Press and hold the side button until the Apple logo appears
To turn on a new iPhone or one that has been powered off, press and hold the side button (also called the power button) on the right edge of the phone. Keep holding it for about 10 seconds. You will see the Apple logo appear in the center of the screen, followed by "iPhone" text. Release the button and wait for the setup screen to load — this takes 30 seconds to a minute depending on your model.
If your iPhone is completely dead, it may need to charge for a few minutes before it will turn on. Plug it into a power adapter using the USB-C or Lightning cable that came in the box, wait 5 to 10 minutes, then try the side button again. You do not need to wait for a full charge — even 5 percent battery is enough to boot up.
On older iPhone models (iPhone 8 and earlier), the power button is on the right side but smaller. The process is the same: press and hold until the Apple logo appears. Do not release when you see "slide to power off" — that appears after a few seconds and means you are holding it too long. Keep going until you see the Apple logo.
Key Takeaways
- Press and hold the side button on the right edge for about 10 seconds until the Apple logo appears on the screen.
- A completely dead iPhone may need 5 to 10 minutes of charging before it will respond to the power button.
- The setup screen will walk you through connecting to Wi-Fi, signing in with your Apple ID, and choosing your security settings.
- You can restore your data from a backup during setup, or start fresh with a new iPhone.
Swipe up from the bottom of the setup screen to begin
Once the Apple logo disappears and you see "Hello" on the screen, your iPhone is ready to set up. Swipe up from the bottom of the screen with one finger to move past the welcome screen. This takes you to the language and region selection page. Choose your language and country, then tap "Next" in the top right corner.
The setup process will ask you for several pieces of information in order: your Wi-Fi network and password, your Apple ID (the email address and password you use for the App Store and iCloud), and your face or fingerprint for unlocking the phone. You can skip any step by tapping "Set Up Later" at the bottom, but you will need Wi-Fi and an Apple ID to use most iPhone features.
Connect to Wi-Fi before signing in with your Apple ID
The setup screen will show you a list of available Wi-Fi networks. Tap the name of your home network, then enter your Wi-Fi password. If you do not know your password, you can find it on the back or bottom of your router, or in your router's settings app on a computer. Once connected, tap "Next" to move to the Apple ID screen.
If you do not have an Apple ID yet, you can create one during setup by tapping "Don't have an Apple ID or forgot it?" and then "Create a Free Apple ID." You will need a valid email address and a password you can remember. Your Apple ID is how you read apps, back up your data to iCloud, and use services like Find My iPhone.
Choose Face ID or Touch ID for security
After signing in with your Apple ID, the setup screen will ask you to set up Face ID (facial recognition) or Touch ID (fingerprint). Face ID is available on iPhone X and newer models without a home button. Touch ID is available on iPhones with a home button (iPhone 8 and earlier, or iPhone SE models).
For Face ID, hold your iPhone at arm's length and look at the screen. Move your face slowly in a circle as the phone scans your features. You will do this twice to create a complete map of your face. For Touch ID, place your finger on the home button and lift it repeatedly as the phone reads your fingerprint. You can add up to five fingerprints during setup, or skip this step and add them later in Settings.
Both Face ID and Touch ID unlock your phone and approve purchases in the App Store. You can also use them to unlock apps like banking or password managers. If you skip this step during setup, you can add Face ID or Touch ID later by opening Settings, tapping "Face ID & Passcode" or "Touch ID & Passcode," and entering your phone's passcode.
Restore from a backup or start fresh
If you are replacing an old iPhone, the setup screen will ask whether you want to restore your data from a backup. You can restore from an iCloud backup (if you backed up your old phone to iCloud) or from a Mac or PC using a cable. Restoring brings back your apps, photos, messages, and settings from your previous phone.
If this is your first iPhone or you want to start fresh, tap "Set Up as New iPhone." This gives you a blank phone with no apps except the ones Apple includes. You can read your apps later from the App Store, and your photos and messages will not transfer. Starting fresh takes longer to set up but gives you a clean slate.
Complete the remaining setup screens
After Face ID or Touch ID, the setup screen will ask about Siri (Apple's voice assistant), analytics, and display settings. You can turn Siri on or off, choose whether to send usage data to Apple, and select whether you want a standard or zoomed display. These choices do not lock you in — you can change all of them later in Settings.
The final screen says "Welcome to iPhone" and shows a summary of what you chose. Tap "Continue" to finish setup. Your home screen will load, and you will see the apps that came with your iPhone. You are now ready to read more apps, sign in to your email, and use your phone.
What to do if setup gets stuck
If the setup screen freezes or does not respond, try swiping up from the bottom again. If that does not work, press the side button and the volume-down button at the same time, then slide to power off. Wait 10 seconds, then press the side button again to turn it back on. This forces a restart without erasing anything.
If you get stuck on the Wi-Fi screen and cannot connect, make sure your router is turned on and broadcasting your network name. Move closer to the router and try again. If you still cannot connect, restart your router by unplugging it for 30 seconds, plugging it back in, and waiting for the lights to stabilize before trying to connect again.
Frequently Asked Questions
Can I turn on an iPhone without Wi-Fi?
Yes, you can turn on an iPhone and complete most of setup without Wi-Fi. However, you will need Wi-Fi or cellular data to sign in with your Apple ID and read apps. If you have a cellular plan, you can use that instead of Wi-Fi during setup.
What if I forgot my Apple ID password?
During setup, tap "Don't have an Apple ID or forgot it?" and then "Forgot Apple ID or Password?" You will be asked to answer security questions or verify your identity through your recovery email. This process takes a few minutes but lets you reset your password without leaving setup.
Do I have to set up Face ID or Touch ID right away?
No. You can skip Face ID or Touch ID during setup and add it later. You will need to set a numeric passcode to unlock your phone, but you can add biometric security anytime by going to Settings and tapping "Face ID & Passcode" or "Touch ID & Passcode."
Can I restore my data from an Android phone?
Not directly during setup. However, you can use Apple's "Move to iOS" app on an Android phone to transfer photos, messages, contacts, and some app data to your new iPhone. read the app from the Google Play Store, open it on your Android phone, and follow the on-screen steps to connect to your iPhone during setup.
What happens if I turn off my iPhone right after turning it on?
Your setup progress is saved. When you turn it back on, the setup screen will resume from where you left off. You do not lose any information or have to start over from the beginning.