Turn on Apple Pencil pairing in Settings

To use an Apple Pencil with your iPad, you first need to pair it — which means telling your iPad to recognize and connect to that specific stylus. The pairing process is straightforward and happens in your iPad's Bluetooth settings, the same place where you'd connect wireless headphones or a keyboard.

Open Settings on your iPad, then tap Bluetooth. Make sure Bluetooth is turned on (the toggle should be green). Your iPad will start searching for nearby devices. Take your Apple Pencil and hold it close to the iPad — within a few inches. After a few seconds, the Apple Pencil should appear in the list of available devices under "Other Devices". Tap it to pair.

Once paired, the Apple Pencil will appear under "My Devices" in Bluetooth settings, and you're ready to use it. The pairing usually takes less than a minute. If your Apple Pencil doesn't appear in the list, make sure it's charged — a low battery can prevent it from showing up.

Key Takeaways

  • Apple Pencil pairs through Bluetooth in your iPad's Settings app, not through a separate app or menu.
  • Your Apple Pencil must be charged and held close to the iPad during pairing, or it won't appear in the device list.
  • Once paired, the Apple Pencil stays connected to that iPad unless you unpair it or pair it with a different device.
  • Different iPad and Apple Pencil models have different pairing methods — USB-C models and newer iPad Pros pair differently than older versions.

Pairing an older Apple Pencil (1st generation)

The original Apple Pencil pairs through the iPad's Lightning connector port at the bottom of the device. Plug the Apple Pencil directly into the Lightning port — it will stick out at an angle. A pairing prompt will appear on your screen asking you to confirm. Tap "Pair" and wait a few seconds. The Apple Pencil will then appear in Bluetooth settings as a paired device.

This pairing method is specific to the 1st generation Apple Pencil and older iPad models. Once paired this way, you don't need to plug it in again to use it — the Bluetooth connection handles that. You only plug it in to charge.

Pairing a newer Apple Pencil (2nd generation and later)

Apple Pencil 2nd generation and the newer Apple Pencil Pro pair through Bluetooth only, not through a physical port. Hold the Apple Pencil close to your iPad with Bluetooth turned on in Settings. The pencil should appear in the Bluetooth device list within a few seconds. Tap it to pair, and you're done.

These newer models also charge wirelessly by magnetically attaching to the side of compatible iPad Pro and iPad Air models. The pairing process is the same regardless of how you charge it — Bluetooth is always the method.

Check which Apple Pencil model you have

If you're not sure which generation your Apple Pencil is, look at the physical design. The 1st generation has a removable cap at the top and a Lightning connector port at the bottom. The 2nd generation is flat on one side (where it magnetically attaches to the iPad) and has no removable cap. The Apple Pencil Pro looks similar to the 2nd generation but is slightly heavier and has a squeeze gesture feature.

You can also check in Settings: go to Bluetooth, find your paired Apple Pencil in the list, and tap the information icon next to it. The model name will appear there. Knowing your model matters because the pairing method and compatible iPads differ between generations.

Troubleshoot if your Apple Pencil won't pair

If your Apple Pencil doesn't appear in the Bluetooth list, first check the battery. Plug it in to charge (using the method for your model — Lightning port for 1st generation, or magnetic attachment for 2nd generation and Pro). Wait at least 15 minutes, then try pairing again. A completely drained Apple Pencil won't show up in the device list.

If the battery isn't the issue, try restarting your iPad. Go to Settings, then General, then Shut Down. Wait a few seconds, then press and hold the top button to turn it back on. Once it's restarted, turn Bluetooth off and back on in Settings, then try pairing the Apple Pencil again.

If pairing still fails, unpair the Apple Pencil if it's already listed in Bluetooth settings. Tap the information icon next to it and select "Forget This Device". Then restart your iPad again and attempt a fresh pairing. This clears any corrupted connection data that might be blocking the process.

What to do after pairing is complete

Once your Apple Pencil is paired and connected, you can use it in any app that supports it — Notes, Procreate, Adobe Fresco, and many others. The Apple Pencil will stay connected as long as Bluetooth is on. If you turn Bluetooth off, the connection drops, but the pairing remains saved. Turn Bluetooth back on and the Apple Pencil will reconnect automatically.

You can also adjust Apple Pencil settings in the iPad's Settings app. Go to Settings, then Apple Pencil (or Stylus, depending on your iPad model). Here you can control features like double-tap behavior, pressure sensitivity, and whether the pencil tip is used for selecting or drawing. These settings let you customize how the Apple Pencil responds to your touch.

Pair your Apple Pencil with a different iPad

An Apple Pencil can only be paired with one iPad at a time. If you want to use it with a different iPad, you need to unpair it from the first one. Go to Bluetooth settings on the original iPad, find the Apple Pencil in the list, tap the information icon, and select "Forget This Device".

Then take the Apple Pencil to the new iPad, turn on Bluetooth, and pair it there using the same method you used the first time. The pairing process is identical — the Apple Pencil will appear in the device list and you tap it to connect. Once paired with the new iPad, it won't reconnect to the old one unless you unpair it again and repeat the process.

Frequently Asked Questions

Do I need to pair my Apple Pencil every time I use it?

No. Once you pair your Apple Pencil, it stays paired to that iPad. You only pair it once. Each time you turn on Bluetooth and bring the Apple Pencil close to the iPad, it reconnects automatically. You only pair again if you unpair it intentionally or pair it with a different device.

Can I use an Apple Pencil with any iPad?

No. Apple Pencil 1st generation works with iPad (5th generation and later), iPad Air 2, and iPad mini 4 and later. Apple Pencil 2nd generation and Pro work only with iPad Pro (2nd generation and later) and iPad Air (3rd generation and later). Check Apple's compatibility list for your specific iPad model before buying an Apple Pencil.

What if my Apple Pencil is paired but won't draw?

First, make sure the app you're using supports Apple Pencil — not all apps do. Then check the tip. If it's worn down or damaged, replace it with a new tip (Apple sells replacement tips). If the tip looks fine, restart the app and try again. If that doesn't work, unpair and re-pair the Apple Pencil in Bluetooth settings.

How long does Apple Pencil battery last?

Battery life varies by model. Apple Pencil 1st generation lasts about 12 hours of use on a full charge. Apple Pencil 2nd generation and Pro last about 12 hours as well. Charge time is typically 15 to 30 minutes depending on the model and charger. The battery drains slowly even when not in use, so charge it regularly if you use it often.

Can I pair two Apple Pencils to the same iPad?

No. An iPad can only be paired with one Apple Pencil at a time. If you want to switch between two pencils, you'd need to unpair one and pair the other. This takes a minute or two, but it's the only way to use multiple pencils with a single iPad.