The two ways to connect: AirPlay and HDMI
You can connect an iPhone to an LG TV in two ways: wirelessly through AirPlay, or with a physical cable and adapter. AirPlay is faster to set up and works from across the room. The HDMI route requires a Lightning-to-HDMI adapter and a cable, but gives you a wired connection that cannot be interrupted by WiFi problems.
Both methods send your screen or video to the TV without storing anything on the TV itself. The TV acts as a display only — it does not save your passwords, photos, or browsing history. However, anyone in the room can see what is on your screen, so close sensitive apps before you start.
Key Takeaways
- AirPlay works only if your iPhone and LG TV are on the same WiFi network, and only on LG models made in 2019 or later.
- To use AirPlay, swipe down from the top-right corner of your iPhone, tap Control Center, then tap Screen Mirroring and select your TV.
- The HDMI adapter method works on any LG TV but requires you to buy a Lightning-to-HDMI adapter and an HDMI cable if you do not already own them.
- Your iPhone screen is visible to anyone in the room, so close banking apps, email, and messages before you connect.
- Disconnect from the TV when you are done by tapping Screen Mirroring again or unplugging the HDMI cable.
Setting up AirPlay on an LG TV
AirPlay is the easiest method if your LG TV supports it. Most LG TVs made in 2019 or later have AirPlay built in. Older models do not. Check your TV's manual or look in the settings menu under "AirPlay" to confirm your model works.
First, make sure your iPhone and TV are connected to the same WiFi network. Your iPhone must be on the same network the TV uses — if you have a guest network, that will not work. On your iPhone, swipe down from the top-right corner to open Control Center. Tap Screen Mirroring, then select your LG TV from the list. Your iPhone screen will appear on the TV within a few seconds.
If your TV does not appear in the list, restart both devices and try again. If it still does not show up, go to your LG TV's settings, find the AirPlay menu, and make sure AirPlay is turned on. Some LG models require you to enable it before your iPhone can see the TV.
Using an HDMI adapter if AirPlay is not an option
If your LG TV is older than 2019 or does not have AirPlay, you can use a wired connection instead. You will need a Lightning-to-HDMI adapter (made by Apple or a third-party manufacturer) and an HDMI cable. Plug the adapter into your iPhone's charging port, connect the HDMI cable to the adapter, then plug the other end of the cable into an HDMI port on your TV.
Switch your TV to the correct HDMI input using the remote. Your iPhone screen should appear on the TV automatically. If it does not, try unplugging the adapter and plugging it back in. Some older iPhones may require a restart before the connection works.
The HDMI method is reliable because it does not depend on WiFi. The downside is that your iPhone is tethered to the TV by a cable, so you cannot move around the room while connected. Also, your battery will drain faster because the adapter draws power from your phone.
What your TV can see and what it cannot
When you connect your iPhone to an LG TV, the TV displays whatever is on your screen — apps, videos, photos, web pages, everything. The TV does not store any of this information. Once you disconnect, nothing remains on the TV.
However, the TV can see your screen in real time while you are connected. If you have notifications from banking apps, email, or messages visible, anyone in the room can read them. Before you connect, close these apps or turn off notifications. You can also turn on Do Not Disturb to prevent notifications from appearing while you are mirroring.
Your WiFi password, Apple ID, or any other account information is not sent to the TV. The TV only receives the video signal of what you are displaying.
Disconnecting safely when you are done
To stop mirroring through AirPlay, swipe down to open Control Center again, tap Screen Mirroring, and tap your TV's name to disconnect. The connection will end when ready and your screen will no longer appear on the TV.
If you are using an HDMI adapter, straightforward unplug the cable from the TV or the adapter. Your iPhone will recognize the disconnection right away. You can then unplug the adapter from your phone's charging port.
After you disconnect, check that your iPhone is no longer displaying on the TV before you open sensitive apps like banking or email. Some apps may have cached information on screen, so a quick look at the TV will confirm nothing is still visible.
Troubleshooting common connection problems
If your iPhone does not appear on the TV after you plug in the HDMI adapter, try restarting your iPhone. Hold down the power button, slide to power off, wait 10 seconds, then power it back on. Plug the adapter in again and check if the TV recognizes the connection.
For AirPlay, if your TV does not show up in the Screen Mirroring menu, make sure both devices are on the same WiFi network. If you are on a 5GHz network and your TV only supports 2.4GHz, they will not connect. Check your router settings or ask your internet provider which frequency your network uses. You may need to switch to a network that both devices support.
If the picture is choppy or keeps cutting out during AirPlay, move your iPhone closer to the TV or router. Walls, microwaves, and other devices can interfere with WiFi signals. A wired HDMI connection will not have this problem.
Frequently Asked Questions
Can someone else connect to my TV without my permission?
With AirPlay, anyone on your WiFi network can see your TV in their Screen Mirroring menu and attempt to connect. Most LG TVs will show a notification asking you to allow or deny the connection, so you can reject unwanted attempts. With HDMI, only someone with physical access to the cable can connect.
Does connecting to the TV drain my iPhone battery faster?
AirPlay uses WiFi and drains battery at a normal rate. HDMI adapters draw power from your phone, so your battery will drain noticeably faster — usually 10 to 20 percent quicker depending on what you are displaying. If you plan a long session, plug your iPhone into power while connected.
Can I use my iPhone while it is connected to the TV?
Yes. Whatever you do on your iPhone will appear on the TV in real time. If you open a different app, switch to a different screen, or adjust the brightness, the TV will show those changes when ready. This is useful for presentations or showing photos, but remember that your screen is visible to everyone in the room.
What if my LG TV is very old and does not have HDMI ports?
Older LG TVs with only composite or component inputs cannot connect directly to an iPhone. You would need a specialized converter box that accepts HDMI input and outputs composite or component video, which is expensive and not commonly sold. In most cases, it is simpler to use a streaming device like an Apple TV or Roku instead.
Is it safe to leave my iPhone connected to the TV overnight?
It is safe, but not practical. Your battery will drain completely if you are using HDMI. With AirPlay, your phone will stay connected but use WiFi power continuously. If you want to display something on your TV for a long time, use a streaming device or connect a computer instead.