When to replace the screen yourself versus taking it to a repair shop

You can replace an iPhone screen yourself if you have the right tools, a steady hand, and patience for a process that usually takes 30 minutes to an hour. The real question is whether the cost and risk make sense for your situation. A screen replacement kit costs $20 to $60 depending on your iPhone model. A repair shop charges $150 to $400, but they handle the risk if something breaks during the repair, and they may provide the work.

Self-repair makes sense if your phone is out of warranty, you are comfortable with small mechanical tasks, and you have already decided the phone is worth keeping. It does not make sense if your phone is still under AppleCare+ (Apple's protection plan), because AppleCare covers screen damage for a $29 service fee — far cheaper than buying tools and a screen. It also does not make sense if your phone is cracked so badly that the glass is in pieces, because removing it safely becomes much harder.

Before you decide, check whether your iPhone model has a screen that is glued or soldered in place. Newer models are glued, which means you need a heat gun or heat pad to soften the adhesive first. Older models sometimes have screens held by screws alone, which is simpler. Look up your specific model number online to find out which type you have.

Key Takeaways

  • A screen replacement kit costs $20 to $60, while a repair shop charges $150 to $400, but the shop assumes the risk if something breaks.
  • If you have AppleCare+, pay the $29 service fee instead of replacing the screen yourself, because it is far cheaper and covered.
  • You need a heat gun or heat pad, a suction cup, a plastic pry tool, a screwdriver set, and tweezers — buying these separately costs more than a kit.
  • The screen is glued to the frame on most current iPhones, so you must heat it first or the glass will shatter when you try to pry it up.
  • If you crack the new screen during installation or damage the frame, you will have spent money and time with a broken phone.

What tools and parts you need to buy

A screen replacement kit for your iPhone model includes the screen itself, a suction cup, plastic pry tools, and usually a small screwdriver. Kits run $25 to $50 on Amazon or eBay, and the screen is already cut to fit your exact model. Do not buy a generic screen — it will not fit properly and may not work at all. Search for your iPhone model number (found in Settings > General > About) plus "screen replacement kit" to find the right one.

Beyond the kit, you need a heat gun or a heat pad. A heat gun costs $15 to $30 and blows hot air; a heat pad costs $10 to $20 and works like a heating blanket. Either one softens the adhesive that holds the screen to the frame. You also need isopropyl alcohol (the kind used for cleaning electronics, not rubbing alcohol for wounds) to dissolve any remaining adhesive after you remove the old screen. A small bottle costs $5 to $8.

If the kit does not include tweezers, buy a pair for $3 to $5 — you will need them to handle small connectors inside the phone without dropping them. Some kits include a spudger, which is a flat plastic tool for disconnecting cables. If yours does not, the plastic pry tools in the kit usually work instead. Do not use metal tools or screwdrivers on the delicate connectors inside the phone.

How to remove the old screen safely

Power off your iPhone completely before you start. This prevents accidental damage to the electronics inside if you accidentally touch something while the phone is on. Go to Settings > Power Off and wait for the screen to go dark.

Heat the edges of the screen with your heat gun or heat pad for 2 to 3 minutes. Hold the heat gun 3 to 4 inches away from the phone and move it slowly around all four edges. The goal is to warm the adhesive, not to make the phone too hot to touch. If you can hold your finger on the screen for more than a few seconds, it is hot enough.

Place the suction cup on the screen near one corner, away from the home button or camera. Pull the suction cup toward you gently and steadily — do not jerk it. You should see a small gap appear between the screen and the frame. If nothing happens after 10 seconds of steady pressure, heat the edges again for another minute and try a different corner.

Once you have a gap, slide a plastic pry tool into it and work your way around the phone, lifting the screen slightly as you go. Move slowly and let the heat do the work. If you feel strong resistance, stop, heat that section again, and try once more. Forcing it will crack the screen or damage the frame. When the screen is loose enough, carefully peel it away from the phone, but do not pull it completely off yet — the screen is still connected to the phone by cables inside.

Disconnecting and removing the screen connector

Look inside the phone where the screen connects. You will see a small rectangular connector, usually held in place by a metal bracket. This bracket is screwed down with one or two tiny screws. Use your small screwdriver to remove these screws and set them somewhere safe — they are straightforward to lose.

Lift the metal bracket away from the connector. You should now see the cable itself. Use your plastic pry tool or spudger to gently lift the cable straight up and out of its socket. Do not pull sideways or at an angle — straight up is the only safe direction. Once the cable is free, you can fully remove the old screen.

