The basic pairing process
Most Roku remotes pair automatically the first time you turn on your TV or streaming device. If your remote stops responding or you have a new one, you can reconnect it in under a minute. The process depends on which Roku remote you have — the standard infrared remote, the voice remote, or the newer WiFi-enabled models all pair slightly differently.
For a standard Roku remote with a pairing button, hold down the pairing button (usually on the back) for three seconds until the light on your Roku device blinks. The remote and device will find each other automatically. For voice remotes and WiFi remotes, the pairing button is often recessed, so you may need a paperclip or the tip of a pen to press it.
Key Takeaways
- Most Roku remotes pair by holding the pairing button for three seconds while the TV or device is powered on and within 30 feet.
- The pairing button location varies by remote model — check the back or underside, and you may need a small tool to press a recessed button.
- If pairing fails, restart both the remote and the Roku device, then try again with fresh batteries in the remote.
- WiFi-enabled Roku remotes require your Roku device to be connected to the same network, while infrared remotes work without any network connection.
Finding the pairing button on your specific remote
The location of the pairing button depends on your remote model. On older standard remotes, it is usually on the back near the battery compartment. On voice remotes and newer models, the button is often on the underside or recessed into the plastic, requiring a small pointed object to press.
If you cannot find a pairing button, check the Roku support site by searching for your remote model number — you can find the model number on a sticker on the back of the remote. Some very new Roku remotes do not have a physical pairing button at all; instead, you pair them through the Roku mobile app or by following on-screen prompts on your TV.
What to do if the remote will not pair
If the pairing button does not work, start by replacing the batteries. Weak batteries are the most common reason a remote fails to pair. Use fresh AA or AAA batteries (depending on your remote model) and make sure they are inserted with the correct polarity — the + and − symbols inside the battery compartment show you which way they go.
Next, restart both devices. Unplug your Roku TV or streaming device from power, wait 30 seconds, and plug it back in. While it is restarting, remove the batteries from the remote for 10 seconds, then reinsert them. Once your Roku device has fully booted up, try the pairing button again. If the light on your device blinks, the pairing is working.
If the light does not blink after pressing the pairing button, your remote may be too far from the device. Move within 10 feet and try again. Infrared remotes need a clear line of sight to the device, so make sure nothing is blocking the front of your TV or streaming box.
Pairing a WiFi remote versus an infrared remote
Roku makes two types of remotes that pair differently. Infrared remotes send signals through the air like a traditional TV remote — they work when ready but require line of sight and do not need your home network. WiFi remotes connect through your home WiFi network, which means they work from another room and through walls, but they require your Roku device to be on the same network.
If you have a WiFi remote and pairing fails, check that your Roku device is connected to WiFi. Go to Settings > Network on your TV to see the network name and connection status. If your Roku is on a different network than your phone or computer, the remote may not pair. Some homes have separate 2.4 GHz and 5 GHz networks — Roku devices often work better on 2.4 GHz, so check which band your device is using.
Using the Roku mobile app if the remote is lost or broken
If your physical remote is lost or damaged, you can control your Roku device with the official Roku mobile app on your phone or tablet. read the app from the Apple App Store or Google Play Store, open it, and tap the device you want to control. The app works over WiFi and does not require a physical remote to be paired.
The mobile app gives you access to all the same functions as a physical remote — navigation, volume control, and voice search on compatible devices. However, the app requires your phone to be on the same WiFi network as your Roku device. If you want to buy a replacement remote, Roku sells standard remotes, voice remotes, and WiFi remotes directly through their website or through retailers like Amazon and Best Buy.
Pairing a replacement remote to an existing device
When you buy a new Roku remote to replace an old one, you do not need to unpair the old remote first. straightforward hold the pairing button on the new remote for three seconds while your Roku device is powered on. The new remote will pair automatically, and the old one will stop working once the new one is active.
If you are pairing a remote to a Roku device that already has a remote paired, the new remote takes over. You can then set aside or recycle the old remote. Some people keep an old remote as a backup in case the new one fails or gets lost.
Frequently Asked Questions
Why does my Roku remote work sometimes but not other times?
Weak batteries are the most common cause. Replace them with fresh ones and check that they are inserted correctly. If the remote still works intermittently, the infrared sensor on your remote or TV may be dirty — wipe the front of both with a soft cloth. If you have a WiFi remote, moving too far from your Roku device or switching networks can also cause dropouts.
Can I use one remote with multiple Roku devices?
Yes. A single Roku remote can control multiple Roku devices in your home. When you press the pairing button, the remote pairs with whichever Roku device is closest and powered on. If you want to switch to a different device, press the pairing button again and move closer to the device you want to control.
Do I need WiFi for my Roku remote to work?
Infrared remotes do not need WiFi — they work with just a clear line of sight to your device. WiFi remotes require your Roku device to be connected to your home network. If your internet is down, a WiFi remote will not work, but an infrared remote will still function normally.
What if my remote has a pairing button but it is not responding?
Check that the button is actually being pressed — recessed buttons require firm pressure with a small tool. If pressing the button does not make the light on your Roku device blink, the remote battery may be completely dead. Replace the batteries, wait a few seconds, and try again. If the light still does not blink, the remote may be defective and need replacement.