The most common reason AirPods disconnect is that Bluetooth on your device turned off, or your AirPods fell out of pairing range
AirPods stop connecting for a handful of predictable reasons, and most of them take under a minute to fix. The issue is almost never the AirPods themselves — it is almost always your phone, tablet, or computer losing the Bluetooth signal, or the pairing getting confused after an update or a restart. This guide walks you through the fixes in order, starting with the fastest ones.
Before you start: make sure your AirPods have battery. Put them in the case and look at the light on the front. A green light means they are charged. An amber light means they are charging. No light means the case is dead. If the case is dead, plug it in for 15 minutes before trying anything else.
Key Takeaways
- Check that Bluetooth is actually turned on in your device's settings — it often turns off after an update or restart without you noticing.
- Forget the AirPods from your device's Bluetooth menu, then hold the setup button on the back of the case for 15 seconds to reset them and pair again.
- If you have multiple Apple devices, AirPods may be trying to connect to the wrong one — manually select them in Bluetooth settings on the device you want to use.
- Restarting both your AirPods and your device fixes most connection problems that do not respond to the steps above.
Check that Bluetooth is actually on
This sounds obvious, but Bluetooth turns itself off after a software update or a device restart, and most people do not notice. Open your device's settings and look for Bluetooth. On iPhone and iPad, it is in Settings > Bluetooth. On Mac, it is in System Settings > Bluetooth. On Android, it is in Settings > Connected devices > Bluetooth or Settings > Bluetooth (the exact path varies by phone maker).
If the toggle is off, turn it on. Wait 10 seconds, then look at your AirPods case. If you see a white light flashing on the front, your AirPods are looking for a device to connect to — this is normal. If the light is off or amber, your AirPods are either charging or already connected to something else.
Make sure your AirPods are not connected to a different device
AirPods remember every device they have ever paired with. If you have an iPhone, a Mac, and an iPad, your AirPods will try to connect to whichever one they were last used with. If you want them on your phone but they keep connecting to your laptop, you need to tell them which device to use.
Open Bluetooth settings on the device you want to use. Find your AirPods in the list of paired devices. On iPhone and iPad, tap the info icon (a circle with an "i") next to your AirPods name. On Mac, click the options button next to your AirPods. Look for a setting that says "Connect to this iPhone" or "Connect to this Mac" and select it. Your AirPods should connect within a few seconds.
If you have Android, the process is simpler: open Bluetooth settings, find your AirPods, and tap them. They will connect to that phone. AirPods work with Android, but they do not switch between Android and Apple devices the way they switch between iPhones and Macs.
Forget and re-pair your AirPods
If Bluetooth is on and your AirPods are not connecting to anything, the pairing itself may be corrupted. The fastest fix is to delete the pairing and start over. This takes about two minutes.
First, open Bluetooth settings on your device and find your AirPods in the list. On iPhone and iPad, tap the info icon next to them and select "Forget This Device". On Mac, click the options button and select "Remove". On Android, tap the settings icon next to your AirPods and select "Forget" or "Unpair".
Now reset your AirPods. Put them in the case and close the lid. Wait 30 seconds. Open the case and look at the light on the front. Hold down the small button on the back of the case — not the button on the AirPods themselves, but the one on the case itself — for 15 seconds. The light will flash amber, then white. When it turns white and keeps flashing, your AirPods are in pairing mode and ready to connect to a new device.
Go back to Bluetooth settings on your device. You should see your AirPods appear in the list as a new device. Tap or click them to pair. Your device may ask you to confirm — select "Connect" or "Pair". Your AirPods should connect within 10 seconds.
Restart your AirPods and your device
If forgetting and re-pairing did not work, restart both your AirPods and your device. This clears temporary glitches that sometimes prevent connection.
To restart your AirPods, put them in the case and close the lid. Leave them closed for 30 seconds. Open the case. They should turn back on automatically. If they do not, open Bluetooth settings and look for them in the list — they may be there but not connected yet.
To restart your device, use the normal shutdown process. On iPhone, hold the power button and either volume button until the power-off slider appears, then drag it. On Mac, click the Apple menu and select "Shut Down". On Android, hold the power button until a menu appears and select "Power off". Wait 30 seconds, then turn it back on. Once your device is fully restarted, open Bluetooth settings and look for your AirPods.
Check for software updates on your device
Connection problems sometimes happen right after your device gets a software update. Apple and other manufacturers release small updates to fix Bluetooth bugs, so checking for updates can solve the problem.
On iPhone and iPad, go to Settings > General > Software Update. On Mac, go to System Settings > General > Software Update. On Android, go to Settings > About phone > System update (the exact path varies). If an update is available, install it and restart your device. Then try connecting your AirPods again.
Try connecting to a different device to test your AirPods
If your AirPods will not connect to your phone but you have access to another device — a friend's phone, a tablet, a computer — try pairing them there. If they connect to the other device without trouble, the problem is with your phone's Bluetooth, not your AirPods. If they will not connect to any device, your AirPods may have a hardware problem.
If the problem is your phone's Bluetooth, try the steps above again, paying special attention to the forget-and-re-pair step. If your AirPods will not connect to any device, contact Apple Support — your AirPods may need service.
Frequently Asked Questions
Why do my AirPods keep disconnecting after they connect?
This usually means your device's Bluetooth is turning off on its own, or your AirPods are moving out of range. Bluetooth works best within about 30 feet of your device. If you are farther away, the connection drops. Move closer and see if it reconnects. If disconnections happen even when you are close, try forgetting and re-pairing your AirPods.
Can I use AirPods with Android phones?
Yes. AirPods work with any device that has Bluetooth, including Android phones. They will not have all the same features as they do with iPhones — for example, you cannot use Siri or automatic ear detection — but they will play audio and take calls. Pair them the same way you would pair any Bluetooth headphones.
What does the white flashing light on my AirPods case mean?
A white flashing light means your AirPods are in pairing mode and looking for a device to connect to. This happens when you first set them up or when you reset them by holding the button on the back of the case. Once they connect to a device, the light stops flashing.
Do I need to re-pair my AirPods every time I use them?
No. Once you pair your AirPods with a device, they stay paired. The next time you turn on your AirPods and that device has Bluetooth on, they should connect automatically. You only need to re-pair if you forget them from your device's Bluetooth settings or if the pairing gets corrupted.
Why won't my AirPods connect even though they are charged?
Battery is not the issue — a dead AirPod will still pair and connect, it just will not produce sound. If your AirPods are charged but will not connect, try forgetting them and re-pairing, restarting your device, or testing them on a different device to see if the problem is with your AirPods or your phone's Bluetooth.