The fastest way: use AirPlay with a compatible device

You cannot connect an iPhone directly to a Samsung TV using AirPlay alone, because Samsung TVs do not natively support Apple's AirPlay protocol. However, you have two working paths: buy a device that bridges the gap, or use a cable connection. The bridge approach is faster to set up and works wirelessly; the cable approach works when ready but tethers your phone.

If you want wireless casting without buying anything new, check whether your Samsung TV has SmartThings built in (most models from 2016 onward do). SmartThings is Samsung's own casting system, and some iPhones can push video to it through third-party apps — but this route is slower and less reliable than the other options.

Key Takeaways

  • An Apple TV, AirPlay-compatible streaming device, or HDMI adapter are the three ways to get an iPhone signal onto a Samsung TV.
  • Apple TV 4K or a second-generation Apple TV HD will mirror your iPhone wirelessly and work with any Samsung TV that has an HDMI port.
  • A USB-C to HDMI adapter (for newer iPhones) or Lightning to HDMI adapter (for older models) connects directly to your TV and requires no setup, but your phone stays plugged in.
  • Third-party apps that claim to cast to Samsung TVs directly often work poorly and drain your battery quickly.

Using an Apple TV device (wireless, no cable)

An Apple TV is the most reliable way to get your iPhone onto a Samsung TV wirelessly. You connect the Apple TV to your Samsung TV using an HDMI cable, connect both devices to the same Wi-Fi network, and then use AirPlay from your iPhone to send video, audio, or your entire screen to the TV.

To set this up: plug the Apple TV into power and into an HDMI port on your Samsung TV. Go through the Apple TV setup process on your TV screen (you will need an Apple ID). Once the Apple TV is on the same Wi-Fi as your iPhone, open Control Center on your iPhone (swipe down from the top right on newer models, or up from the bottom on older ones), tap Screen Mirroring, and select your Apple TV from the list. Your iPhone screen will appear on the TV within a few seconds.

Apple TV 4K and Apple TV HD both work this way. Older Apple TV models (third generation and earlier) do not support AirPlay from iPhone, so check the model number before buying used. The current Apple TV 4K costs around $129; the older Apple TV HD is sometimes available refurbished for less, but Apple has discontinued it.

Using a wired HDMI adapter (when ready, no setup)

A USB-C to HDMI adapter or Lightning to HDMI adapter plugs directly into your iPhone and connects to your Samsung TV with an HDMI cable. Your phone's screen appears on the TV when ready — no pairing, no apps, no Wi-Fi needed. The trade-off is that your iPhone stays plugged in while you use it.

Which adapter you need depends on your iPhone model. iPhones 15 and newer use USB-C; iPhones 14 and older use Lightning. You can find both types on Amazon or at electronics retailers for $20 to $40. Plug the adapter into your iPhone, connect an HDMI cable from the adapter to your Samsung TV, and switch the TV to the correct HDMI input. The image appears when ready.

This method works with any Samsung TV that has an HDMI port, regardless of age or model. It also works if your Wi-Fi is down or slow. The main limitation is that your phone is tethered to the TV while in use, and the cable can feel awkward if you want to move around the room.

Using a third-party AirPlay adapter

Devices like Roku, Amazon Fire TV, or Google Chromecast can receive AirPlay from an iPhone if they support it. Roku and some Fire TV models have built-in AirPlay support; Google Chromecast does not. If you already own one of these devices, you can plug it into your Samsung TV's HDMI port and use it as an AirPlay receiver.

To use this method: plug the device into an HDMI port on your TV, connect it to Wi-Fi, and make sure your iPhone is on the same Wi-Fi network. Open Control Center on your iPhone, tap Screen Mirroring, and select the device from the list. The setup is identical to using an Apple TV, and the cost is often lower — a Roku Express costs around $30, while a Fire TV Stick costs around $40.

The downside is that these devices are not optimized for iPhone the way Apple TV is. You may see occasional lag, audio sync issues, or the connection may drop and need to be re-established. If you are casting video or photos, this usually works fine. If you are playing games or using apps that require fast response, the delay can be noticeable.

Why SmartThings casting is not recommended

Samsung's SmartThings app exists on both iOS and Android, and you might think you could use it to cast directly to your Samsung TV. In theory, you can — the SmartThings app on iPhone can send video to a SmartThings-enabled Samsung TV. In practice, this route is slow, unreliable, and drains your iPhone battery quickly.

The SmartThings casting feature was designed primarily for Android phones, where it works better. On iPhone, the connection often drops, the video lags behind the audio, and the app may crash if you try to cast for more than a few minutes. If you own a Samsung TV with SmartThings, use one of the other methods instead — they will give you a much better experience.

Comparing your options at a glance

MethodCostSetup TimeWirelessReliability
Apple TV 4K~$12910–15 minutesYesExcellent
USB-C or Lightning to HDMI adapter$20–$401 minuteNoExcellent
Roku or Fire TV$30–$505–10 minutesYesGood
SmartThings app$02–3 minutesYesPoor

What to do if nothing works

If you have tried one of these methods and the connection is not working, start by checking that both your iPhone and the receiving device (Apple TV, adapter, or streaming device) are on the same Wi-Fi network. Many connection failures happen because the devices are on different networks — your phone might be on the 5 GHz band while the TV device is on 2.4 GHz, for example.

If you are using a wireless method, restart both your iPhone and the TV device. Turn off the TV device completely, wait 30 seconds, and turn it back on. Then restart your iPhone by powering it off and on again. Try the connection once more. If it still does not work, check the manufacturer's support page for your specific device — Apple TV, Roku, Fire TV, and others all have troubleshooting guides that cover common issues like outdated software or incompatible iOS versions.

For wired adapters, make sure the HDMI cable is fully inserted into both the adapter and the TV, and that you have selected the correct HDMI input on your TV remote. Some TVs default to the wrong input when you plug something in.

Frequently Asked Questions

Can I use AirPlay directly on my Samsung TV without any extra device?

No. Samsung TVs do not have built-in AirPlay support. You need either an Apple TV, a compatible streaming device like Roku, or a wired HDMI adapter to bridge the gap between your iPhone and the TV.

Will a USB-C to HDMI adapter work with older iPhones?

No. iPhones 15 and newer use USB-C; older models use Lightning. You need a Lightning to HDMI adapter for iPhones 14 and earlier. Check your iPhone model before buying an adapter.

Is there a way to cast without buying anything?

The SmartThings app is free and works on some Samsung TVs, but it is unreliable on iPhone and often drops the connection. If you have an Apple TV, Roku, or Fire TV already, you can use those instead. Otherwise, a wired adapter is the cheapest reliable option.

Can I charge my iPhone while using a wired HDMI adapter?

Not with a standard adapter. Some third-party adapters claim to support charging, but they are uncommon and often unreliable. If you need to charge while casting, use a wireless method like Apple TV or Roku instead.

Why does my AirPlay connection keep dropping?

Dropped connections usually mean your iPhone and the receiving device are not on the same Wi-Fi network, or your Wi-Fi signal is weak. Move closer to your router, restart both devices, and check that they are both connected to the same network band (5 GHz or 2.4 GHz). If you are using a third-party device like Roku, outdated firmware can also cause drops — check the device's settings for software updates.