The basic steps to pair your Apple Watch with a new phone
When you get a new iPhone, your Apple Watch does not automatically connect to it. You need to unpair the watch from your old phone first, then pair it with the new one. The process takes about 10 to 15 minutes and walks you through each step on your watch screen.
Start by unlocking your new iPhone and opening the Watch app (the icon looks like a small watch face). Tap "Start Pairing" at the bottom of the screen. Your iPhone will ask for permission to use Bluetooth and location services — allow both. Then hold your iPhone's camera up to the animation on your Apple Watch screen until the watch appears in the viewfinder. The pairing should complete within a minute or two.
If the camera method does not work, you can pair manually instead. In the Watch app on your iPhone, tap "Pair Apple Watch Manually" and enter the eight-digit code shown on your watch screen. This takes longer but works if your camera is damaged or the lighting is poor.
Key Takeaways
- You must unpair your watch from your old iPhone before pairing it with a new one, or the watch will stay connected to the old phone.
- The fastest pairing method uses your iPhone's camera to scan an animation on the watch screen, which usually takes one to two minutes.
- If the camera method fails, you can enter the eight-digit code shown on your watch manually in the Watch app instead.
- Your watch will ask to restore from a backup during setup — choosing "Restore from Backup" copies your apps and settings, while "Set Up as New" starts fresh.
- Bluetooth and location services must be turned on for pairing to work, and your iPhone and watch must be within a few feet of each other.
Why you need to unpair from your old phone first
Your Apple Watch can only be paired to one iPhone at a time. If you try to pair it with a new phone while it is still connected to your old one, the watch will stay locked to the old phone and the new pairing will fail. The watch does not automatically switch over.
To unpair, open the Watch app on your old iPhone, go to the "My Watch" tab, tap your watch name at the top, then tap the information icon (a small circle with an "i"). Scroll down and tap "Unpair Apple Watch." You will be asked to enter your Apple ID password — this erases the watch and prepares it for a new pairing. The process takes a few minutes.
If you no longer have access to your old iPhone, you can unpair remotely through iCloud.com. Sign in with your Apple ID, go to "Find My," select your watch from the device list, and choose "Remove from Account." This also erases the watch and readies it for pairing with your new phone.
What happens during the restore or setup choice
After your watch pairs with your new iPhone, you will see a screen asking whether to restore from a backup or set up as new. If you backed up your old watch before unpairing it, choosing "Restore from Backup" will copy over your apps, watch faces, and settings. This is the faster route if you want everything the way it was.
Choosing "Set Up as New" starts with a blank watch. You will need to read your apps again from the App Store on your iPhone and rebuild your watch faces and settings from scratch. This takes longer but can fix problems if your old watch was running slowly or had glitchy apps.
The backup is stored in your iCloud account, so it does not matter if you no longer have your old iPhone — as long as you sign in with the same Apple ID on your new phone, the backup will be there. The restore process usually takes 5 to 10 minutes depending on how many apps you had.
Bluetooth and location settings you need to turn on
Before you start pairing, make sure Bluetooth is on in your iPhone settings. Open Settings, tap Bluetooth, and toggle it on if it is off. Your watch will not appear in the pairing screen if Bluetooth is disabled.
Location services also need to be on, though your iPhone may ask for permission during pairing rather than requiring you to turn it on beforehand. If pairing stalls, go to Settings, tap Privacy, then Location Services, and make sure it is toggled on. Some features on your watch — like weather and maps — will not work without location services, so leaving it on is worth it.
Keep your iPhone and watch within a few feet of each other during pairing. If they are too far apart, the Bluetooth connection will drop and you will need to start over. Once pairing is complete, your watch can stay connected from across a room or even in another room, but the initial pairing needs them close.
What to do if pairing fails or gets stuck
If the camera pairing times out or shows an error, try the manual code entry instead. In the Watch app, tap "Pair Apple Watch Manually," then type the eight-digit code from your watch screen into your iPhone. This method is slower but more reliable if your camera is having trouble or the lighting is poor.
If pairing fails multiple times, restart both devices. Hold down the side button on your watch until the power-off slider appears, then slide to power off. Wait 10 seconds, then press the side button again to turn it back on. On your iPhone, hold down the side button and volume button together until the power-off slider appears, then slide to power off and turn it back on.
After restarting, make sure Bluetooth is still on and try pairing again. If it still does not work, unpair the watch completely (using the method described above) and start the pairing process from the beginning. Occasionally a partial connection can block a fresh pairing, so a full unpair and restart clears it.
Transferring your data and apps to the new setup
If you chose to restore from backup, your apps will read automatically over the next few minutes. You do not need to do anything — just leave your iPhone and watch near each other and plugged in if possible. Apps read in the background, and you can use your watch while this happens.
If you chose to set up as new and want your apps back, open the App Store on your iPhone, go to the "Search" tab, and look for each app you want. Tap the cloud icon next to the app name to read it to your watch. You can also open the Watch app on your iPhone, go to the "App Store" tab, and browse apps there — tapping the cloud icon will install them on your watch.
Your health and fitness data (steps, workouts, heart rate) is stored separately from your watch backup and syncs through your Apple ID. As long as you sign in with the same Apple ID on your new iPhone, your health history will appear in the Health app automatically. This happens in the background and does not require any action from you.
Why your watch may need to be erased during pairing
When you unpair your watch, it gets erased completely. This is a security measure — it prevents someone from pairing a stolen watch to their own phone without the original owner's permission. The erasing also clears out old data and settings that might conflict with the new pairing.
Because of this, you cannot pair the same watch to two iPhones at the same time, and you cannot keep your old pairing active while adding a new one. The watch has to choose one owner. If you ever want to pair it back to your old iPhone, you would need to unpair it from the new phone first and go through the same process in reverse.
Frequently Asked Questions
Can I pair my Apple Watch to multiple iPhones?
No. Your watch can only be paired to one iPhone at a time. If you want to switch it to a different phone, you must unpair it from the current phone first. The watch will be erased during unpairing, but your backup will restore your apps and settings on the new phone.
What if I do not have my old iPhone anymore?
You can still unpair your watch remotely through iCloud.com. Sign in with your Apple ID, go to "Find My," select your watch, and choose "Remove from Account." This erases the watch and prepares it for pairing with your new phone. Your backup will restore from iCloud when you pair.
Do I lose my health data when I pair to a new phone?
No. Your health and fitness data is tied to your Apple ID, not your watch or phone. As long as you sign in with the same Apple ID on your new iPhone, your steps, workouts, and heart rate history will appear automatically in the Health app.
How long does pairing actually take?
The camera pairing method usually takes one to two minutes. Manual code entry takes three to five minutes. After pairing, restoring from backup takes another five to ten minutes depending on how many apps you had. The whole process from start to finish is usually 10 to 15 minutes.
Why does my watch keep disconnecting from my new iPhone?
Make sure Bluetooth is on and your iPhone and watch are within range. If disconnections keep happening, restart both devices and try pairing again. If the problem continues, unpair completely and start fresh — sometimes a partial connection can cause repeated drops.