitor works, your original monitor is faulty. If the other monitor also shows nothing, the problem is your computer's graphics card or motherboard port, not the monitor. This test takes 5 minutes and tells you exactly where the problem is.
When to replace the monitor instead of fixing it
A monitor is worth replacing rather than repairing if it has physical damage (cracked screen, liquid inside), shows a picture only in one corner or section, has dead pixels that form a pattern across the screen, or makes a loud buzzing sound. These are signs of internal component failure. Most repair shops charge $100 to $300 just to diagnose a monitor, and replacement monitors often cost less than that.
If the monitor is more than 5 years old, replacement is usually cheaper than repair. Older monitors are harder to find parts for, and the labor cost can exceed the monitor's current value. If you have gone through all the steps above and the monitor still shows nothing on multiple computers, it is time to replace it.
Frequently Asked Questions
What does "no signal" or "no input" mean?
It means the monitor is on and working, but it is not receiving a video signal from the computer. Check that the video cable is plugged in at both ends, that the correct port is selected in the monitor's menu, and that your computer is actually powered on. Restart both devices.
Why is my monitor picture blurry or pixelated?
Blurriness usually means the resolution is set too low. Go to Display settings and select the highest resolution available. If that does not help, update your graphics driver. Pixelation can also mean the cable is loose or damaged — try reseating it or swapping in a different cable.
Can I fix a monitor with a cracked screen?
No. A cracked screen cannot be repaired — the entire display panel must be replaced, which usually costs as much as a new monitor. If the screen is cracked, replacement is the only option.
Why does my monitor flicker on and off?
Flickering usually means a loose cable, an outdated driver, or a refresh rate mismatch. Reseat the video cable, update your graphics driver, and check that your refresh rate is set to 60 Hz or higher in Display settings. If flickering continues, try a different cable.
Is it safe to open a monitor to fix it myself?
No. Monitors contain capacitors that hold an electrical charge even when unplugged, and touching them can cause serious injury or death. Do not open a monitor yourself. If internal repair is needed, take it to a professional or replace it.