The basic connection process depends on your keyboard model

Most Logitech wireless keyboards connect in one of two ways: through a small USB receiver (called a dongle) that plugs into your computer, or through Bluetooth if your keyboard and computer both support it. The receiver method is more common and works with almost any computer. Bluetooth is faster to set up if your device has it built in, but the receiver method is more reliable if you move between computers or have interference from other wireless devices.

Before you start, check what came in your keyboard box. You should see either a small USB receiver about the size of a thumb drive, or instructions telling you to use Bluetooth. If you have the receiver, you'll also need to install batteries in the keyboard itself — usually two AA or AAA batteries depending on the model.

Key Takeaways

  • Logitech wireless keyboards use either a USB receiver or Bluetooth; check your box to see which one yours has.
  • If your keyboard uses a receiver, insert batteries first, then plug the receiver into any USB port on your computer.
  • If your keyboard uses Bluetooth, turn on pairing mode by holding the power button or a dedicated pairing button for three seconds, then select it from your computer's Bluetooth settings.
  • Once connected, test a few keys to make sure the keyboard responds; if it does not, restart both the keyboard and your computer.
  • Keep the receiver in a drawer or bag if you are not using it; it does not need to stay plugged in when the keyboard is off.

Connecting with a USB receiver

Insert two AA or AAA batteries into the battery compartment on the back or bottom of your keyboard, making sure the positive and negative ends line up with the markings inside. Then flip the power switch on the keyboard to the On position — you should see a light on the keyboard or receiver blink once.

Plug the USB receiver into any available USB port on your computer. Windows and Mac computers recognize Logitech receivers automatically; you do not need to install software. Within a few seconds, the light on the receiver should stop blinking and stay solid, which means the keyboard is connected. Press a key to test — if a letter or number appears on your screen, the connection is working.

If the light keeps blinking after 30 seconds, the keyboard and receiver have not paired yet. Press the pairing button on the receiver (a small button you may need to press with a paperclip or pen) and hold it for three seconds until the light blinks faster. Then press any key on the keyboard. The light should go solid within a few seconds.

Connecting with Bluetooth

Insert batteries into your keyboard and turn it on. Look for a power button or a dedicated pairing button — on some Logitech models, the pairing button is labeled with a Bluetooth symbol. Hold whichever button your keyboard has for three to five seconds until you see the light blink rapidly or change color. This puts the keyboard into pairing mode and makes it visible to your computer.

On Windows, open Settings, go to Devices, then Bluetooth & other devices, and toggle Bluetooth on. Your keyboard should appear in the list of available devices within 10 seconds. Click on it to connect. On Mac, open System Preferences, go to Bluetooth, and look for your keyboard in the list. Click Connect.

Once your computer shows the keyboard as connected, the light on the keyboard should stop blinking. Press a few keys to confirm it is working. If your computer asks for a PIN code, check the bottom of your keyboard or the instruction sheet — Logitech keyboards usually do not require one, but some older models do.

What to do if the keyboard does not connect

If you plugged in the receiver or turned on Bluetooth but the keyboard still does not respond, start by checking the batteries. Remove them, wait 10 seconds, and reinsert them firmly. Make sure the positive and negative ends are lined up correctly — a battery installed backwards will not work.

If the batteries are fine, restart your computer. This clears any temporary connection problems and often fixes Bluetooth pairing issues. After your computer restarts, test the keyboard again. If you are using a USB receiver, you can also try plugging it into a different USB port — some ports on older computers do not work reliably with wireless devices.

For Bluetooth keyboards, forget the device and pair it again from scratch. On Windows, go to Settings > Devices > Bluetooth & other devices, find your keyboard in the list, click it, and select Remove device. Then repeat the pairing steps above. On Mac, open System Preferences > Bluetooth, select your keyboard, and click the X button to remove it, then pair again.

Moving your keyboard between computers

If you use a USB receiver, you can unplug it from one computer and plug it into another without any setup. The keyboard will connect automatically. This is one reason the receiver method is popular for people who work on multiple devices.

With Bluetooth, you will need to forget the keyboard from the first computer and pair it with the second one using the steps in the section above. This takes a minute or two but only needs to happen once per computer. After that, your keyboard will reconnect to each computer automatically when you turn it on.

Keeping your keyboard working over time

Check your battery level every few months. Most Logitech keyboards have a battery indicator light — if it turns red or orange, replace the batteries soon. Waiting until the keyboard stops responding entirely can cause connection problems that require re-pairing.

If you are not using your keyboard for more than a week, turn it off to save battery life. The power switch is usually on the back or bottom. You can leave the USB receiver plugged in; it uses almost no power when the keyboard is off.

Keep the receiver in a safe place if you remove it — a desk drawer or small bag works well. Do not lose it, because you will need it to reconnect the keyboard if you switch computers or if the pairing is lost.

Frequently Asked Questions

Do I need to install software to use a Logitech wireless keyboard?

No. Both Windows and Mac recognize Logitech USB receivers and Bluetooth keyboards without any software. If you want to customize keys or change settings, Logitech offers optional software called Logitech Options, but the keyboard works fine without it.

Can I use the same receiver with multiple keyboards?

One receiver can pair with only one keyboard at a time. If you have two Logitech keyboards, you need two receivers, or you can use Bluetooth on one keyboard and the receiver on the other.

What if my computer does not have Bluetooth?

Use the USB receiver instead — it works with any computer that has a USB port. If your computer is very old and does not have USB, a Logitech wireless keyboard will not work with it.

How far away can the keyboard be from the receiver or computer?

USB receivers typically work up to 10 meters (about 33 feet) away, though walls and metal objects can reduce that range. Bluetooth keyboards usually work up to 10 meters as well, depending on your computer's Bluetooth chip.

Can I use rechargeable batteries instead of disposable ones?

Yes. Rechargeable AA or AAA batteries work fine in Logitech keyboards. They may not last as long per charge as disposable batteries, so keep a second set charged and ready to swap in.