The basic steps for most G-Shock models
Most G-Shock watches change the time through a combination of button presses in the timekeeping mode. Press the Mode button (usually on the lower left) repeatedly until you see the time display with no other function active. Then hold the Adjust button (usually on the lower right) for about three seconds until the hour digits start flashing. Use the Plus button (upper right) to increase the hour, then press Adjust again to move to minutes, and repeat the process.
The exact button layout and names vary by model — some G-Shocks call it the "Set" button instead of Adjust, and the position of buttons changes between digital, analog, and hybrid models. Your watch manual will show the correct button sequence for your specific model, and that manual is usually available as a PDF on Casio's website if you search for your model number.
If your G-Shock has both an analog hand and a digital display, you may need to adjust the analog hand separately after setting the digital time. Some models do this automatically; others require a second adjustment sequence. Check your manual to see whether your model handles this in one step or two.
Key Takeaways
- Most G-Shock models use the Mode button to enter timekeeping mode, then the Adjust button to start editing the hour and minute fields.
- The Plus button increases the numbers; you move between hour and minute fields by pressing Adjust again.
- Hybrid watches with both analog hands and digital displays may require a separate step to sync the analog hand to the new time.
- Your specific model's manual shows the exact button sequence, and Casio publishes these manuals as free PDFs on their support site.
Finding your model number and manual
Your G-Shock model number is printed on the case back — it usually starts with letters like DW, GA, GD, or GW followed by numbers. Write down the full code exactly as printed. Go to Casio's official support site, search for your model number, and read the PDF manual. The manual includes a diagram showing which button is which on your specific watch, because button positions differ significantly between models.
If you cannot find the manual online, you can also contact Casio's customer service directly with your model number and they will send you the instructions. This is worth doing if your watch is older or if you have a regional variant that is not listed on the main Casio site.
Adjusting the time on analog G-Shock models
Analog G-Shocks (watches with moving hands) use a different process because you are setting the position of physical hands rather than digital numbers. You still enter the time-setting mode through the Mode button, but instead of pressing Plus to increment numbers, you hold the Plus button to rotate the hands forward. The hour hand and minute hand move together, so you need to get both to the correct position in one continuous motion.
Some analog models let you adjust the hour and minute hands separately; others move them together. Your manual will specify which type you have. If your model has separate adjustment, you will press Adjust to switch between hour-hand mode and minute-hand mode, just as you would with a digital display.
Syncing a hybrid watch with both hands and digital display
Hybrid G-Shocks show the time both as moving hands and as digital numbers. When you change the time, both need to match. Most hybrid models automatically move the hands to match the new digital time you set, but some require you to manually adjust the hands afterward. Your manual will show whether your model does this automatically or whether you need a second adjustment step.
If the hands do not move automatically after you set the digital time, look for a separate "hand adjustment" or "hand sync" mode in your manual. This is usually a different Mode sequence that lets you position the hands without changing the digital time. Once both are correct, exit the adjustment mode and the watch will hold both settings together.
What to do if buttons are not responding
If pressing the buttons does not enter adjustment mode, the watch may be in a different mode or the buttons may need a harder press. Try holding the Mode button for a full three seconds rather than tapping it — some models require a longer press to cycle through modes. If the watch is in alarm mode or stopwatch mode, you need to return to timekeeping mode first before time adjustment will work.
If buttons still do not respond, the watch may have a hold or lock feature enabled. Some G-Shocks have a physical lock switch or a digital lock mode that disables all buttons except one. Check your manual for a "hold" or "lock" section. If your watch is very old or has been stored for a long time, the battery may be low enough that the buttons do not register — try replacing the battery and trying again.
Setting the correct time zone and daylight saving
Many G-Shock models let you set a time zone offset so the watch automatically shows the correct local time. This is different from manually changing the hour — it stores an offset that applies whenever you travel. Look in your manual for "World Time" or "Time Zone" mode. You enter this mode the same way (Mode button), but instead of adjusting hours and minutes, you select your time zone from a list.
If your model does not have a time zone feature, you will need to manually adjust the time whenever you travel or when daylight saving time begins and ends. Some newer G-Shocks can receive time signals from atomic clocks and update automatically, but this feature is only available on certain models and only in certain regions. Your manual will specify whether your watch has this capability.
Frequently Asked Questions
How do I know if I am in the right mode to change the time?
When you are in time-setting mode, the hour or minute digits will flash on the display. If nothing is flashing, you are not in the adjustment mode yet. Keep pressing Mode until you see the flashing digits, then press Adjust to start editing.
Can I change just the minutes without changing the hour?
Yes. Once you are in time-setting mode and the hour is flashing, press Adjust to move to the minutes field. The hour will stop flashing and the minutes will start flashing. Now you can use Plus to change only the minutes. Press Adjust again to exit.
What if the analog hands are in the wrong position after I set the digital time?
On hybrid models, check your manual for a hand-adjustment mode. This is usually a separate Mode sequence that lets you position the hands without changing the digital time. If your model does not have this, the hands may need to be physically moved by a technician, or you may need to replace the movement.
Do I need to remove the watch to change the time?
No. You can change the time while wearing the watch. The buttons are designed to be pressed while the watch is on your wrist, though some people find it easier to remove the watch and set it on a flat surface so they can see the display clearly while pressing buttons.
Will changing the time drain the battery?
No. Changing the time uses the same amount of power as any other button press and will not noticeably affect battery life. G-Shock batteries typically last several years regardless of how often you adjust the time.