Start with your Apple Watch unpaired from the old phone
Before you can connect your Apple Watch to a new iPhone, you need to remove it from your old one. This takes a few minutes and prevents the watch from trying to sync with both phones at once.
Open the Watch app on your old iPhone. Tap the My Watch tab at the bottom, then tap All Watches at the top left. Find your watch in the list, tap the information icon (a small circle with an "i"), and select Unpair Apple Watch. The phone will ask you to confirm — tap Unpair again. Your watch will restart and return to its factory state.
If you no longer have access to your old iPhone, you can unpair the watch directly on the device itself. Press and hold the side button until you see the power menu, then press and hold again until you see "Erase all content and settings." This takes longer but accomplishes the same thing.
Key Takeaways
- Unpair your watch from the old iPhone first by opening the Watch app, finding your watch under All Watches, and selecting Unpair Apple Watch.
- On your new iPhone, open the Watch app and tap Start Pairing, then hold your new phone's camera over the animation on the watch screen.
- Sign in with the same Apple ID you use on your new iPhone — this restores your watch settings, apps, and data automatically.
- The pairing process takes five to ten minutes, and your watch will restart several times during setup.
- Keep both devices close together and connected to Wi-Fi during pairing to avoid connection drops.
Open the Watch app on your new iPhone and begin pairing
Once your watch is unpaired and your new iPhone is set up, you are ready to connect them. Open the Watch app on your new iPhone — it comes pre-installed and has a small watch icon on your home screen.
Tap Start Pairing in the center of the screen. Your new iPhone will ask for permission to access your location and Bluetooth — tap Allow for both. The phone's camera will open and show you a viewfinder with an animation in the center.
Hold your Apple Watch in front of the iPhone's camera so the watch face is visible in the viewfinder. The camera will scan the watch's unique code and recognize it automatically. You will see a message saying "Pairing in progress" — keep the watch steady until the scan completes, which usually takes ten to fifteen seconds.
Sign in with your Apple ID and choose your backup
After the scan finishes, your new iPhone will ask you to sign in with your Apple ID. Use the same Apple ID that you use on your new iPhone — this is important because it tells the watch to restore your previous settings, apps, and data.
Next, you will see a screen asking whether to restore from a backup or set up as new. If you had a backup of your old watch, the phone will offer to restore it. Tap Restore from Backup to get back your watch faces, app layout, and saved data. If you want to start fresh, tap Set Up as New Apple Watch instead.
The watch will restart and begin downloading your apps and data. This step takes the longest — anywhere from five to fifteen minutes depending on how many apps you have and how fast your Wi-Fi is. Leave both devices close together and plugged in if possible.
Wait for the watch to finish syncing and restart
During setup, your watch will restart multiple times. You will see the Apple logo appear on the watch face, then disappear, then appear again. This is normal — do not interrupt the process or move the watch away from the iPhone.
The watch screen will show a progress indicator as it downloads apps and settings. Once the progress bar reaches the end, the watch will restart one final time and show the watch face. This means pairing is complete.
If the process stalls or fails partway through, the watch will show an error message. The most common fix is to move both devices closer to your Wi-Fi router and try again. If pairing fails twice, unpair the watch again and start over from the beginning.
Verify that your watch is connected and working
Once the watch finishes restarting, check that it is fully connected. On your new iPhone, open the Watch app and tap My Watch. You should see your watch listed at the top with a green dot next to its name. A green dot means the watch is paired and connected to your phone.
Swipe down from the top of your watch screen to open Control Center. You should see a green Bluetooth icon, which means the watch is communicating with your iPhone. If you see a red or gray Bluetooth icon instead, the connection dropped — move the devices closer together and wait a few seconds for the connection to restore.
Send a test message from your iPhone to someone. On your watch, you should receive a notification within a few seconds. If notifications arrive on your phone but not on your watch, open the Watch app on your iPhone, tap Notifications, and make sure notifications are turned on for the apps you want to use.
Set up Apple Pay and other services on the watch
If you use Apple Pay on your watch, you will need to add your payment cards again. Open the Watch app on your iPhone, tap Wallet & Apple Pay, and tap Add Card. You can either scan a physical card with your iPhone's camera or enter the details manually. Your bank may send you a verification code by text — enter it when prompted.
If you use your watch to unlock your iPhone or Mac, you will need to set that up again too. On your iPhone, go to Settings > Face ID & Passcode (or Touch ID & Passcode on older models), scroll down to Use as Home Key or Unlock with Apple Watch, and follow the prompts. The watch will vibrate when the setup is complete.
Check that your health and fitness data synced correctly. Open the Health app on your iPhone and tap Browse at the bottom. You should see your step count, workouts, and other data from your watch. If the data is missing, open the Watch app, tap Privacy, and make sure Health is toggled on.
Troubleshoot if your watch will not pair or keeps disconnecting
If pairing fails or your watch keeps losing connection, the first step is to restart both devices. Press and hold the side button on your watch until the power menu appears, then slide to power off. Wait ten seconds, then press and hold the side button again to turn it back on. On your iPhone, hold the power button until the slider appears, then slide to power off. Wait ten seconds and turn it back on.
If restarting does not work, unpair the watch completely and try again. Make sure your iPhone is connected to a strong Wi-Fi signal — Bluetooth pairing works better when Wi-Fi is available. Move both devices away from other electronics like microwaves or cordless phones, which can interfere with Bluetooth.
If your watch still will not pair after two attempts, you may need to force a factory reset. On the watch, press and hold the side button until you see "Power Off," then keep holding until you see "Erase all content and settings." Confirm by pressing the digital crown. Once the watch restarts, try pairing again from the beginning.
Frequently Asked Questions
Do I need to unpair my watch from my old phone before pairing it with a new one?
Yes. If you do not unpair first, your watch may try to sync with both phones at once, which causes connection problems. Unpair through the Watch app on your old phone, or force a factory reset on the watch itself if you no longer have the old phone.
Will my watch data transfer to the new phone automatically?
Your watch data transfers if you sign in with the same Apple ID during setup and choose to restore from backup. If you set up as new, your watch will be blank and you will need to read your apps again through the Watch app on your iPhone.
What if my watch keeps disconnecting from my new iPhone?
Move both devices closer together and make sure your iPhone is connected to Wi-Fi. Restart both devices by powering them off and back on. If disconnections continue, unpair the watch and pair it again from the beginning — this usually fixes persistent connection issues.
Can I pair my watch with two iPhones at the same time?
No. An Apple Watch can only be paired with one iPhone at a time. If you switch between phones regularly, you will need to unpair from one and pair with the other each time you switch.
Why does my watch show a red Bluetooth icon in Control Center?
A red Bluetooth icon means your watch has lost connection to your iPhone. Move the devices closer together and wait a few seconds — the connection usually restores automatically. If it does not, restart both devices or unpair and pair again.