The fastest way to disable your touchscreen
The quickest method is to turn off the touchscreen driver in Device Manager, which takes about two minutes and does not require restarting. On Windows, press Windows key + X, then select Device Manager. Find Mice and other pointing devices, look for an entry that says Touchscreen or Touch input device, right-click it, and select Disable device. Your touchscreen stops working when ready.
On a Mac, there is no built-in touchscreen on most models, so this applies only if you have an external touch display. For external devices, go to System Settings > Bluetooth & Devices, find the device, and click the three dots next to it, then Disconnect. The touchscreen will not respond until you reconnect it.
This method is temporary — the driver stays installed, so you can re-enable it the same way whenever you need it. If you cannot find a touchscreen entry in Device Manager, your laptop may not have a built-in touchscreen, or the driver may be hidden under a different name like HID-compliant touch screen.
Key Takeaways
- Disabling the touchscreen in Device Manager stops it from working without removing the driver, so you can turn it back on later.
- On Windows, right-click the touchscreen device in Device Manager and select Disable device — no restart needed.
- If you cannot find the touchscreen in Device Manager, search for HID-compliant touch screen or check your laptop manufacturer's support page for the exact driver name.
- Disabling the touchscreen does not affect your keyboard, trackpad, or mouse.
- If you need the touchscreen off permanently, you can uninstall the driver instead, though you will need to reinstall it later if you change your mind.
Finding the touchscreen driver if it has an unfamiliar name
Some laptop manufacturers use different names for the touchscreen driver, which makes it hard to spot in Device Manager. If you do not see an entry labeled Touchscreen, expand the Human Interface Devices category instead. Look for anything with Touch in the name, or entries that say HID-compliant touch screen.
If you still cannot find it, check your laptop manufacturer's support website. Search for your exact model number (usually on a sticker on the bottom of the laptop) plus the word touchscreen driver. The support page will tell you the real name of the driver and confirm whether your model actually has a touchscreen. Some laptops advertise touch capability but do not include it in the base model.
Another way to confirm you have a touchscreen is to try touching the display. If nothing happens when you tap it, the touchscreen may already be disabled, or your laptop may not have one. You can also open Settings > Bluetooth & Devices > Touch on Windows 11 to see if touch is listed as available.
Why you might want to disable the touchscreen temporarily
Touchscreens on laptops can be annoying when you are typing or using the trackpad, because your palm or wrist sometimes brushes the screen and triggers unwanted clicks or scrolling. Disabling it while you work and re-enabling it later is a practical solution that does not require hardware changes.
You might also disable the touchscreen if you are troubleshooting a problem — for example, if the screen is responding to touches you did not make, or if a program is crashing when you use touch. Turning off the driver tells you whether the problem is with the hardware or with software.
Parents sometimes disable the touchscreen on a child's laptop to prevent accidental taps during schoolwork, then re-enable it later for other tasks. This is simpler than physically covering the screen or buying a separate non-touch display.
Re-enabling the touchscreen when you need it again
To turn the touchscreen back on, open Device Manager again, find the touchscreen driver, right-click it, and select Enable device. It will be active within a few seconds. You do not need to restart the laptop.
If the touchscreen does not respond after you enable it, restart the laptop once. Occasionally the driver needs a full restart to initialize properly, especially if it was disabled for a long time.
Uninstalling the driver instead of disabling it
If you want the touchscreen off for a longer period, you can uninstall the driver entirely instead of just disabling it. Right-click the touchscreen in Device Manager and select Uninstall device. Check the box that says Delete the driver software for this device if you want to remove it completely.
The downside is that reinstalling the driver later is more work — you will need to read it from your manufacturer's website and run the installer. Disabling is usually the better choice unless you are certain you will not need the touchscreen again.
If you uninstall and then change your mind, go to Device Manager, click View at the top, and select Show hidden devices. Look for any grayed-out touchscreen entries, right-click them, and select Uninstall device to clean them up. Then restart your laptop and Windows will detect the hardware again and prompt you to reinstall the driver.
Troubleshooting if the touchscreen will not disable
If you right-click the touchscreen and the Disable device option is grayed out, the driver may be locked by Windows or by your system administrator. This sometimes happens on work laptops where IT has restricted changes to hardware settings.
Try opening Device Manager as administrator. Press Windows key + X, select Device Manager, and if a prompt appears asking for permission, click Yes. Then try disabling the device again.
If it is still grayed out, your laptop may have a BIOS setting that controls the touchscreen. Restart your laptop and watch for a message during startup that says something like Press F2 to enter Setup or Press Del for BIOS. The exact key varies by manufacturer. Once in BIOS, look for a setting called Integrated Peripherals, Onboard Devices, or Touch Screen, and disable it there. Save and exit. This is a more permanent change than disabling in Device Manager, so only do this if you are comfortable with BIOS settings.
Frequently Asked Questions
Will disabling the touchscreen affect my trackpad or mouse?
No. The touchscreen and trackpad are separate devices with separate drivers. Disabling one does not touch the other. Your keyboard, mouse, and trackpad will work normally.
Do I need to restart my laptop after disabling the touchscreen?
No. Disabling the driver in Device Manager takes effect when ready. You only need to restart if the touchscreen does not respond after you re-enable it later.
What if my touchscreen driver is not showing up in Device Manager at all?
Your laptop may not have a built-in touchscreen, or the driver may be hidden. Check your laptop's original specifications on the manufacturer's website. If it should have a touchscreen, try opening Device Manager, clicking View, and selecting Show hidden devices to reveal drivers that are not currently active.
Can I disable the touchscreen from Windows Settings instead of Device Manager?
Windows Settings has a touch option, but it usually only lets you turn touch on or off globally, not disable the specific hardware. Device Manager gives you more control and is the more reliable method. On Windows 11, you can try Settings > Bluetooth & Devices > Touch, but if that does not work, Device Manager is your next step.
Is it safe to uninstall the touchscreen driver?
Yes, it is safe. Uninstalling a driver does not damage the hardware. You can reinstall it anytime by downloading it from your manufacturer's support page or letting Windows find it automatically after a restart.