The basic connection process
A Logitech Bluetooth keyboard connects to your device in three steps: turn on the keyboard, put it in pairing mode, then select it from your device's Bluetooth settings. Most Logitech keyboards pair in under a minute and work when ready after. The exact steps vary slightly depending on whether you have a Mac, Windows PC, iPad, or Android device, but the keyboard itself behaves the same way.
Before you start, make sure your keyboard has batteries installed and your device has Bluetooth turned on. Check your keyboard's manual or the bottom of the device to see where the battery compartment is — most Logitech wireless keyboards use two AA or AAA batteries. If the keyboard has a power switch, flip it to the on position.
Key Takeaways
- Turn on your Logitech keyboard and hold the Bluetooth pairing button (usually on the back or bottom) for three to five seconds until the light blinks.
- On your device, open Bluetooth settings and look for the keyboard name — it usually starts with "Logitech" — then select it to pair.
- Once paired, the keyboard remembers your device and connects automatically the next time both are turned on and in range.
- If pairing fails, restart both the keyboard and your device, then try again from the pairing mode step.
- Logitech keyboards typically work with any device that has Bluetooth, including phones, tablets, and computers from different manufacturers.
Finding and using the pairing button
The pairing button on a Logitech keyboard is usually a small recessed button labeled with a Bluetooth symbol or the word "Pair." On most models, it is located on the back or underside of the keyboard. Look for a button you have to press with a pen or paperclip rather than your finger — this prevents accidental pairing.
Press and hold this button for three to five seconds. You will see a light on the keyboard start to blink, usually blue or white. This blinking means the keyboard is in pairing mode and searching for a device to connect to. The keyboard stays in pairing mode for about two to three minutes, so you have time to move to your device and start the pairing process there.
If you cannot find the pairing button, check the underside of the keyboard or the battery compartment area. Some newer Logitech models have the button integrated into the power switch — you may need to hold the power switch for longer than usual to enter pairing mode. Your keyboard's manual or the Logitech website for your specific model will show the exact location.
Pairing with Windows
On a Windows PC, open the Settings app and go to Devices, then Bluetooth & other devices. Make sure Bluetooth is turned on — you will see a toggle switch at the top. Click "Add Bluetooth or other device" and select Bluetooth from the menu that appears.
Your keyboard should appear in the list within a few seconds if it is in pairing mode. The name will usually be something like "Logitech K380" or "Logitech MX Keys" depending on your model. Click on it to pair. Windows will show a confirmation message when the connection is complete, and the keyboard is ready to use when ready.
If the keyboard does not appear in the list, make sure the pairing button is still being held or was just released. Go back and press it again for three to five seconds, then refresh the Bluetooth list on your computer by clicking "Add Bluetooth or other device" again.
Pairing with Mac
On a Mac, click the Apple menu in the top left corner and select System Settings (or System Preferences on older versions). Go to Bluetooth and make sure it is turned on. You will see a list of available devices.
Press the pairing button on your Logitech keyboard and watch for it to appear in the list. Click on the keyboard name and then click "Connect." Mac will ask you to type a four-digit code on the keyboard to confirm the pairing — this is normal and adds a layer of security. Type the code using the keyboard itself, then press Enter. The keyboard is now paired and ready to use.
Pairing with iPad or iPhone
On an iPad or iPhone, go to Settings, then Bluetooth. Make sure Bluetooth is turned on. Press the pairing button on your Logitech keyboard until the light blinks, then look for the keyboard name in the list of available devices.
Tap the keyboard name to pair. Unlike Mac, iOS devices do not usually require a confirmation code for Logitech keyboards. The pairing completes in a few seconds, and you will see a checkmark next to the keyboard name. The keyboard is now ready to use with your iPad or iPhone.
Pairing with Android
On an Android phone or tablet, open Settings and go to Connected devices or Bluetooth (the exact name varies by manufacturer). Turn Bluetooth on if it is not already. Press the pairing button on your Logitech keyboard and wait for the light to blink.
Tap "Pair new device" or look for the keyboard in the list of available devices. The name will start with "Logitech." Tap it to pair. Some Android devices may ask for a confirmation code — if so, type it on the keyboard and press Enter. Once paired, the keyboard works when ready.
Reconnecting after the first pairing
After the first pairing, you do not need to repeat the pairing process. straightforward turn on your Logitech keyboard and turn on Bluetooth on your device. The keyboard will automatically connect within a few seconds. This automatic reconnection works as long as the keyboard and device have been paired before and are within Bluetooth range (typically 30 feet or less).
If the keyboard does not reconnect automatically, turn the keyboard off and back on, or toggle Bluetooth off and back on on your device. If you want to pair the keyboard with a different device, you can usually just turn on Bluetooth on the new device and press the pairing button again — most Logitech keyboards can pair with multiple devices and remember them.
Troubleshooting connection problems
If your keyboard will not pair, the most common cause is that it is not actually in pairing mode. Make sure you are pressing the pairing button long enough — three to five seconds is the standard, and you should see the light blink. If the light does not blink, try pressing the button again or check that the batteries are not dead.
If the keyboard pairs but does not type, restart both the keyboard and your device. Turn off the keyboard, wait five seconds, and turn it back on. On your device, toggle Bluetooth off and back on. Try typing again. If this does not work, unpair the keyboard from your device's Bluetooth settings and repeat the pairing process from the beginning.
If the keyboard pairs with one device but you want to use it with another, you do not need to unpair it from the first device. Most Logitech keyboards remember multiple paired devices and will connect to whichever one is turned on and in range. If the keyboard keeps connecting to the wrong device, turn off Bluetooth on the device you do not want to use, then turn it back on when you are ready to switch.
Frequently Asked Questions
How do I know if my Logitech keyboard is in pairing mode?
The light on the keyboard will blink, usually blue or white. If the light is solid or not lit at all, the keyboard is not in pairing mode. Press the pairing button again for three to five seconds until you see the blinking light.
Can I use a Logitech keyboard with multiple devices at the same time?
No, the keyboard can only type on one device at a time. However, most Logitech keyboards remember multiple paired devices and will connect to whichever one is turned on and in range. You can switch between devices by turning Bluetooth off on one and on on another.
Why is my keyboard not showing up in the Bluetooth list?
The keyboard is probably not in pairing mode. Press the pairing button on the back or bottom of the keyboard for three to five seconds until the light blinks. If the light does not blink, check that the batteries are installed and the keyboard is turned on.
Do I need to pair my keyboard every time I use it?
No. After the first pairing, the keyboard automatically connects to your device when both are turned on and in range. You only need to pair once per device.
What should I do if the keyboard pairs but the keys do not work?
Restart both the keyboard and your device. Turn off the keyboard, wait five seconds, and turn it back on. On your device, toggle Bluetooth off and back on. If typing still does not work, unpair the keyboard and pair it again from the beginning.