The basic connection process

An Apple keyboard connects to your iPad through Bluetooth, the same wireless technology that pairs headphones or mice. The keyboard and iPad find each other, exchange a security code, and then remember that pairing so you do not have to repeat the process every time. Most Apple keyboards pair in under a minute.

The iPad must have Bluetooth turned on, which it does by default. You turn on the keyboard (usually by pressing a power button or flipping a switch), put it in pairing mode, then tell the iPad to look for it. Once paired, the keyboard wakes up and connects automatically whenever you turn it on near the iPad.

Key Takeaways

  • Apple keyboards pair through Bluetooth settings on your iPad, not through a cable or app.
  • You must put the keyboard in pairing mode first — usually by holding a power button or pressing a dedicated pairing key — before the iPad can find it.
  • After the first pairing, the keyboard reconnects automatically when you turn it on, as long as Bluetooth remains on.
  • If pairing fails, restart both devices and try again; if the keyboard still will not pair, check that it has a charged battery.

Turning on the keyboard and entering pairing mode

Locate the power button on your Apple keyboard. On the Magic Keyboard and Magic Keyboard Folio, it is a thin switch on the back edge. On older wired Apple keyboards, there is no pairing step — they work as soon as you plug them in via USB.

Slide the power switch to the on position. You should see a light on the keyboard or hear a small sound. Now hold down the power button for three to five seconds until you see a flashing light on the keyboard. This flashing light means the keyboard is in pairing mode and searching for an iPad to connect to.

If your keyboard has a dedicated pairing button (some older models do), press and hold that instead. Check the underside or back of the keyboard for a small button labeled with a Bluetooth symbol or the word "Pair".

Finding and selecting the keyboard in iPad settings

On your iPad, open Settings. Tap Bluetooth in the left sidebar. Make sure the Bluetooth toggle at the top is turned on — it should be blue and switched to the right.

Wait a few seconds. Your Apple keyboard should appear in the list under "Other Devices" with a name like "Magic Keyboard" or "Apple Wireless Keyboard". Tap the keyboard name. The iPad will ask you to confirm the pairing by entering a code, or it may pair automatically without asking.

If a code appears on your iPad screen, type that code on the keyboard and press Enter. The keyboard will then move to the "My Devices" section at the top of the Bluetooth list, and you will see "Connected" next to its name.

What to do if the keyboard does not appear

If the keyboard does not show up in the Bluetooth list after 30 seconds, the keyboard may not be in pairing mode. Go back to the keyboard, hold the power button again for five seconds, and watch for the flashing light. Then return to the iPad Bluetooth settings and look again.

If the keyboard still does not appear, check the battery. Most Apple keyboards run on rechargeable batteries or AA batteries. A dead battery is the most common reason pairing fails. Charge the keyboard for at least 30 minutes, then try again.

If you have tried pairing before and the keyboard appears in the Bluetooth list but will not connect, tap the information icon (a small circle with an "i") next to the keyboard name and select "Forget This Device". Then repeat the pairing process from the beginning.

Using the keyboard after it is paired

Once paired, the keyboard connects automatically whenever you turn it on. You do not need to go back to Settings. straightforward press a key on the keyboard, and it will wake up and connect to the iPad within a few seconds.

If the keyboard does not respond after you press a key, check that Bluetooth is still on in Settings. If it is, turn the keyboard off and back on. If the keyboard still does not work, forget it from Bluetooth settings and pair it again.

The keyboard will stay paired even if you turn it off or move it away from the iPad. The next time you turn it on near the iPad, it will reconnect automatically. You can pair the same keyboard to multiple iPads, but it will only connect to one at a time.

Troubleshooting a keyboard that was previously paired

If you have used this keyboard with another iPad or device, it may try to connect to that device instead of your current iPad. Turn off Bluetooth on the other device, or forget the keyboard from that device's Bluetooth settings. Then turn the keyboard off and back on near your current iPad.

If the keyboard pairs but the keys do not type anything, restart the iPad. Press and hold the top button and either volume button until the power-off slider appears, then slide to turn off. Wait 10 seconds, then press the top button again to turn it back on.

If restarting does not work, the keyboard may need a software update. Check the Apple Support website for your specific keyboard model to see if an update is available. Updates for Apple keyboards are rare, but they do happen occasionally.

Disconnecting or unpairing the keyboard

To temporarily disconnect the keyboard without unpairing it, straightforward turn the keyboard off. It will not connect again until you turn it back on.

To permanently unpair the keyboard so it no longer connects automatically, open Settings, tap Bluetooth, find the keyboard in the list, tap the information icon next to it, and select "Forget This Device". The keyboard will no longer appear in your Bluetooth list, and you will need to pair it again if you want to use it with this iPad in the future.

Frequently Asked Questions

Can I use a non-Apple Bluetooth keyboard with my iPad instead?

Yes. Any Bluetooth keyboard pairs the same way — through Settings, Bluetooth, and the pairing mode on the keyboard. Apple keyboards work seamlessly with iPad, but third-party keyboards like Logitech or Microsoft models work just as well for typing.

Why does my keyboard keep disconnecting?

The most common cause is a low battery. Charge the keyboard fully and try again. If it still disconnects, forget the keyboard from Bluetooth settings, restart both devices, and pair them again. Interference from other wireless devices is rare but possible — try moving away from Wi-Fi routers or other Bluetooth devices.

Can I pair one keyboard to two iPads at the same time?

No. A keyboard connects to only one device at a time. You can pair it to multiple iPads, but it will only actively connect to one. To switch to a different iPad, turn the keyboard off, turn it back on near the other iPad, and it will reconnect there.

Do I need to do anything special if I have not used the keyboard in a long time?

Charge the keyboard first. If it still will not pair after charging, forget it from Bluetooth settings and pair it again from scratch. Old pairings sometimes become corrupted if a device has not been used for months.

What if my iPad does not have a Bluetooth toggle in Settings?

All iPads with Bluetooth support have this toggle. If you cannot find it, make sure you are in the main Settings app, not a different app. Swipe left from the left edge of the screen to see the Settings sidebar, then look for Bluetooth. If it is still not there, your iPad model may not support Bluetooth keyboards — check the Apple Support website for your specific iPad model.