The fastest way: use the USB-C port on the bottom of the device

The ROG Ally has a single USB-C port on its bottom edge. This port handles both charging and video output at the same time. To connect to a monitor, you need a USB-C to HDMI cable or a USB-C docking station with HDMI ports — both are inexpensive and widely available.

The USB-C port supports DisplayPort Alt Mode, which means it can send video signals directly to an external display without any special software or drivers. Plug the cable or dock into the port, connect your monitor's HDMI cable to the other end, and the display should appear within a few seconds. No setup required.

If you use a docking station, you also get the benefit of charging the device while it is connected — the Ally's battery drains quickly under load, so this matters if you plan to play games on the external monitor for more than an hour or two.

Key Takeaways

  • The ROG Ally connects to monitors through its USB-C port using a USB-C to HDMI cable or docking station.
  • The USB-C port supports DisplayPort Alt Mode, so video output works when ready without drivers or settings changes.
  • A docking station lets you charge the device while using an external monitor, which extends play time significantly.
  • Once connected, you may need to adjust the display scaling in Windows settings if text or game menus appear too small or too large.

Choosing between a cable and a docking station

A straightforward USB-C to HDMI cable costs $10 to $25 and takes up almost no space. It works well if you are moving the Ally between locations or want a minimal setup. The downside is that you are not charging while playing, so the battery depletes during your session.

A docking station costs $30 to $80 depending on the brand and number of ports. It sits on your desk and provides HDMI output, USB ports for peripherals, and a power input so the Ally charges while connected. If you plan to use the Ally as a desktop replacement for several hours at a time, a docking station is worth the extra cost. Look for one that explicitly supports USB-C video output — not all USB-C docks do.

Some popular options include the Anker 7-in-1 USB-C Hub, the Lenovo ThinkPad USB-C Dock Gen 2, and the official ASUS ROG Ally Dock if you want may provide compatibility. Any dock that supports DisplayPort Alt Mode will work, even if it is not branded for the Ally.

What to do if the monitor stays blank after connecting

If you plug in the cable or dock and the monitor shows no signal, try these steps in order. First, unplug the USB-C cable, wait five seconds, and plug it back in. Sometimes the connection needs to be re-established.

Second, check that your monitor is set to the correct input. Use the monitor's physical buttons or remote to cycle through HDMI 1, HDMI 2, and any other inputs until you see the Ally's desktop. Many monitors default to the wrong input when a new device connects.

Third, restart the Ally. Hold the power button for ten seconds until it shuts down, then press the power button again to turn it back on. Once it boots, reconnect the USB-C cable.

If the monitor still shows no signal, the cable or dock may be faulty. Try a different USB-C cable if you have one, or test the dock with another USB-C device to confirm it works. If neither works, the port on the Ally itself may be damaged — contact ASUS support with your proof of purchase.

Adjusting display scaling and resolution

Once the monitor is connected and showing the desktop, you may notice that text, icons, or game menus look too small or too large. This happens because the Ally's built-in screen is much smaller than most external monitors, and Windows does not always guess the right scaling automatically.

To fix this, right-click on the desktop and select Display settings. Scroll down to the Scale section. Windows will show a percentage — usually 100%, 125%, or 150%. Try increasing or decreasing it by 25% increments until text looks readable. For most 1080p monitors paired with the Ally, 100% to 125% works well.

If you are playing a game and the image looks stretched or the menus are unreadable, check the game's own graphics settings. Some games let you set the resolution and UI scaling independently. Setting the game to your monitor's native resolution (usually 1920 × 1080 or higher) and then adjusting the UI scale in the game menu often looks better than relying on Windows scaling.

Using the Ally's built-in screen and an external monitor at the same time

When you connect an external monitor, the Ally does not automatically turn off its built-in screen. Both displays stay active, and you can move windows between them. This is useful if you want to play a game on the big monitor while keeping Discord or a web browser on the Ally's screen.

To manage this, open Display settings again. You will see both displays listed — the Ally's internal screen and your external monitor. You can choose which one is the main display (where new windows open by default) and adjust the arrangement so Windows knows which monitor is to the left or right of the other.

If you want to use only the external monitor and turn off the Ally's screen to save battery, right-click the internal display in Display settings and select Disable this display. The Ally will still be running, but all output goes to the external monitor only.

Performance and frame rate on an external monitor

The ROG Ally can drive most 1080p and 1440p monitors without trouble. If you connect a 4K monitor, the Ally can output 4K video, but gaming at 4K resolution will be slow — the Ally's GPU is designed for handheld gaming, not desktop performance. Most games will need to run at 1080p or 1440p even if the monitor is 4K.

The USB-C port supports up to 40 Gbps of bandwidth (USB 3.2 Gen 3x2), which is more than enough for any single monitor. You cannot daisy-chain multiple monitors through the USB-C port, but you can use a docking station with multiple HDMI outputs if you need two external displays.

Frame rate depends on the game and your graphics settings, not on the monitor connection itself. A 60 Hz monitor will show up to 60 frames per second; a 144 Hz monitor can show up to 144. The Ally's GPU will determine whether it can actually reach those frame rates in your specific game.

Frequently Asked Questions

Can I use a USB-C to DisplayPort cable instead of HDMI?

Yes. DisplayPort cables work the same way as HDMI cables with the Ally's USB-C port. Choose whichever one matches your monitor's input. If your monitor has both HDMI and DisplayPort, either will work equally well.

Do I need to install drivers for the external monitor?

No. Windows and the Ally handle the connection automatically. The monitor will work as soon as you plug it in. If the display looks wrong or colors seem off, check the monitor's own settings — some monitors have color profiles or brightness controls that need adjustment.

What happens to the Ally's battery when it is connected to a monitor?

The battery drains during gameplay, even if you are using an external monitor. If you use a docking station with power input, the Ally charges while connected. With a straightforward USB-C cable and no power supply, the battery will deplete over time.

Can I connect the Ally to a TV instead of a monitor?

Yes. Any TV with HDMI input works the same way as a monitor. Use the same USB-C to HDMI cable or docking station. Older TVs may take a few seconds longer to recognize the signal, but the connection is identical.

What if my monitor only has DisplayPort and no HDMI?

Use a USB-C to DisplayPort cable instead. The Ally's USB-C port supports both HDMI and DisplayPort output, so either cable type will work. DisplayPort cables are slightly less common but widely available online.