The quickest way to change your iPhone's time

Open Settings, tap General, then Date & Time. Toggle off Set Automatically if it is on. Tap the time display and use the wheels to set the hour, minute, and AM or PM. When you finish, tap Back to save.

Most iPhones have Set Automatically turned on by default, which means your phone pulls the correct time from your carrier or Wi-Fi network. If you need to change the time manually — because you are traveling, your phone is showing the wrong time, or you need to test something — you have to turn off that automatic setting first.

The process takes about 30 seconds. Your iPhone will keep the time you set until you turn automatic time back on or manually change it again.

Key Takeaways

  • Go to Settings > General > Date & Time and turn off Set Automatically before you can change the time manually.
  • The time picker uses spinning wheels for hours, minutes, and AM or PM — swipe up or down on each wheel to change the number.
  • Turning off automatic time means your phone will not update when you cross time zones, so turn it back on when you are done testing.
  • If your iPhone shows the wrong time even with automatic time on, restart your phone or check that you are connected to Wi-Fi or cellular service.

Why your iPhone might show the wrong time

If Set Automatically is on and your phone still shows the wrong time, the problem is usually a connection issue. Your iPhone needs either a cellular signal or a Wi-Fi connection to pull the correct time from the network. If you are in airplane mode, offline, or in an area with no signal, your phone cannot update.

Restarting your iPhone often fixes this. Hold the side button and one of the volume buttons until the power-off slider appears, then slide to power off. Wait 10 seconds, then hold the side button again until the Apple logo shows. Once your phone restarts and reconnects to the network, it should fetch the correct time automatically.

If restarting does not work, check that you are connected to Wi-Fi or have cellular service. You can see your connection status in the top-right corner of your screen — look for the Wi-Fi symbol or signal bars.

Changing the time zone without changing the actual time

If you only need to change your time zone — for example, because you traveled and your phone did not update — go to Settings > General > Date & Time and look for Time Zone. Tap it and type the name of your city or region. Your iPhone will adjust the displayed time to match that zone automatically.

You do not need to turn off Set Automatically to change your time zone. The automatic setting keeps your phone synced to the network time, and the time zone setting just tells your phone how to display that time. If you leave Set Automatically on and change your time zone, your phone will show the correct local time for wherever you are.

When to turn off automatic time and why

You might need to turn off Set Automatically if you are testing an app that depends on the time, troubleshooting a time-related problem, or deliberately setting your phone to a different time for privacy or testing reasons. Once you turn it off, your iPhone will keep whatever time you set until you manually change it again or turn automatic time back on.

Be aware that turning off automatic time can cause problems with apps, notifications, and security features that depend on the correct time. Some apps may not work properly, and features like two-factor authentication might fail if your phone's time is too far off from the actual time. Turn automatic time back on as soon as you finish what you need to do.

How to turn automatic time back on

Go back to Settings > General > Date & Time and toggle Set Automatically back on. Your iPhone will reconnect to the network and pull the correct time. This usually happens within a few seconds, but if your phone is offline, it will update the next time it connects to Wi-Fi or cellular service.

If you changed your time zone manually while automatic time was off, your phone may not update the zone automatically when you turn the setting back on. Check the Time Zone field to make sure it shows your current location. If it does not, tap it and search for your city again.

Changing the time format from 12-hour to 24-hour

If you want to change how your iPhone displays the time — for example, from 3:45 PM to 15:45 — that is a different setting. Go to Settings > General > Date & Time and look for 24-Hour Time. Toggle it on to see time in 24-hour format throughout your phone, or toggle it off to use 12-hour format with AM and PM.

This setting does not change the actual time on your phone — it only changes how the time is displayed. Your iPhone will still be set to the correct time; it will just show it differently in the clock app, notifications, and other places where the time appears.

Frequently Asked Questions

Will changing the time affect my alarms or reminders?

Yes. If you set your phone to a time that is earlier than when you set an alarm, that alarm may go off when ready or not at all. If you set your phone to a later time, alarms scheduled for times you have already passed will not trigger. Always turn automatic time back on after testing to avoid missing alarms.

What happens if I change the time while automatic time is on?

You cannot change the time while Set Automatically is on. The setting is grayed out and you cannot tap it. You must toggle off Set Automatically first, then the time picker becomes available.

Can I set a different time for different apps?

No. The time setting on your iPhone is system-wide — all apps see the same time. If you change your phone's time, every app on your phone will see that changed time.

Why does my iPhone keep changing the time back?

If Set Automatically is on, your phone will override any manual time change and pull the correct time from the network. Check that you turned off Set Automatically before changing the time. If the toggle is on, turn it off first.