The SIM card tray is on the side of your iPhone, and you open it with a small metal tool

The SIM card tray is a small slot on the edge of your iPhone that holds the card your phone uses to connect to a cellular network. To open it, you need the SIM eject tool — a thin metal pin that comes in the box with your iPhone, or one you can buy separately for a few dollars. You push this tool straight into the small hole next to the tray until the tray pops out slightly, then pull the tray the rest of the way out by hand.

The location of the tray depends on your iPhone model. On iPhone 14, 15, and most newer models, it is on the right side of the phone. On older models like iPhone 6 through iPhone 13, it is also on the right side but lower down. On iPhone XS, XS Max, and XR, it is on the right side near the top. The hole you push the tool into is always right next to the tray itself, and it is small enough that only the eject tool fits — this design prevents accidental opening.

Key Takeaways

  • The SIM eject tool comes with your iPhone in the box, or you can use a straightened paperclip or buy a replacement tool for a few dollars.
  • Push the tool straight into the hole next to the tray with gentle, steady pressure until you feel the tray release — do not force it or angle the tool.
  • The tray location varies by model: right side on all modern iPhones, but the exact height differs between iPhone 14/15, iPhone 6-13, and older models.
  • Once the tray pops out, you can remove or insert a SIM card, but the phone will not connect to cellular service until you restart it after making changes.

Where to find the SIM tray on your specific iPhone model

The right side of your iPhone is where the tray always sits, but the exact spot varies. On iPhone 14, 14 Plus, 15, and 15 Plus, look for the small hole near the top of the right edge, just below the power button. On iPhone 13, 13 mini, 12, 12 mini, 11, XS, XS Max, and XR, the tray is also on the right side but positioned lower, roughly in the middle of the phone's height. On iPhone X, 8, 8 Plus, 7, 7 Plus, 6s, 6s Plus, 6, and 6 Plus, the tray is on the right side as well, positioned in the lower half.

If you have an iPhone SE (any generation), the tray is on the right side near the middle. The hole next to the tray is always the same size and appearance — a small circular indent that is barely visible unless you look closely. Run your finger along the right edge of your phone and you will feel a slight ridge where the tray sits. The hole is right beside this ridge.

How to use the SIM eject tool correctly

The SIM eject tool is a thin metal pin, usually about two inches long, with a small flat or rounded end. If you do not have the original tool, a straightened paperclip works just as well — the key is that it needs to be thin enough to fit into the hole without forcing. You can also buy replacement eject tools online for two to five dollars if you have lost yours.

Hold your iPhone steady in one hand and position the tool at the hole with your other hand. Push the tool straight in — not at an angle — with gentle, steady pressure. You will feel a small click or resistance as the tray releases. Stop pushing when ready when you feel this. Do not force the tool deeper or twist it, as this can damage the mechanism inside. The tray should pop out just enough that you can grip it with your fingernail and pull it the rest of the way out by hand.

If the tray does not pop out after gentle pressure, remove the tool and try again. Sometimes the tray is stuck slightly and needs a second attempt. If it still does not release, stop and try a different tool — a bent paperclip or a tool that is too thick can fail to trigger the release mechanism properly.

Removing and reinserting your SIM card

Once the tray is out, you will see a small rectangular slot where the SIM card sits. The card is usually held in place by friction alone — no clips or latches. To remove it, gently push it out from the tray with your fingernail or the edge of the eject tool. The card will slide out easily if you are pushing in the right direction.

To insert a new SIM card, position it in the tray with the gold contacts facing down and the cut corner (the notch) aligned with the notch in the tray. The card should sit flat and flush with the tray. Slide the tray back into the phone until it clicks into place. The phone will not recognize the new SIM card until you restart it — turn the phone off completely, wait a few seconds, and turn it back on.

What to do if the tray is stuck or damaged

If the tray will not pop out even with gentle pressure, the mechanism may be stuck. Try using a different eject tool — sometimes a bent tool or one that is slightly too thick will not trigger the release properly. If you switch tools and the tray still does not move, stop trying. Forcing it can break the internal mechanism, which requires a repair visit to an Apple Store.

If the tray itself is cracked, bent, or the hole is damaged, you will need a replacement tray. Apple Stores carry replacement trays for most models and can install one during a walk-in visit, usually at no cost if the damage is not from physical abuse. If the internal mechanism is broken — meaning the tray will not stay in place or the release button does not work — this requires a repair that Apple handles in-store.

Why your phone needs a SIM card and what happens without one

The SIM card tells your phone which cellular network to connect to and which account to bill for service. Without it, your phone cannot make calls, send text messages, or use cellular data — it can only connect to Wi-Fi. If you remove your SIM card and restart your phone, you will see "No SIM" in the status bar at the top of the screen.

If you are switching to a new phone, you will need to move your SIM card to the new device. If you are switching carriers, you will need a new SIM card from the new carrier — they will provide one when you sign up for service. If you are traveling internationally, you may want to insert a local SIM card instead of your home carrier's card to avoid roaming charges, though this means you will lose access to your home phone number until you switch back.

Frequently Asked Questions

Can I open the SIM tray without the eject tool?

Yes. A straightened paperclip, a small safety pin, or even a thin earring post will work if the tool is thin enough to fit the hole. The key is that the object needs to be small enough to slide in without forcing and sturdy enough not to bend. Avoid using anything too thick or blunt, as it will not trigger the release mechanism.

What if I push the eject tool in and nothing happens?

The tool may not be going in straight, or it may be too thick for the hole. Remove it and try again, making sure you are pushing directly into the hole and not at an angle. If you have a different tool available, try that instead. If the tray still does not pop out, the mechanism may be stuck or damaged — stop trying and visit an Apple Store.

Will my phone work if I leave the SIM tray out?

No. The tray must be fully inserted and seated for the phone to recognize the SIM card. If the tray is partially out or not clicked all the way in, your phone will show "No SIM" even though the card is in the tray. Push the tray in until you hear or feel a click.

Do I need to turn off my phone before opening the SIM tray?

No. You can open the SIM tray while your phone is on. However, if you are removing or inserting a SIM card, you should restart your phone after making the change so it can recognize the new card and reconnect to the network.

What is the small notch on my SIM card for?

The notch is a safety feature that prevents you from inserting the card upside down or backwards. The notch on the card must line up with the notch in the tray. This design makes it impossible to insert the card incorrectly, so you do not have to worry about damaging it by putting it in the wrong way.