The basic steps to disconnect and reconnect your watch

To move your Apple Watch to a new phone, you need to unpair it from the old one first, then pair it fresh to the new device. The unpair process erases everything on the watch — all your apps, settings, and data — so the watch starts clean when you connect it to the new phone. This happens automatically; you do not need to manually delete anything.

The entire process takes about 15 to 30 minutes depending on your internet speed and how much data is syncing. You will need both phones present for the unpair step, but only the new phone for the pairing step. Have your Apple ID password ready before you start, because you will need it during the new pairing.

Key Takeaways

  • Unpairing your watch from your old phone erases all data on the watch automatically — you do not need to delete anything manually.
  • You must have both the old phone and the watch in the same room to unpair them, but you can pair the watch to the new phone anywhere.
  • The new phone must be running watchOS-compatible software (generally the current or previous two versions of iOS).
  • After unpairing, your watch will restart and show the pairing screen, which means it is ready to connect to the new phone.

How to unpair the watch from your old phone

Open the Watch app on your old iPhone. Tap the My Watch tab at the bottom of the screen, then tap All Watches at the top. Find your watch in the list, tap the information icon (a small circle with an "i" inside), and select Unpair Apple Watch. The system will ask you to confirm; tap Unpair again.

Your Apple ID password will be required at this point. Enter it when prompted. The watch will then begin erasing itself — you will see a progress screen on both the phone and the watch. This takes a few minutes. Once it finishes, the watch will restart and display the pairing screen (a large, colorful geometric pattern). This means the unpair was successful and the watch is ready for the new phone.

If you no longer have access to the old phone, you can unpair remotely using iCloud.com. Sign in with your Apple ID, go to Find My, select your watch from the device list, and choose Remove from Account. This does the same thing as unpairing through the Watch app, but it does not erase the watch — you will need to erase it manually before pairing to the new phone.

What to do if you cannot access the old phone

If the old phone is lost, broken, or you do not have it with you, you have two options. The first is to use iCloud.com to remove the watch from your account (as described above), then erase the watch manually. To erase it, hold down the side button on the watch until the power-off slider appears, swipe it to turn off the watch, then hold the side button again until you see the setup screen.

The second option is to pair the watch directly to the new phone without unpairing first. During the pairing process, the new phone will detect that the watch is already paired to another account and will offer to unpair it automatically. Choose that option, and the new phone will handle the unpair and erase for you. This is often the fastest route if you have already switched to the new phone.

Pairing the watch to your new phone

Make sure your new iPhone is unlocked and nearby. On the watch, you should see the pairing screen (the colorful geometric pattern). If you do not see it, restart the watch by holding the side button until the power-off slider appears, swipe to power off, then hold the side button again until the Apple logo appears.

Open the Watch app on the new iPhone and tap Start Pairing. Hold the iPhone camera up to the watch face — the camera will scan the pattern on the watch screen. Once the scan is complete, the iPhone will ask you to sign in with your Apple ID. Enter your credentials and choose whether to restore from a backup or set up as new. If you have a recent backup of your watch, restoring will put all your apps and settings back on the watch. If you set up as new, the watch will be blank and you can add apps one at a time.

The pairing process will then begin. You will see progress screens on both devices. The watch will restart a few times — this is normal. The entire process usually takes 5 to 15 minutes. Once it finishes, you will see a checkmark on the iPhone and the watch will show your watch face. At this point, the pairing is complete.

Restoring your apps and data to the new pairing

If you chose to restore from backup during pairing, your apps, watch faces, and settings will return automatically over the next few minutes. Some apps may take longer to sync if they are large or if your internet connection is slow. You can check the progress in the Watch app under My Watch > General > About.

If you set up as new, you will need to add apps manually. Open the Watch app on the iPhone, go to Available Apps, and tap the plus sign next to each app you want to install. Apps will read and install to the watch in the background. This can take anywhere from a few minutes to an hour depending on how many apps you are installing and your internet speed.

Some apps (like banking apps or fitness trackers) may ask you to sign in again on the watch. This is normal security behavior — the watch does not store passwords, so each app needs you to authenticate fresh. Have your passwords ready or use your phone to sign in if the watch app offers that option.

Troubleshooting common pairing problems

If the pairing fails partway through, the most common cause is a weak or unstable internet connection. Make sure both the iPhone and watch are on the same Wi-Fi network (or that the iPhone has cellular service). Restart both devices and try again. If the watch gets stuck on a progress screen, hold the side button to restart it, then start the pairing process over from the Watch app.

If the camera scan does not work, make sure the watch screen is clean and the room has good lighting. Hold the iPhone steady about 6 inches from the watch face. If the scan still fails, you can skip it by tapping Pair Apple Watch Manually at the bottom of the pairing screen — this will let you enter your watch information by hand instead.

If you see an error saying the watch is already paired to another account, it means the unpair did not complete. Go back to the old phone (or use iCloud.com) and unpair again, making sure you see the pairing screen on the watch before you try to pair to the new phone. If the old phone is truly inaccessible, use the iCloud.com method to remove the watch from your account, then erase the watch manually as described in the section above.

Frequently Asked Questions

Will I lose all my data when I unpair the watch?

Yes, unpairing erases everything on the watch. However, your health and fitness data is stored in iCloud and will sync back to the watch when you pair it to the new phone and restore from backup. Your activity history, workouts, and health readings are safe.

Can I pair the watch to the new phone before unpairing from the old one?

No, a watch can only be paired to one phone at a time. If you try to pair to the new phone while it is still paired to the old one, the new phone will offer to unpair it for you automatically. This is actually the fastest method if you have already switched phones.

How long does the whole process take?

Unpairing takes 5 to 10 minutes. Pairing to the new phone takes 10 to 20 minutes. Restoring apps and data can take another 10 to 30 minutes depending on how many apps you have and your internet speed. Plan for about an hour total if you are restoring from backup.

What if my new phone is a different brand, like Android?

Apple Watch only works with iPhones. If you are switching to Android, the watch will not pair to the new phone. You would need to switch to a different smartwatch designed for Android, such as a Wear OS watch or a Samsung Galaxy Watch.

Do I need to unpair before selling my old phone?

Yes, you should unpair the watch before you sell or give away the old phone. Unpairing removes the watch from your Apple ID account on that phone, so the new owner cannot access your data. If you forget to unpair, you can remove it remotely using iCloud.com before handing over the phone.