Where to find screensaver settings on your computer
Your screensaver settings live in the same control panel where you adjust display brightness and sleep timing. On Windows, you reach them through Settings > System > Display > Screen saver settings. On a Mac, go to System Settings > Lock Screen, then look for the "Start after" dropdown — that controls when your screensaver turns on.
The reason screensavers exist is older than most people think. Decades ago, leaving a static image on screen for hours could burn that image permanently into the display. Modern monitors do not have this problem, so screensavers are now mostly about preference and security — some people like a blank screen, others want motion, and some want the screen locked so a passerby cannot see their work.
Before you change anything, decide what you actually want. A screensaver that activates after two minutes of inactivity will interrupt you constantly if you pause to read or think. A screensaver that never activates means your screen stays on all night if you forget to lock it manually. Most people find a middle ground — somewhere between five and thirty minutes — works best.
Key Takeaways
- Windows screensaver settings are in Settings > System > Display > Screen saver settings; Mac settings are in System Settings > Lock Screen.
- You can choose from built-in options like Blank, Starfield, or Ribbons, or select a folder of your own photos to cycle through.
- The "wait time" setting controls how many minutes of inactivity pass before the screensaver starts — five to thirty minutes is typical.
- Turning on "On resume, display logon screen" adds a security layer by requiring your password when you move the mouse again.
- If you want your screen to turn off completely instead of showing a screensaver, adjust your power settings rather than the screensaver menu.
Changing your screensaver on Windows
Open Settings and navigate to System > Display. Scroll down until you see "Screen saver settings" and click it. A small window will open with a dropdown menu at the top labeled "Screen saver." Click that dropdown to see what is available. Windows includes several built-in options: Blank (a black screen), Starfield (moving stars), Ribbons (colored flowing lines), and a few others depending on your Windows version.
If you want to use your own photos, select "Photos" from the dropdown. A button labeled "Browse" will appear below it — click that to choose a folder on your computer. Windows will cycle through every image in that folder when the screensaver activates. Set the "Wait" time in minutes — this is how long your computer sits unused before the screensaver turns on. Then check the box next to "On resume, display logon screen" if you want to require your password when you move the mouse again. Click "explore" and then "OK" to save.
Changing your screensaver on Mac
On a Mac, the screensaver is called a "screen saver" in System Settings. Open System Settings and click "Lock Screen" in the sidebar. Near the top, you will see a dropdown that says "Start after" with a number of minutes next to it. Click that dropdown to change how long the computer waits before the screensaver activates.
Just above the "Start after" setting, you will see a preview window showing your current screensaver. Click on that preview to open a list of available options. Mac includes built-in choices like Aerial (moving video of landscapes), Kaleidoscope (geometric patterns), and others. If you want to use your own photos, look for an option labeled "Photos" or "Memories" — click it and choose which album or folder to display. Once you select one, the preview updates when ready so you can see what it will look like.
Using your own photos as a screensaver
Both Windows and Mac let you point the screensaver to a folder of your own images. On Windows, choose "Photos" from the dropdown, click "Browse," and select any folder on your computer. On Mac, select "Photos" from the screensaver list and choose which album you want to cycle through.
The screensaver will display every image in that folder in order, holding each one for a few seconds before moving to the next. If you have hundreds of photos, the screensaver will take a long time to cycle through them all. If you want a tighter selection, create a new folder, copy just the images you want into it, and point the screensaver there instead. This also prevents the screensaver from showing photos you may not want displayed if someone else is in the room.
Setting the wait time and security options
The "wait time" or "start after" setting controls how many minutes pass without keyboard or mouse movement before the screensaver turns on. If you set it to two minutes, the screensaver will set up whenever you step away from your desk briefly — which many people find annoying. If you set it to sixty minutes, you may forget to lock your computer manually. Five to fifteen minutes is a reasonable range for most people.
On Windows, check the box labeled "On resume, display logon screen" if you want your password required when you wake the computer. This adds a layer of security: if you step away and the screensaver activates, someone cannot straightforward move your mouse and access your work. On Mac, this setting is called "Require password after screen saver begins" and is found in System Settings > Lock Screen as well. Both options are worth turning on if you work in a shared space or handle sensitive information.
Turning off the screensaver entirely
If you do not want a screensaver at all, you have two options. The first is to set the wait time to "Never" — on Windows, select "None" from the screensaver dropdown; on Mac, set "Start after" to "Never." This prevents any screensaver from activating, but your screen will stay on indefinitely if you leave it.
The second option is to adjust your power settings instead. On Windows, go to Settings > System > Power and battery, then click "Screen and sleep." Set "Screen turns off after" to however many minutes you want — five, ten, or thirty. When that time passes, your screen will turn off completely rather than showing a screensaver, which also saves power. On Mac, go to System Settings > Lock Screen and look for "Turn display off after" — set that to your preferred time. This approach is better for your monitor and your electricity bill.
Troubleshooting screensaver problems
If your screensaver is not activating even though you set it up, check whether your power settings are overriding it. On Windows, if "Screen turns off after" is set to a shorter time than your screensaver wait time, the screen will turn off before the screensaver ever appears. Adjust the power setting to be longer than the screensaver wait time, or turn off the power setting entirely. On Mac, the same logic applies — if "Turn display off after" is shorter than "Start after," the display will sleep before the screensaver shows.
If you selected a folder of photos and the screensaver is not showing them, the folder may be in a location your computer cannot access — for example, an external drive that is not currently plugged in, or a network folder that is offline. Try selecting a folder on your main hard drive instead. If the screensaver is showing only some of your photos, check whether some files in that folder are corrupted or in a format your computer does not recognize — try moving them to a different folder and see if the screensaver works better.
Frequently Asked Questions
Can I use a video file as my screensaver?
Windows and Mac screensavers are designed for still images and built-in animations, not video files. If you want video to play when your computer is idle, you would need third-party software. For most people, a folder of photos or a built-in option like Aerial on Mac is a simpler choice.
Does a screensaver save power?
No — a screensaver keeps your monitor on and running, so it uses the same power as any other display. If you want to save power, turn off your screen entirely using the "Turn display off after" or "Screen turns off after" setting instead. This uses far less electricity than a screensaver.
What if I want a different screensaver on my second monitor?
Windows and Mac explore the same screensaver to all connected monitors — you cannot set different screensavers for different displays. Both monitors will show the same screensaver when it activates.
How do I make my screensaver start faster?
Lower the "Wait" or "Start after" number. If it is currently set to thirty minutes, change it to five or ten. Keep in mind that a very short wait time will interrupt you frequently if you pause to read or think without moving your mouse.
Can I password-protect just the screensaver without locking my whole computer?
Yes — turn on "On resume, display logon screen" on Windows or "Require password after screen saver begins" on Mac. This requires a password only when you wake from the screensaver, not when you first lock your computer manually.