The simplest way to connect your computer to a TV

You can connect a computer to a TV using a cable that matches the ports on both devices. The most common connection today is HDMI, which carries both picture and sound in one cable. If your computer and TV both have HDMI ports — small rectangular slots — you plug one end into each device, and the TV should display your computer's screen within seconds.

If your computer or TV is older, you may need a different cable type. Older computers often use VGA (a port with three rows of small holes) or DisplayPort (a small rectangular slot). Older TVs sometimes have only composite video (three colored ports: red, white, and yellow). The cable you need depends on what ports your specific devices have, not on how new they are.

Once the cable is connected, the TV may not show your computer screen automatically. You may need to switch the TV to the correct input using its remote control, or tell your computer to send the picture to the TV through its display settings. Both steps are straightforward once you know where to look.

Key Takeaways

  • HDMI is the standard connection for most computers and TVs made in the last ten years, and it carries both picture and sound through one cable.
  • If your devices have different port types, you can buy an adapter cable at any electronics store for ten to thirty dollars.
  • After plugging in the cable, switch the TV to the correct input using its remote, usually labeled HDMI 1, HDMI 2, or Input.
  • On Windows, right-click the desktop and select Display Settings; on Mac, go to System Settings and choose Displays to tell your computer to use the TV.
  • If the TV shows a picture but it looks stretched or cut off, adjust the display scaling in your computer's settings or the TV's picture settings.

Identifying the ports on your computer and TV

Look at the back or sides of both your computer and TV to find the video ports. On most computers made after 2012, you will see at least one HDMI port — a small rectangular slot about the size of a USB port but flatter. Laptops often have HDMI on the side. Desktop computers usually have HDMI on the back, either on the main case or on a separate graphics card.

TVs almost always have HDMI ports on the back or side, usually labeled HDMI 1, HDMI 2, and so on. If your TV is from before 2010, it may have only older ports like VGA (a port with three rows of small holes and a blue connector) or composite video (three colored round ports). Write down which ports you see on each device — this tells you what cable you need.

If you are unsure what port you are looking at, check your device's manual or search the model number online. The manual will show you a diagram of the back panel with every port labeled. You can usually find the manual as a PDF on the manufacturer's website by typing the model number into a search engine.

Choosing and buying the right cable

If both your computer and TV have HDMI ports, buy an HDMI cable. These are inexpensive — usually five to fifteen dollars for a standard cable — and work with any HDMI port. You do not need an expensive "premium" HDMI cable; a basic one works just as well for connecting a computer to a TV.

If your computer has a different port type, you have two options: buy a cable that matches both ports, or buy an adapter. For example, if your computer has DisplayPort and your TV has HDMI, you can buy a DisplayPort-to-HDMI cable, or you can buy a DisplayPort-to-HDMI adapter and use it with a regular HDMI cable. Adapters are usually cheaper and give you more flexibility if you later want to connect different devices.

Buy cables and adapters from any electronics store, online retailer, or even a grocery store with an electronics section. Do not buy from the TV or computer manufacturer directly — the same cable costs much more from them. Check the return policy before you buy in case the cable does not work with your specific devices.

Connecting the cable and switching the TV input

Shut down your computer completely before plugging in the cable. This is not strictly necessary for HDMI, but it prevents any rare conflicts and is good practice. Once the computer is off, plug one end of the cable into the port on your computer and the other end into the port on your TV.

Turn on the TV first, then turn on your computer. Pick up the TV remote and look for a button labeled Input, Source, or HDMI. Press it to see a menu of available inputs. Select the input that matches the port you plugged the cable into — for example, if you used HDMI 2, select HDMI 2 from the menu. The TV should now show your computer's desktop.

If the TV does not show anything, try a different input from the menu. If you still see nothing after trying all inputs, unplug the cable, wait ten seconds, and plug it back in. Then turn off the TV and computer, wait a few seconds, and turn them back on in the same order: TV first, then computer.

Telling your computer to use the TV as a display

On Windows, right-click on an empty area of your desktop and select Display Settings from the menu. You should see a list of connected displays. If the TV appears in the list, click on it and then click Make this my main display if you want the TV to be your primary screen. If the TV does not appear, scroll down and click Detect to force Windows to search for it.

On Mac, click the Apple menu in the top-left corner and select System Settings. Click Displays in the left sidebar. If your TV is connected, it should appear in the list. Click on it to select it as your display. If it does not appear, click the plus button at the bottom to add a new display.

