What cables and ports you actually need
Your PC and monitor connect through a single cable that carries both the image and sometimes power. The cable type depends on what ports both your PC and monitor have — and they do not always match. Before you buy anything, look at the back of your PC tower or laptop and the back of your monitor to see which ports are there. Write down what you see, because the names matter.
The most common ports on newer PCs are HDMI (a flat rectangular port, often found on laptops and newer desktops), DisplayPort (a smaller rectangular port with a notch, common on gaming PCs and newer monitors), and USB-C (a small oval port that can carry video on some laptops and monitors). Older PCs may have VGA (a port with three rows of small holes) or DVI (a port with two rows of pins). Monitors usually have at least two of these options so you have a choice.
If your PC and monitor share a port type — for example, both have HDMI — you need a cable that matches that type. If they do not match, you need an adapter that converts one type to the other. A cable and an adapter are not the same thing: a cable connects two matching ports directly, while an adapter lets you plug a cable into a port it was not designed for.
Key Takeaways
- Check the ports on the back of your PC and monitor before you buy a cable, because the type of port determines what cable you need.
- HDMI and DisplayPort are the most common on modern equipment; older PCs may have VGA or DVI ports instead.
- If your PC and monitor have the same port type, buy a cable that matches; if they do not match, buy an adapter for the PC side.
- After you plug in the cable, your monitor may not show an image until you tell it which input to use through its physical buttons or menu.
- If you see no image after connecting the cable, restart your PC with the monitor already plugged in and turned on.
Finding the right cable or adapter
Once you know which ports you have, you can find the right cable. If both your PC and monitor have HDMI ports, buy an HDMI cable — any HDMI cable will work, and you do not need to pay extra for a "premium" version. The same is true for DisplayPort and USB-C cables. These are sold at any electronics store, online retailers, and often at grocery stores near the phone section.
If your ports do not match, buy an adapter for the PC side, not the monitor side. For example, if your PC has DisplayPort and your monitor has only HDMI, buy a DisplayPort-to-HDMI adapter. Plug the adapter into the PC's DisplayPort, then plug an HDMI cable into the adapter, then plug the other end of the cable into the monitor. Do not buy an adapter that goes the other direction — it will not work.
If you are using a laptop, check whether it has USB-C. Many newer laptops can output video through USB-C, which means you may be able to use a single USB-C cable that also charges the laptop at the same time. Look for a monitor or cable labeled "USB-C with video" or "USB-C with DP Alt Mode" to make sure it supports video output, not just charging.
Plugging in the cable and powering on
Turn off both your PC and monitor before you plug anything in. This is not strictly necessary on modern equipment, but it removes any chance of a power surge damaging something. Plug the cable into the PC first, then into the monitor. If you are using an adapter, plug the adapter into the PC, then the cable into the adapter, then the other end of the cable into the monitor.
Turn on the monitor first, then turn on the PC. Wait for the PC to finish starting up — this usually takes one to three minutes. If you see a black screen or "no signal" message on the monitor, do not panic. This is the most common problem and it usually has a straightforward fix.
Telling the monitor which input to use
Even when the cable is plugged in correctly, the monitor may not show your PC's image right away. Monitors have multiple input ports because they can connect to different devices, and they need to be told which input to display. Look for a button on the monitor labeled "Input", "Source", or "Menu". Press it and look for a list of options like "HDMI 1", "HDMI 2", "DisplayPort", or "USB-C". Select the input that matches the cable you plugged in.
If you do not see a button on the front of the monitor, check the sides and back. Some monitors have buttons on the side or a small joystick that you push left, right, up, or down to navigate a menu. If you still cannot find the button, look up your monitor's model number (usually printed on the back or bottom) and search for "[model number] how to change input" online. The manual will show you exactly where the button is.
What to do if you still see no image
If you have selected the correct input and still see a black screen, restart your PC with the monitor already plugged in and turned on. Many PCs do not detect a monitor until after they have started up, so restarting forces the PC to look for the monitor again. This fixes the problem in most cases.
If restarting does not work, try a different cable or adapter if you have one available. A faulty cable is the second most common cause of "no signal" problems. If you do not have a spare cable, borrow one from a friend or buy a cheap HDMI cable to test with — they are inexpensive and useful to have around.
If a different cable works, your original cable is damaged and should be replaced. If a different cable does not work, the problem is likely with a port on your PC or monitor. Check whether the port has any bent pins (on VGA or DVI ports) or visible damage. If you see damage, that port may not work, but your monitor or PC likely has another port you can use instead.
Adjusting the image once it appears
Once you see your PC's desktop on the monitor, you may need to adjust the image to look right. If the image is too small or too large, or if it does not fill the whole screen, this is usually a scaling or resolution problem, not a cable problem.
On Windows, right-click on the desktop and select "Display settings". Look for "Scale and layout" and try changing the percentage — start with 100% if the text looks too small, or 125% if it looks too large. If the image does not fill the whole screen, look for "Resolution" and select the highest number available. This is usually the monitor's native resolution and will make the image look sharpest.
On Mac, click the Apple menu, select "System Settings", then "Displays". Look for "Resolution" and select "Scaled", then choose the option that looks best to you. Mac usually handles scaling automatically, so you may not need to change anything.
Using multiple monitors or a laptop with an external monitor
If you want to connect a second monitor to your PC, or if you are using a laptop with an external monitor, the process is the same: plug in the cable, tell the monitor which input to use, and restart if needed. Your PC will detect the new monitor automatically.
Once both monitors are connected, you can choose how they work together. On Windows, right-click the desktop and select "Display settings". Scroll down to "Multiple displays" and choose "Extend these displays" to use both monitors as one large workspace, or "Duplicate these displays" to show the same image on both. On Mac, click the Apple menu, select "System Settings", then "Displays", and look for "Arrangement" to choose how the monitors work together.
If you are using a laptop with an external monitor, you can close the laptop and use only the external monitor. Plug in a separate keyboard and mouse, then close the laptop lid. The external monitor will stay on and you can keep working. Some laptops go to sleep when you close the lid, so check your power settings if this happens — look for "When I close the lid" and change it to "Do nothing".
Frequently Asked Questions
Do I need a special cable for a new monitor?
No. Any HDMI, DisplayPort, or USB-C cable will work with any monitor that has the same port type. You do not need to buy the cable that came with the monitor or a "premium" version. A basic cable from any store works just as well.
Can I use an HDMI cable on a monitor that has DisplayPort?
Not directly. You would need a DisplayPort-to-HDMI adapter on the PC side. However, if your monitor has both HDMI and DisplayPort ports, it is easier to just use the HDMI port on both devices and skip the adapter.
Why does my monitor say "no signal" even though the cable is plugged in?
The most common reason is that you have not told the monitor which input to use. Press the "Input" or "Source" button on the monitor and select the port that matches your cable. If that does not work, restart your PC with the monitor already on. If you still see no signal, try a different cable to rule out a faulty connection.
Can I connect my laptop to a monitor wirelessly?
Some laptops and monitors support wireless connection through technologies like Miracast or AirPlay, but a wired cable connection is more reliable and does not have lag. If your laptop and monitor both support wireless, you can try it, but if you have problems with the image cutting out or lagging, switch to a wired cable.
What if my monitor has no ports that match my PC?
Buy an adapter for the PC side that converts your PC's port to one the monitor has. For example, if your PC has USB-C and your monitor has only HDMI, buy a USB-C-to-HDMI adapter. Make sure the adapter supports video output, not just charging or data transfer.