The basic steps for setting the time on most G-Shock models
Most G-Shock watches let you change the time by holding the Adjust button (usually on the lower left) for about three seconds until the display starts flashing. Once the time digits flash, use the up and down buttons (on the right side) to move through hours, minutes, and sometimes seconds. Press Adjust again to move to the next field. When all fields are set correctly, hold Adjust again until the display stops flashing and returns to normal timekeeping.
The exact button layout and sequence varies between G-Shock models — digital-only watches, analog-digital hybrids, and solar models all work slightly differently. If your watch has a manual, that's the fastest way to find your specific model's steps. If you don't have the manual, the model number is printed on the back of the watch case, and you can search for "[model number] time setting" to find instructions online.
One common mistake is pressing buttons too quickly or in the wrong order, which can cycle you past the time-setting mode into other functions like alarms or world time. If that happens, just hold Adjust until you exit the menu entirely, then start over.
Key Takeaways
- Hold the Adjust button for three seconds to enter time-setting mode; the display will start flashing when you're in the right menu.
- Use the up and down buttons to change hours and minutes, then press Adjust to move between fields.
- Your G-Shock model number is on the back of the case; search for it online if you need the exact sequence for your watch.
- If you accidentally enter a different menu, hold Adjust to exit and start the time-setting process again.
Digital-only G-Shock watches
Pure digital G-Shocks (like the DW-5600 or F-91W) have the simplest time-setting process. Hold Adjust until the hour digits flash, use the up button to increase the hour, then press Adjust to move to minutes. Use up again to set minutes, then press Adjust one more time to confirm and exit. The watch will beep once when you've saved the time.
These models usually don't let you set seconds through the normal menu — the seconds reset to 00 automatically when you exit time-setting mode. If you need the seconds to align exactly with a reference time, set the time a few seconds early, then press Start/Stop (the top-right button) to freeze the seconds at 00, and release it when your reference time hits that mark.
Analog-digital G-Shock watches
G-Shocks with both an analog dial and a digital display (like the GA-100 or AW-90) require you to set both the digital time and the analog hands. Start with the digital time using the same Adjust-and-buttons method as a digital-only watch. Once the digital time is correct, the analog hands should move automatically to match — but if they don't, you may need to enter a separate "hand adjustment" mode.
To adjust the analog hands manually, hold the Adjust button longer (usually five to seven seconds) until you see a different display indicator, then use the up and down buttons to move the hour and minute hands. This is less common on newer models, but it's worth checking your manual if the hands don't sync after you set the digital time.
Solar and atomic-syncing G-Shock watches
Solar G-Shocks and models with atomic time reception (like the GW-M5610 or GW-9400) can set themselves automatically if they receive a radio signal or get enough sunlight. However, you may still need to set the time manually if the watch is new, the battery is very low, or you're in an area without radio signal coverage.
The manual time-setting process is the same as other G-Shocks, but after you set it, the watch will try to sync with an atomic clock signal within the next few hours. If you see a small radio or satellite icon on the display, the watch is attempting to sync. Don't be alarmed if the time jumps by a minute or two once it receives the signal — that's the watch correcting itself to the official time.
What to do if the buttons aren't responding
If pressing Adjust doesn't enter time-setting mode, the watch may be in a different menu or the button may be stuck. Try pressing Adjust five or six times in a row to cycle through all menus and return to the main timekeeping display, then try again. If the button feels physically stuck or doesn't click, gently tap the side of the watch case near the button to dislodge any debris.
If the display is completely dark or unresponsive, the battery may be dead. G-Shock batteries typically last five to ten years depending on the model and how often you use the backlight. You can replace the battery yourself with a small screwdriver and a new CR2032 or similar coin-cell battery (check your manual for the exact type), or take the watch to a jeweler or G-Shock service center.
Keeping your time accurate between adjustments
G-Shock quartz movements are generally accurate to within 15 to 20 seconds per month, which means you may need to adjust the time every few months if you want it perfectly synchronized. If you notice your watch is consistently fast or slow, you can't adjust the rate itself — quartz watches don't have a mechanical adjustment like mechanical watches do. Your only option is to reset the time when it drifts noticeably.
If you have a solar or atomic-syncing model, make sure it gets regular sunlight (for solar) or is in range of a radio transmitter (for atomic models) so it can correct itself automatically. Solar G-Shocks need at least a few hours of indirect sunlight per week to stay charged and synced; atomic models need to be in range of an NIST radio transmitter, which covers most of North America and parts of Europe and Asia.
Frequently Asked Questions
What if I don't know my G-Shock model number?
The model number is printed on the back of the watch case, usually near the bottom. It's a combination of letters and numbers like DW-5600 or GA-100. Once you have it, search "[model number] manual PDF" to find the official instructions, which will show you the exact button sequence for your watch.
Can I set the time on a G-Shock without the manual?
Yes. The basic process — hold Adjust, use up and down buttons, press Adjust to move between fields — works on most models. If that doesn't work, try holding Adjust for longer (five to seven seconds) or pressing it multiple times to cycle through menus. The worst that happens is you enter a different menu and have to hold Adjust to exit.
Why does my G-Shock time keep changing after I set it?
If you have a solar or atomic-syncing model, the watch may be correcting itself to an official time signal. Check your manual to see if your model has this feature. If it's a regular quartz G-Shock, the time shouldn't change on its own — if it does, the battery may be dying or the watch may have been reset accidentally.
Do I need to remove the watch to change the time?
No. You can change the time while wearing the watch. The buttons are designed to be pressed with your thumb or a fingernail, and you don't need to take the watch off or use any tools.