Once you have selected the TV as your display, your computer will send its picture to the TV. You can now use the TV as you would use a monitor — open programs, browse the web, or watch videos on the larger screen. If you want to use both the TV and your computer's built-in screen at the same time, look for an option called Extend Display or Duplicate Display in your display settings.

Fixing picture problems like stretching or cut-off edges

If the picture on the TV looks stretched, squashed, or has black bars on the sides, the display scaling is wrong. On Windows, go back to Display Settings, click on the TV display, and look for a setting called Scale. Try different percentages — usually 100%, 125%, or 150% — until the picture looks right. If the text is too small to read, increase the scale.

If part of the picture is cut off at the edges, the problem is usually the TV itself, not your computer. Pick up the TV remote and look for a menu option called Picture, Display, or Overscan. Look for a setting that controls the size or position of the image and adjust it until the edges of your desktop are visible. Different TV brands use different names for this setting, so you may need to check your TV's manual.

If the picture looks blurry or the text is hard to read, your computer may be sending a resolution the TV cannot display clearly. Go back to Display Settings on Windows or System Settings on Mac, find the Resolution setting, and try a lower resolution like 1920 by 1080. Higher resolutions look sharper on computer monitors but can look blurry on TVs, especially older ones.

Using the TV as a second display instead of your main screen

If you want to keep using your computer's built-in screen or monitor and use the TV as an extra display for videos or a second window, you can extend your display instead of replacing it. On Windows, go to Display Settings, click on the TV, and select Extend Display. On Mac, go to System Settings, click Displays, and look for an option to arrange displays side by side.

When you extend the display, your desktop stretches across both screens. You can drag windows from your computer screen to the TV screen, or move your mouse to the edge of one screen and it will appear on the other. This is useful if you want to watch a video on the TV while working on your computer, or if you want to present something on the TV while keeping your notes on your computer screen.

To switch back to using only your computer's screen, go to Display Settings or System Settings again and select Use as main display only, or disconnect the cable from the TV. Your computer will remember your display settings, so the next time you connect the TV, it will use the same setup you chose before.

Connecting without a cable using wireless options

If you do not want to use a cable, you can connect wirelessly using Miracast on Windows or AirPlay on Mac, but only if your TV supports these features. Check your TV's manual or settings menu to see if it has Miracast or AirPlay built in. Many newer TVs do, but not all.

On Windows with Miracast, go to Settings, click System, then Display, and look for Connect to a wireless display. Click it and select your TV from the list. On Mac with AirPlay, click the Control Center in the top-right corner, select Screen Mirroring, and choose your TV. The connection takes a few seconds and works the same way as a cable once it is set up.

Wireless connections are convenient but can be slower and less stable than a cable, especially if your computer and TV are far apart or if other devices are using your Wi-Fi network. If you plan to watch videos or do anything that requires a steady connection, a cable is more reliable. Wireless works well for occasional use or presentations.

Frequently Asked Questions

Do I need a special cable for 4K video?

Standard HDMI cables work with 4K video if both your computer and TV support it. If you want to be certain, look for a cable labeled HDMI 2.0 or higher, but most HDMI cables sold today support 4K. The cable itself does not determine whether you get 4K — your computer's graphics card and your TV's capabilities do.

Can I connect a laptop to a TV if the laptop only has USB-C?

Yes. Buy a USB-C-to-HDMI adapter or cable, which costs ten to twenty dollars. Plug it into your laptop's USB-C port and then plug an HDMI cable into the adapter. Some newer laptops have USB-C ports that support video output, but not all do, so check your laptop's manual first.

What if my TV has no HDMI port at all?

If your TV is very old and has only VGA or composite ports, you can buy an adapter from your computer's video output to that port type. These adapters are still sold online, though they are becoming harder to find. If your TV is that old, it may be worth considering a newer TV, as the picture quality will be much better.

Why does my computer screen go black when I connect the TV?

This usually means the TV is not set to the correct input. Pick up the TV remote, press Input or Source, and select the port you plugged the cable into. If that does not work, unplug the cable, wait ten seconds, and plug it back in. If the screen is still black, restart both devices with the cable already connected.

Can I use the TV remote to control my computer?

Not with a standard cable connection. The cable only carries picture and sound, not control signals. If you want to control your computer from the TV remote, you would need a separate wireless keyboard and mouse, or a device like a Roku or Apple TV that lets you control your computer through its interface.