The basic process: unpair, then pair again
Transferring an Apple Watch to a new iPhone means unpairing it from your old phone first, then pairing it fresh to the new one. The watch itself stays the same — you are just changing which phone it talks to. Apple Watch does not transfer like photos or contacts do; the pairing is a direct connection between two specific devices, so breaking that connection and making a new one is the only way forward.
The entire process takes about 15 to 30 minutes if your internet connection is stable. Most of that time is the watch backing up its data, sending it to iCloud, and then restoring it on the new pairing. You will need both phones present for the unpair step, but only the new phone for the pairing step.
Start with your old iPhone still in hand. You will need it to confirm the unpair action, because Apple requires you to enter your Apple ID password on the old phone before the watch will let go.
Key Takeaways
- Unpairing your Apple Watch from your old iPhone requires you to have that old phone present and to enter your Apple ID password on it.
- The watch backs up automatically to iCloud during the unpair process, so your data (activity rings, health records, app settings) transfers to the new pairing without extra steps.
- After unpairing, you pair the watch to your new iPhone by holding them close together and following the on-screen prompts, which takes about 10 minutes.
- If you no longer have access to your old iPhone, you can unpair remotely through iCloud.com, but this erases the watch's backup and you will lose recent data.
Unpairing from your old iPhone
Open the Watch app on your old iPhone. Tap the My Watch tab at the bottom, then tap All Watches at the top left. Find your watch in the list and tap the information icon (the small circle with an i) next to its name.
Scroll down and tap Unpair Apple Watch. You will see a warning that this will erase the watch and back up its data to iCloud. Tap Unpair again to confirm. The system will ask for your Apple ID password — this is the password for the Apple ID that the watch is paired to, not necessarily the password for the iPhone itself. Enter it and wait.
The unpair process takes 2 to 5 minutes. During this time, the watch is backing up everything — your activity data, health records, app settings, and any downloaded apps. Do not interrupt this step. When it finishes, the watch will show the Apple logo and then a setup screen, which means it is ready to pair to a new phone.
If you do not have your old iPhone anymore
If your old phone is lost, broken, or no longer in your possession, you can unpair remotely through iCloud. Go to iCloud.com on any web browser and sign in with the Apple ID that the watch is paired to. Click Find My, then select Devices, and find your Apple Watch in the list.
Click the information icon next to the watch name, then click Remove. This unpairs the watch from your account and erases it completely. The watch will reset to factory settings, and you will lose any data that was not already backed up to iCloud before the phone was lost.
This remote unpair is slower and more destructive than unpairing with the old phone present, so use it only when you have no other choice. After the remote unpair completes, your watch is ready to pair to the new iPhone.
Pairing to your new iPhone
On your new iPhone, open the Watch app and tap Start Pairing. Hold the watch close to the iPhone — within a few inches — and wait for the pairing screen to appear on both devices. The watch will show a moving animation; the iPhone will show a camera viewfinder. Position the watch so the animation is centered in the iPhone's viewfinder, just like you are taking a photo of the watch face.
Once the iPhone recognizes the watch, it will ask which wrist you wear it on (left or right) and whether you want to set it up as a new watch or restore from a backup. Choose Restore from Backup. The system will show you backups available on your iCloud account — select the most recent one, which should be the backup created when you unaired from your old phone.
Enter your Apple ID password when prompted. The iPhone will then read the backup and send it to the watch. This step takes 5 to 15 minutes depending on how much data is in the backup and how fast your internet is. Keep the watch and iPhone close together and plugged in if possible. When the restore finishes, your watch will restart and show your old settings, apps, and data.
What happens to apps and data during the transfer
Apps that you had on your old watch will read again automatically during the restore, as long as they are still installed on your new iPhone. If you deleted an app from your iPhone, it will not reinstall on the watch even if it was there before. You can add it back by opening the Watch app on your new iPhone, going to Available Apps, and tapping the plus sign next to the app name.
Health and activity data syncs through iCloud, so your activity rings, workouts, and health records all transfer without any action from you. Messages, photos, and other personal data on the watch itself also restore from the backup. The only data you might lose is anything created on the watch between your last iCloud backup and the moment you unaired — usually just a few minutes of activity or a recent message.
Troubleshooting a pairing that will not complete
If the pairing screen does not appear after you hold the watch and iPhone together, restart both devices. Turn off the iPhone completely, wait 10 seconds, and turn it back on. Then force restart the watch by pressing and holding both the side button and the digital crown for 10 seconds until you see the Apple logo.
Make sure Bluetooth is on in your iPhone settings and that you are connected to Wi-Fi. The watch needs both to read the backup. If the pairing starts but gets stuck at the restore step, check your Wi-Fi connection — a weak signal is the most common reason the restore hangs. Move closer to your router or switch to a different network if one is available.
If the watch is still showing the setup screen after 30 minutes, force restart it again and try pairing once more. If it still will not work, unpair it again (either with the old iPhone if you still have it, or remotely through iCloud), and then attempt the pairing from the beginning.
Keeping your old watch settings if you want to pair a second phone
If you are keeping your old iPhone and want the watch to work with both phones, do not unpair it. Instead, open the Watch app on your new iPhone and tap Start Pairing. When the system asks whether to set up as new or restore from backup, choose Set Up as New. This creates a separate pairing between the watch and the new phone.
The watch can only connect to one phone at a time, so it will switch between them depending on which one is nearby and turned on. This is useful if you have a work phone and a personal phone, but it means the watch will not sync data to both phones simultaneously. Health data still goes to iCloud and appears on both phones, but app settings and messages may differ between the two pairings.
Frequently Asked Questions
Do I lose my activity data when I transfer the watch to a new phone?
No. Activity data, workouts, and health records are stored in iCloud, not on the watch itself, so they follow your Apple ID to the new phone automatically. The backup created during unpair also includes recent activity that has not synced yet, so you should not lose anything.
Can I pair my watch to a new iPhone before unpairing from the old one?
No. A watch can only be paired to one phone at a time. You must unpair from the old phone first, or the new phone will not recognize it as available to pair. If you try to pair without unpairing, the watch will stay connected to the old phone.
What if I forgot my Apple ID password?
You will need to reset it before you can unpair the watch. Go to iforgot.apple.com on any device, enter your Apple ID email, and follow the steps to reset your password. Once you have a new password, you can unpair the watch normally.
How long does the whole transfer take?
Unpairing takes 2 to 5 minutes, and pairing plus restore takes 10 to 20 minutes depending on your internet speed and how much data is on the watch. Plan for 30 minutes total if everything goes smoothly. If your internet is slow, it can take longer.
Will my watch apps transfer to the new phone?
Apps transfer only if they are still installed on your new iPhone. If you deleted an app from the new phone, it will not reinstall on the watch. You can manually add any apps back through the Watch app on your new iPhone.