Connect the antenna cable to the TV's antenna input

Most televisions have an antenna input labeled ANT IN, ANTENNA, or RF IN on the back panel. This is a round connector about the size of a pencil eraser. Unscrew the connector cap if one is present, then screw the antenna cable onto this port by hand — you should not need tools. Turn it clockwise until it is snug, but do not force it.

If your TV has two antenna inputs (one labeled ANT IN and another labeled ANT OUT), use the one marked ANT IN. The ANT OUT port is for sending the signal to another device, not receiving it.

Older televisions sometimes use a different connector called a 300-ohm twin-lead — two flat wires side by side instead of a single round cable. If your TV has this connector, you will need a 300-ohm to 75-ohm adapter, available at electronics retailers for under $10. Screw the adapter onto the twin-lead terminals, then connect your antenna cable to the adapter.

Key Takeaways

  • The antenna cable screws onto the round ANT IN port on the back of your TV; do not force it or use tools.
  • If your TV has a 300-ohm twin-lead connector instead of a round port, you will need a cheap adapter to connect a modern antenna cable.
  • After connecting the cable, run a channel scan from your TV's settings menu to find available stations in your area.
  • If you receive few or no channels, try repositioning the antenna near a window or higher up in your home.

Run a channel scan after connecting the antenna

Once the antenna cable is connected, your TV will not automatically find channels. You must tell it to search for them. Open your TV's settings menu — usually by pressing the Menu or Settings button on the remote — and look for an option called Channel Scan, Auto Tune, Rescan Channels, or Search for Channels. The exact name varies by manufacturer.

Select this option and let the scan run. It will take a few minutes. Your TV will display a progress bar and then show you how many channels it found. Do not unplug the antenna or turn off the TV during this process.

If your TV finds zero channels, the antenna may not be positioned correctly, or your location may not receive strong signals. Before you move the antenna, try the scan again — sometimes a second attempt finds channels the first one missed.

Position the antenna for the strongest signal

Antenna placement matters more than most people expect. Start by placing the antenna near a window on the side of your home facing the broadcast towers in your area. You can find the direction of local towers using a website like TVFool.com or AntennaWeb.org — enter your address and the site will show you which direction to point the antenna and how far away the towers are.

If your antenna is indoors, higher placement usually works better than lower. Try mounting it on a shelf, on top of the TV, or on a wall rather than on the floor. If you still receive few channels, try moving the antenna to different rooms or different windows and run another channel scan each time.

Outdoor antennas receive stronger signals than indoor ones, but they require mounting hardware and a weatherproof cable connection. If you are receiving very few channels with an indoor antenna, an outdoor antenna may be necessary — this is a larger investment, but it is the most reliable way to receive distant stations.

Understand what the antenna cable carries

The antenna cable carries a radio signal from the antenna to your TV's tuner. This signal is separate from internet, streaming, or cable TV signals. Even if your TV is connected to the internet or a cable box, the antenna signal arrives through its own dedicated port and does not interfere with those connections.

The cable itself is called coaxial cable or coax. It has a single copper wire in the center surrounded by shielding that blocks interference from other electronics. If the cable is damaged, kinked, or has a loose connection, you will lose channels or see pixelated pictures. If you suspect a bad cable, replacing it costs $5 to $15.

Connect multiple TVs to one antenna

If you want to use the same antenna on more than one TV, you have two options. The first is to use a coaxial splitter — a small device with one input and two or more outputs. Screw the antenna cable into the splitter's input, then screw separate cables into each output and connect them to different TVs. Splitters cost $5 to $20 depending on how many outputs you need.

The downside of a splitter is that it weakens the signal slightly, so each TV receives a weaker signal than it would if connected directly. If you are already receiving few channels, a splitter may make the problem worse.

The second option is to run separate antenna cables from the antenna to each TV. This requires more cable and more connection points, but each TV gets the full signal strength. This approach works best if the antenna is centrally located and you have straightforward access to run cables through walls or along baseboards.

Troubleshoot missing or pixelated channels

If you are missing channels that should be available in your area, or if channels are pixelated or freezing, the antenna position is usually the cause. Try moving it a few feet in any direction and run another channel scan. Sometimes a shift of just one or two feet makes a large difference.

Check that the antenna cable is screwed on tightly at both ends — one end at the TV and one end at the antenna. A loose connection causes signal loss. If the cable is old or visibly damaged, replace it.

If you are receiving some channels clearly but others are weak, your antenna may be optimized for one direction but not another. Some antennas can be rotated to point in different directions. Try rotating it slowly while watching a weak channel, and stop when the picture improves.

Frequently Asked Questions

Do I need a special antenna cable or will any cable work?

Any coaxial cable rated for TV use will work, but quality varies. Cheap cables can pick up interference. A mid-range cable from an electronics retailer is fine for most indoor antennas. If you are using an outdoor antenna or running cable more than 50 feet, a higher-quality cable reduces signal loss.

Can I use an antenna and a cable box on the same TV?

Yes. Connect the antenna to the ANT IN port and the cable box to an HDMI port or composite video input. Use your TV remote to switch between the antenna input and the cable box input. You can watch cable channels or antenna channels, but not both at the same time on one TV.

What if my TV does not have an antenna port?

Some newer smart TVs and all streaming-only devices do not have antenna inputs. If your TV has no ANT IN port, you will need a separate digital TV tuner box that connects to your TV via HDMI. These boxes cost $30 to $80 and work with any TV that has an HDMI input.

Will an antenna work if my TV is in a basement or far from windows?

Indoor antennas work best near windows and higher up in a home. A basement location will receive fewer channels, especially distant ones. If you need reliable reception in a basement, an outdoor antenna is the better choice, even though it costs more and requires installation.