What a complete reset does and when you need it
A complete reset, called erasing all content and settings, removes everything from your Apple Watch — all apps, data, saved passwords, payment information, and customizations. The watch returns to the state it was in when it first shipped from Apple. You are left with a blank device that needs to be set up again from scratch.
You need a complete reset when you are selling or giving away the watch, when you are moving it to a different iPhone, or when the watch is behaving badly enough that removing everything is faster than troubleshooting. A reset also removes any traces of your personal information if you are concerned about data privacy before handing the device to someone else.
A reset is different from a restart or a force restart. Those actions turn the watch off and back on without erasing anything. A reset is permanent and cannot be undone — make sure you have backed up anything you want to keep before you start.
Key Takeaways
- A complete reset erases all apps, data, passwords, and settings from your watch and cannot be undone.
- You can reset the watch from the watch itself using the Settings app, or from the iPhone using the Watch app.
- The reset process takes a few minutes and the watch will restart automatically when it is finished.
- After a reset, you will need to pair the watch to your iPhone again and set it up as new or from a backup.
- If you are selling or giving away the watch, unpair it from your iPhone before you hand it over to remove your Apple ID.
How to reset from the Apple Watch itself
Open the Settings app on your watch by pressing the Digital Crown (the button on the side) and tapping the gear icon. Scroll down and tap General, then scroll down again and tap Reset. You will see two options: Erase All Content and Settings and Reset Network Settings. Tap Erase All Content and Settings.
The watch will ask you to confirm. It will show a warning that this action cannot be undone. Tap the red Erase All button to proceed. The watch will begin erasing and will show a progress screen. This usually takes two to five minutes. When it is finished, the watch will restart and show the setup screen, the same one you saw when you first turned it on.
If your watch is locked with a passcode, you will need to enter that passcode before the reset can begin. If you have forgotten the passcode, you will need to reset the watch from your iPhone instead, because the iPhone can bypass the passcode.
How to reset from your iPhone
Open the Watch app on your iPhone. Tap the All Watches tab at the bottom, then tap the watch you want to reset. Tap the information icon (the small circle with an "i") in the top right corner. Scroll down and tap Unpair Watch. The iPhone will ask you to confirm and will warn you that this will erase all content and settings on the watch.
If you have a backup of the watch, the iPhone will ask whether you want to keep it or delete it. Choose based on whether you think you will need to restore from that backup later. Tap Unpair to continue. The iPhone will disconnect from the watch and begin erasing it remotely. This takes a few minutes. When it is finished, the watch will show the setup screen.
Unpairing from the iPhone is the best method if you are giving the watch to someone else, because it also removes your Apple ID from the watch. If you only reset the watch without unpairing, your Apple ID will still be on it, and the new owner will not be able to set it up without your password.
What happens after the reset is complete
Your watch will restart and display the setup screen. It will ask you to choose a language and then to pair with an iPhone. You will need to have your iPhone nearby with Bluetooth turned on. Open the Watch app on your iPhone, tap Start Pairing, and hold your iPhone up to the watch while it scans the pairing code on the watch screen.
After pairing, the iPhone will ask whether you want to set up the watch as new or restore from a backup. If you choose to restore from a backup, the watch will read your apps, data, and settings from iCloud. If you choose to set up as new, you will start with a blank watch and add apps one at a time from the App Store.
The setup process takes ten to twenty minutes depending on how many apps you have and how fast your internet connection is. Your watch will need to stay connected to power during this time.
Resetting a watch that is stuck or not responding
If your watch is frozen and will not respond to taps or button presses, try a force restart first. This is different from a reset — it just turns the watch off and back on without erasing anything. Press and hold both the Digital Crown and the side button at the same time for about ten seconds. The watch will show the Apple logo and then restart. This often fixes temporary problems without losing your data.
If the force restart does not work and the watch is still stuck, you can still reset it from your iPhone using the Watch app. The iPhone does not need the watch to be responding — it can erase the watch remotely. This is useful when the watch screen is broken or the watch is completely unresponsive.
If the watch will not turn on at all, plug it into power for at least fifteen minutes. Sometimes a completely drained battery prevents the watch from responding. After charging, try the force restart again. If the watch still will not turn on, contact Apple Support, because the watch may have a hardware problem that a reset cannot fix.
Removing your Apple ID before giving away the watch
If you are selling or giving away your watch, you must remove your Apple ID before you hand it over. This prevents the new owner from being locked out by set up Lock, which requires your Apple ID password to set up the watch. Unpairing the watch from your iPhone (as described above) removes your Apple ID automatically.
To verify that your Apple ID has been removed, ask the new owner to try setting up the watch. If they see a screen asking for your Apple ID password, the watch was not properly unpaired. In that case, you will need to unpair it again from your iPhone, or contact Apple Support to remove your ID remotely.
If you no longer have access to your iPhone or your Apple ID password, contact Apple Support with proof of ownership. They can remove your Apple ID from the watch so the new owner can set it up. This process usually takes a few business days.
Frequently Asked Questions
Can I undo a reset after I have started it?
No. Once you tap the final confirmation button, the reset cannot be stopped or undone. The watch will erase all its data. If you change your mind before tapping the confirmation button, press the back button or the Digital Crown to cancel.
Will resetting the watch also reset my iPhone?
No. Resetting the watch only affects the watch. Your iPhone and all its data remain unchanged. However, the watch will be unpaired from your iPhone, so you will need to pair them again after setup.
Do I need to unpair the watch before I reset it?
You can reset without unpairing, but unpairing is better if you are giving the watch to someone else. Unpairing removes your Apple ID and prevents set up Lock. If you only reset, your Apple ID stays on the watch and the new owner cannot set it up without your password.
What if I forgot my watch passcode and cannot reset it?
Use your iPhone to unpair the watch instead. Open the Watch app, tap your watch, tap the information icon, and tap Unpair Watch. The iPhone can erase the watch remotely without needing the passcode. This also removes your Apple ID.
How long does a complete reset take?
The actual erasing process takes two to five minutes. After that, the watch restarts and shows the setup screen. The full setup process, including pairing with your iPhone and downloading apps, takes ten to twenty minutes depending on your internet speed and how many apps you have.