Unpair your watch from your old iPhone first

Before your Apple Watch will work with a new phone, you must unpair it from the old one. This severs the Bluetooth connection and clears the watch's memory of that specific iPhone. Open the Watch app on your old iPhone, tap the My Watch tab at the bottom, then tap the watch name at the top. Scroll down and tap Unpair Apple Watch. You'll be asked to enter your Apple ID password — this protects your watch from being erased by someone else.

The unpair process takes a few minutes. Your watch will restart and return to its factory state, which means all apps, settings, and data stored on the watch itself will be erased. Data synced to iCloud (like your activity rings and health information) stays safe and will restore when you pair with the new phone. If you skip this step and try to pair with a new iPhone, the watch will refuse to connect.

Key Takeaways

  • You must unpair the watch from your old iPhone through the Watch app before pairing it with a new one, or the connection will fail.
  • Unpairing erases apps and settings on the watch itself, but your health data and activity history remain in iCloud and restore automatically.
  • The new pairing process takes 10 to 15 minutes and requires your Apple ID password, which must be the same account used on the new iPhone.
  • If your new iPhone is a different size or model, you may need to select a new watch band size during setup.
  • Cellular watches require a separate cellular plan transfer through your carrier, which does not happen automatically during pairing.

Set up your new iPhone and sign in with the same Apple ID

Your Apple Watch pairs to an iPhone through your Apple ID, not just through Bluetooth. This means the new iPhone must be signed into the same Apple ID account as your watch expects. During iPhone setup, you'll be asked to sign in with an Apple ID. Use the same one you used on your old phone. If you create a new account or sign in with a different one, the watch will not recognize it during pairing.

Make sure two-factor authentication is turned on for your Apple ID before you start. This is a security step that Apple requires for watch pairing. You can check this in Settings > [Your Name] > Password & Security on any Apple device. If two-factor authentication is off, turn it on now — you'll receive a code on a trusted device to confirm the change.

Open the Watch app and start the pairing process

Once your new iPhone is set up and signed in, open the Watch app. Tap Start Pairing. Hold your unpaired Apple Watch close to the iPhone — within a few inches. The iPhone will scan for the watch using Bluetooth. When the watch appears on screen, tap it to confirm. The pairing process will begin, and you'll see a series of setup screens.

The scan usually takes 30 seconds to a minute. If the watch does not appear, make sure Bluetooth is turned on in Settings > Bluetooth on the iPhone. Also check that the watch is powered on — press and hold the side button until you see the Apple logo. If the watch still will not appear after two or three attempts, restart both devices and try again.

Restore your data from iCloud backup

During pairing, you'll be asked whether to restore from a backup or set up as new. Choose Restore from Backup. The iPhone will pull your watch settings, apps, and health data from iCloud. This restores your activity rings, workouts, heart rate history, and any watch faces you had customized. The restoration happens in the background while the pairing completes.

Restoration takes longer than the initial pairing — usually 5 to 10 minutes depending on how much data you have. Keep the watch and iPhone close together and plugged in during this time. Do not force-quit the Watch app or restart either device. If the restoration fails partway through, you can start the pairing process over and choose Restore from Backup again.

Complete the setup screens and authenticate

After restoration, you'll see screens asking you to agree to terms, set up Siri, and choose notification settings. These are the same screens you saw when you first set up the watch. You can change these settings now or skip them and adjust them later in the Watch app. Near the end of setup, you'll be asked to enter your Apple ID password again. This confirms that you own the account and the watch.

Once you enter your password, the pairing is complete. The watch will show a checkmark, and you'll return to the Watch app. Your watch face should appear on the iPhone screen. Give the watch a few minutes to finish syncing any remaining data in the background — you may see a spinning circle on the watch face during this time.

Transfer cellular service if your watch has it

If you have a cellular Apple Watch, the cellular connection does not transfer automatically during pairing. You must contact your carrier separately to move the cellular plan to the new iPhone. Call your carrier's customer service or visit their website. You'll need to provide the phone number of your new iPhone and confirm that you want to add the watch to the plan.

Most carriers charge a small monthly fee for watch cellular service — usually $10 to $15 — but this is separate from your phone plan. Some carriers offer a free trial period for watch cellular when you add it to a new phone. Ask about this when you call. Once the carrier confirms the transfer, the watch will connect to cellular networks within a few minutes. You can check this in the Watch app under Cellular.

Verify all connections and test basic functions

After pairing is complete, check that everything is working. Open an app on the watch to confirm it responds. Raise your wrist to wake the screen. Send a test message from the iPhone to the watch to make sure notifications arrive. Check the Watch app on the iPhone — it should show your watch name, battery percentage, and software version without any error messages.

If the watch shows a red exclamation mark or says it is unpaired, the connection dropped during setup. Unpair the watch again through the Watch app and repeat the pairing process from the beginning. This usually fixes the problem. If you see a message about needing to update watchOS, connect the watch to power and keep it near the iPhone — the update will read and install automatically over the next few minutes.

Frequently Asked Questions

What happens to my activity data and health information when I switch phones?

Your activity rings, workouts, heart rate data, and other health information are stored in iCloud, not on the watch itself. When you pair with the new iPhone and choose Restore from Backup, all of this data returns automatically. You will not lose any history or progress.

Can I pair my watch to two iPhones at the same time?

No. An Apple Watch can only be paired to one iPhone at a time. If you try to pair it to a second iPhone without unpairing from the first, the connection will fail. You must unpair from the old phone first, even if you no longer have it in your hands.

What if I don't have my old iPhone anymore?

You can still unpair the watch remotely through iCloud.com. Sign in with your Apple ID, go to Find My, select your watch, and choose Remove. This unpairs it without needing the old phone. After removal, you can pair it with your new iPhone normally.

Do I need to re-read all my watch apps after switching phones?

No. Apps you had installed on the watch are restored from your iCloud backup automatically. If an app does not restore, open the App Store on the watch and search for it by name, then tap the cloud icon to reinstall it.

Why does my watch say it needs to update watchOS after pairing?

watchOS updates are tied to your Apple ID and iCloud account, not to a specific iPhone. If a new version is available, the watch will prompt you to install it after pairing. Connect the watch to power and keep it near the iPhone — the update downloads and installs automatically, usually within 10 to 15 minutes.