Before you install the new screen, clean the frame where the old adhesive was. Use a plastic scraper or the edge of a plastic pry tool to remove any dried adhesive, then wipe the frame with isopropyl alcohol on a lint-free cloth. Let it dry completely — this usually takes 2 to 3 minutes. A clean frame helps the new screen stick properly and last longer.

Installing the new screen and reconnecting the cable

Take the new screen out of its packaging and inspect it for damage. Look at the edges and corners, and check that the screen lights up when you hold it up to a light (this confirms the cable is not damaged). If anything looks wrong, stop and contact the seller before you proceed.

Connect the screen cable to the phone first, before you glue the screen down. Align the cable connector with the socket inside the phone and press it straight down until you hear or feel a click. The cable should sit flush in the socket with no gap. Replace the metal bracket and screw it back down — do not overtighten, or you may crack the connector.

Carefully lower the new screen onto the phone frame, starting at the top. Press down gently along the edges to seat it evenly. The screen should sit flush with the frame all the way around. If there are gaps, lift it up and try again. Once it is aligned, press down firmly around all four edges for 30 seconds to set up the adhesive. Let the phone sit undisturbed for at least 2 hours before you use it — the adhesive needs time to set.

Testing the screen and what to do if something goes wrong

Power on your iPhone and check that the screen lights up and responds to touch. Swipe across the screen in different directions and tap different areas to make sure the entire surface works. Check the corners and edges especially, because those areas are most likely to have connection problems if the screen was not seated properly.

If the screen does not light up at all, power off the phone and check that the cable is fully connected. Open the phone again, disconnect the cable, and reconnect it firmly. Make sure the metal bracket is screwed down. If the screen still does not work, the cable may be damaged, and you will need to contact the seller for a replacement screen.

If part of the screen does not respond to touch, or if you see lines or discoloration, the screen may not be seated evenly. Power off the phone, carefully heat the edges again, and press down firmly on the areas that are not working. Let it sit for another hour. If the problem persists, the screen itself may be defective.

If you cracked the new screen during installation or damaged the frame, you have a few options. If the damage is minor and the phone still works, you can use it as is or try the repair again with a new screen. If the damage is severe, take the phone to a repair shop and explain what happened — they may be able to fix it, though you will pay for the repair. This is the main risk of doing the repair yourself.

When to take your phone to a professional instead

Take your phone to a repair shop if the screen is cracked so badly that glass is missing or if the frame itself is bent or cracked. A bent frame makes it nearly impossible to seat a new screen evenly, and a professional has better tools to straighten it. If you are not confident in your ability to handle small mechanical tasks, a professional is also the safer choice — the cost is higher, but the risk of making things worse is lower.

Apple Stores offer screen replacement for iPhones under warranty or with AppleCare+. If you have either, call your local Apple Store to schedule an appointment. They usually complete the repair the same day. If your phone is out of warranty and you do not have AppleCare+, Apple charges $129 to $329 depending on your model.

Third-party repair shops (not Apple) often charge less — usually $100 to $200 — and may have faster turnaround times. Search for "iPhone screen repair near me" to find local options. Read reviews before you choose a shop, and ask whether they use original Apple screens or aftermarket screens. Original screens are more expensive but last longer and work more reliably.

Frequently Asked Questions

Can I replace the screen if my phone is still under warranty?

If your phone is under the standard one-year warranty and the screen broke from a manufacturing defect (not from dropping it), Apple will replace it for free. If you dropped it, the warranty does not cover it. If you have AppleCare+, screen damage is covered for a $29 service fee regardless of how it broke.

What is the difference between an original Apple screen and an aftermarket screen?

Original Apple screens are made by Apple and work exactly like the screen that came with your phone. Aftermarket screens are made by third-party manufacturers and are cheaper but may have lower brightness, less accurate colors, or shorter lifespan. Most aftermarket screens work fine, but some have issues with touch sensitivity or display quality.

Will replacing the screen myself void my warranty?

Opening your iPhone yourself voids the remaining manufacturer warranty. If something else breaks after you replace the screen, Apple will not cover it under warranty. AppleCare+ coverage also ends if you open the phone yourself, though you can still pay out of pocket for repairs.

How long does the new screen last after I install it?

A properly installed screen lasts as long as the original screen — usually several years. If the screen was not seated evenly or if adhesive was left on the frame, it may start to separate from the edges after a few months. This does not mean the screen is broken, but it can let dust inside the phone.

What should I do with the old broken screen after I remove it?

Do not throw it in the trash. Broken glass is a safety hazard, and the screen contains materials that should be recycled. Wrap it in newspaper or place it in a small box, seal it, and label it as broken glass. Take it to an electronics recycling center or ask your local waste management facility where to drop it off.