Apple Watch batteries are glued in, not user-replaceable, and opening the case yourself will damage the watch

You cannot replace an Apple Watch battery yourself. The battery is permanently glued to the internal frame, and the case is sealed with adhesive rather than screws. If you try to open it with tools, you will crack the screen, damage the Taptic Engine, or sever the antenna — all of which cost more to repair than a battery replacement through Apple.

Your only practical option is to have Apple or an Apple-authorized service provider replace the battery for you. This takes about one to two weeks and costs between $79 and $99 depending on your watch model, plus tax. If your watch is still under warranty and the battery is failing due to a manufacturing defect rather than normal wear, Apple may replace it at no charge.

Key Takeaways

  • Apple Watch batteries are glued in place and cannot be removed without specialized equipment that will damage the watch if misused.
  • Apple or an Apple-authorized service provider is the only safe way to replace the battery, costing $79 to $99 plus tax.
  • Battery replacement takes one to two weeks at most Apple locations, though some third-party repair shops may be faster.
  • If your watch is under warranty and the battery is defective, Apple will replace it free; if it is normal wear, you pay the service fee.
  • You can extend battery life before replacement by reducing screen brightness, turning off background app refresh, and disabling always-on display.

When your Apple Watch battery is actually failing

A healthy Apple Watch battery holds a charge for about 18 hours under normal use. If your watch dies before noon, shuts down at 20 percent battery, or will not hold a charge overnight even after a full reset, the battery is likely failing.

Batteries degrade over time. After about two to three years of daily charging, an Apple Watch battery typically loses 20 to 30 percent of its capacity. This is normal wear, not a defect. If your watch is older than three years and the battery is draining faster than it used to, replacement is the practical solution.

Before you assume the battery is bad, restart your watch by holding the side button until the power-off slider appears, then slide to power off. Wait 10 seconds, then hold the side button again until the Apple logo appears. A restart often fixes temporary battery drain caused by a stuck app or a software glitch.

How to book a battery replacement through Apple

Go to apple.com/support and select your watch model. Click "Battery and charging" under the Topics section, then scroll to "Battery service" and select "Set up service." You can also open the Apple Support app on your iPhone, tap the Devices tab, select your watch, and choose "Battery service."

Apple will ask whether you want to mail in your watch or visit a store. If you choose mail-in service, Apple will send you a prepaid shipping label. You pack the watch, drop it off, and Apple returns it within one to two weeks. If you visit an Apple Store, you can often get a same-day or next-day appointment, though the watch may still take a few days if the store has to send it to a repair center.

Have your Apple ID and password ready. Apple will ask for your watch's serial number, which you can find in the Watch app on your iPhone under General > About, or on the back of the watch itself.

Apple-authorized service providers as an alternative

If you do not have an Apple Store nearby, you can use an Apple-authorized service provider. These are independent repair shops that Apple has certified to perform battery replacements and other repairs. You can find them by going to apple.com/support/repair, entering your zip code, and filtering for "Apple Watch" under the product type.

Authorized providers charge the same price as Apple ($79 to $99) and use genuine Apple parts. The main difference is speed — some authorized shops can replace the battery in one to three days instead of one to two weeks. Call ahead to confirm they have the parts in stock and to book an appointment.

Non-authorized third-party repair shops may charge less, but they often use aftermarket batteries that do not hold a charge as long as genuine Apple batteries. They also cannot access Apple's warranty system, so if something goes wrong during the repair, you have no recourse.

What happens to your data during battery replacement

Apple does not erase your watch during a battery replacement. Your data, apps, and settings stay on the device. When you get the watch back, it will be exactly as you left it — you do not need to set it up again or re-pair it with your iPhone.

Before you send your watch in, make sure it is backed up to your iPhone. Open the Watch app, go to General > About, and scroll to the bottom. If you see a green checkmark next to "Backup," your watch is backed up. If you see a red X or a warning, tap it and follow the prompts to back up manually.

How to extend battery life while you wait for replacement

If your battery is failing but you cannot get a replacement when ready, you can stretch the charge by reducing power consumption. Lower the screen brightness by swiping up from the bottom of the watch face and dragging the brightness slider left. Turn off the always-on display by opening Settings > Display & Brightness and toggling off "Always On." Disable background app refresh by opening Settings > General > Background App Refresh and turning it off for apps you do not use constantly.

Close apps you are not using by swiping up from the bottom of the screen and swiping left on each app. Turn off Wi-Fi and Bluetooth when you are not using them — swipe up and tap the Wi-Fi or Bluetooth icon to toggle them off. These changes will not solve a failing battery, but they can buy you a few extra hours per day until you can get it replaced.

Cost breakdown and warranty coverage

ScenarioCostTimeline
Battery replacement (out of warranty)$79–$99 plus tax1–2 weeks (Apple Store mail-in) or 1–3 days (authorized provider)
Battery replacement (under warranty, defective battery)Free1–2 weeks (Apple Store mail-in) or 1–3 days (authorized provider)
DIY repair attempt (cracked screen, antenna damage)$200–$400 for full replacementN/A — not recommended
Third-party non-authorized repair$40–$701–3 days, but aftermarket battery quality varies

Apple Watch batteries are covered under the one-year limited warranty only if the battery fails due to a manufacturing defect. Normal battery degradation — where the battery loses capacity over time — is not covered. If your watch is two years old and the battery drains faster than it used to, Apple will charge you the standard service fee.

If you purchased AppleCare+ for your watch, battery replacement is covered at no cost once per year. Check your coverage by opening the Watch app on your iPhone, tapping the My Watch tab, scrolling to AppleCare+, and tapping "View Coverage." If you have AppleCare+, mention it when you book your service appointment.

Frequently Asked Questions

Can I replace the battery myself with a kit from Amazon or eBay?

No. These kits include a replacement battery and tools, but opening an Apple Watch requires a heat gun to soften the adhesive, a specialized suction cup to lift the screen without cracking it, and precision tweezers to disconnect the antenna and Taptic Engine. One slip damages components that cost $200 to $400 to replace. The battery itself costs $15 to $30, so a DIY attempt is not worth the risk.

How long does a replacement battery last?

A genuine Apple replacement battery lasts about two to three years under normal daily use, just like the original. After that, it will degrade at the same rate. If you replace the battery now, you can expect to replace it again in 2024 or 2025, depending on how heavily you use the watch.

What if I lose my watch while it is being repaired?

Apple is responsible for your watch while it is in their possession. If it is lost or damaged during repair, Apple will replace it at no charge. Keep your shipping confirmation and tracking number if you use mail-in service, and ask for a claim reference number if you drop it off in person.

Can I use my watch while waiting for a battery replacement?

Yes. A failing battery does not make the watch unsafe to wear. It just will not hold a charge as long. You can continue to use it, but you may need to charge it more often — possibly twice a day if the battery is severely degraded. Just plan your service appointment before the battery becomes so weak that the watch is unusable.

Is there a difference between Series 3, Series 4, and newer models for battery replacement?

The price and process are the same across all Apple Watch models: $79 to $99 and one to two weeks through Apple. Older models like the Series 3 are still supported, though some authorized providers may have longer wait times because they order parts less frequently for older watches.