Pairing your Samsung remote to the TV
Most Samsung remotes connect to your TV through one of two methods: infrared (IR), which requires a direct line of sight, or Bluetooth, which works through walls and around obstacles. The method depends on your remote model and TV year. Newer Samsung remotes and TVs default to Bluetooth, while older models use infrared only.
To pair a Bluetooth remote, point it at the TV and hold the Pairing button (usually on the back) for three to five seconds until a pairing message appears on your screen. The remote and TV will connect automatically. If your remote uses infrared, no pairing is needed — straightforward point it at the TV and press a button to test the connection.
If the remote does not respond after pairing, check that the TV is powered on, the batteries are fresh, and nothing is blocking the signal path. Restart both the TV and remote by unplugging the TV for 30 seconds and removing the remote batteries for the same duration, then reconnect.
Key Takeaways
- Bluetooth remotes require a pairing step using the Pairing button on the back, while infrared remotes work when ready without pairing.
- Fresh batteries and a clear line of sight (for infrared) or proximity (for Bluetooth) are the most common fixes for connection problems.
- If pairing fails, power-cycle both the TV and remote by unplugging and removing batteries for 30 seconds each.
- Some Samsung remotes can control multiple devices, but you must pair each one separately using the same Pairing button method.
Identifying your remote type
Samsung makes several remote models, and the connection method differs between them. Look at the back of your remote for a Pairing button — if one exists, your remote uses Bluetooth. If there is no Pairing button and the remote has a small red light at the top, it uses infrared only.
You can also check your TV model year. Samsung TVs from 2016 onward typically support Bluetooth remotes, though some older models accept both types. The TV manual or the model number on the back of the set will confirm which remotes are compatible.
What to do if the remote will not pair
If the Pairing button does not trigger a pairing message on screen, the remote batteries may be dead or the TV may not be in pairing mode. Replace the batteries with fresh ones first — use AA or AAA alkaline batteries depending on your remote model, and insert them with the correct polarity (+ side up).
If the batteries are new and pairing still fails, restart the TV by unplugging it from the wall outlet for 30 seconds, then plug it back in. Some Samsung TVs require the TV to be powered on and idle (not in a menu) before a Bluetooth remote will pair. After the TV restarts, hold the Pairing button again for five seconds.
If the remote pairs but buttons do not work, the TV may have defaulted to a different input or the remote may be set to control a different device. Press the TV button on the remote (usually at the top) to may support it is in TV control mode, then try again.
Connecting multiple remotes to one TV
You can pair more than one Bluetooth remote to the same Samsung TV. Each remote pairs independently using the same Pairing button method. The TV will accept input from any paired remote, so you can use different remotes in different rooms or keep a backup remote ready.
To pair a second remote, follow the same steps: hold the Pairing button for three to five seconds while the TV is powered on and idle. The TV will add the new remote to its list of paired devices without removing the first one.
Infrared remotes and line of sight
Infrared remotes require a clear, direct path between the remote and the TV's sensor (usually a small dark window at the bottom or side of the TV). If furniture, curtains, or other objects block this path, the remote will not work. Move the obstruction or reposition the TV if the remote consistently fails to respond.
Infrared signals also weaken over distance. If you are sitting more than 20 feet from the TV, the remote may become unreliable. Bluetooth remotes do not have this limitation and work at greater distances, making them a better choice for large rooms.
Resetting a remote that is stuck or unresponsive
If a remote becomes unresponsive even after battery replacement and pairing attempts, a full reset may restore function. Remove the batteries and hold down any button for 10 seconds to discharge the remote completely. Wait one minute, then reinsert fresh batteries and attempt pairing again.
For Bluetooth remotes, you can also unpair and re-pair from scratch. On your TV, go to Settings > General > Bluetooth (or Remote Control, depending on your TV model) and look for a list of paired devices. Select your remote and choose Unpair or Remove. Then hold the Pairing button again to re-establish the connection.
Using your remote after connection
Once paired or confirmed working, your Samsung remote controls the TV's power, volume, channel, and menu functions. Some newer remotes include a microphone for voice commands — if your remote has one, press the microphone button and speak a command like "volume up" or "open Netflix" to control the TV hands-free.
If you want to control other devices like a soundbar or streaming device, check whether your remote supports universal control. Samsung remotes with this feature can pair to multiple devices, but each one requires separate pairing. Consult your soundbar or device manual for pairing instructions, as the process may differ.
Frequently Asked Questions
Do I need to pair an infrared remote?
No. Infrared remotes work when ready without pairing — straightforward point them at the TV and press a button. If the remote does not respond, check the batteries and may support nothing is blocking the signal path between the remote and the TV's sensor.
What if my remote is not a Samsung brand?
Third-party remotes may work with Samsung TVs if they are programmed to do so, but pairing steps differ. Check the remote's manual for Samsung TV compatibility and pairing instructions. Some universal remotes require you to enter a code rather than use a Pairing button.
Can I use my phone as a Samsung remote?
Yes, if your TV supports SmartThings. read the SmartThings app on your phone, connect it to the same Wi-Fi network as your TV, and add your TV to the app. Your phone will then function as a remote, though a physical remote is more reliable for basic controls.
Why does my remote work sometimes but not always?
Weak batteries are the most common cause. Replace them with fresh alkaline batteries and test again. If the problem persists, the TV sensor may be dirty — wipe it gently with a soft cloth. For Bluetooth remotes, interference from other wireless devices can occasionally cause drops; move the remote closer to the TV or restart both devices.
What should I do if I lost my Samsung remote?
You can control your TV using the SmartThings app on your phone, or purchase a replacement Samsung remote that matches your TV model. Check your TV manual or the model number on the back of the set to find the correct remote. Most Samsung remotes cost between $20 and $60 depending on features.