Pairing Shokz Open Run for the first time
The Shokz Open Run connect through Bluetooth like any other wireless headphones, but the pairing process is slightly different because they have a dedicated pairing button instead of a power button. To pair them to a new device, hold the button on the back of the left earpiece for three seconds until you see a blue and red light flashing alternately. This flashing pattern means the headphones are in pairing mode and searching for a device to connect to.
Once the lights are flashing, go to your phone or device's Bluetooth settings and look for "Shokz Open Run" in the list of available devices. Tap it to connect. The lights will stop flashing and turn solid blue once the pairing is complete. Your device will remember this connection, so you won't need to repeat this process unless you reset the headphones or pair them to a different device.
If the headphones don't appear in your Bluetooth list after 30 seconds, try holding the pairing button for another three seconds. Some devices take longer to detect new headphones. If you still don't see them, restart your phone's Bluetooth and try again.
Key Takeaways
- Hold the back button on the left earpiece for three seconds to enter pairing mode, which shows as alternating blue and red lights.
- Go to your device's Bluetooth settings and select "Shokz Open Run" from the available devices list to complete the connection.
- The headphones will remember your device after the first pairing, so future connections happen automatically when you turn them on.
- If pairing fails, restart your phone's Bluetooth and try holding the pairing button for another three seconds.
Connecting to a second device without erasing the first pairing
Shokz Open Run can remember up to eight different devices, so you can pair them to your phone, tablet, and smartwatch without losing the connection to any of them. To add a new device without unpairing the old one, straightforward put the headphones in pairing mode again by holding the back button for three seconds until the lights flash blue and red.
Then go to the new device's Bluetooth settings and select "Shokz Open Run" from the list. The headphones will now be paired to both devices. When you turn the headphones on, they will automatically connect to whichever device you used most recently, but you can manually switch between them through each device's Bluetooth settings if needed.
Reconnecting to a device you've already paired
After the first pairing, you don't need to enter pairing mode again. straightforward turn on the Shokz Open Run by pressing the back button once, and they will automatically connect to the last device they were paired with. This usually takes two to five seconds.
If the headphones don't connect automatically, go to your device's Bluetooth settings and tap "Shokz Open Run" manually. If they still don't connect, turn the headphones off and on again, then try once more. If you're switching between two devices you've already paired, you may need to disconnect the headphones from the first device before they'll connect to the second one.
What to do if pairing fails or gets stuck
If the headphones won't pair or keep disconnecting, the fastest fix is to reset them. Hold the back button for ten seconds until the lights flash red, then release. This clears all previous pairings and returns the headphones to factory settings. You'll then need to pair them again from scratch using the three-second button hold method.
If resetting doesn't work, make sure your phone's Bluetooth is turned completely off, wait ten seconds, then turn it back on. Some phones hold onto old pairing information even after you've deleted the device from Bluetooth settings. Restarting your phone's Bluetooth forces it to forget the old connection and search for a fresh one.
Also check that your phone's Bluetooth is set to discoverable or visible mode. Most phones do this automatically when you open Bluetooth settings, but some require you to tap an additional button. If you're still having trouble, restart your phone entirely — this clears temporary Bluetooth errors that a straightforward on-off cycle won't fix.
Switching between multiple devices quickly
Once you've paired the Shokz Open Run to multiple devices, you can switch between them without re-pairing. The headphones will stay connected to whichever device you're actively using, but you can manually switch by disconnecting from one device and connecting to another through Bluetooth settings.
The fastest way to switch is to turn off Bluetooth on the device you're leaving and turn it on for the device you're moving to. The headphones will automatically connect to the new device within a few seconds. If you want to keep Bluetooth on both devices, go to the Bluetooth settings on the device you want to use and tap "Shokz Open Run" to force a connection.
Pairing with a smartwatch or fitness tracker
Shokz Open Run can pair with smartwatches and fitness trackers the same way they pair with phones. Put the headphones in pairing mode by holding the back button for three seconds, then go to your watch's Bluetooth settings and select "Shokz Open Run." The process is identical to pairing with a phone, though some watches take longer to search for available devices.
Once paired, the headphones will connect to your watch automatically when you turn them on, even if your phone is nearby. If you want the headphones to connect to your phone instead, disconnect them from your watch's Bluetooth settings first, or turn off Bluetooth on the watch entirely.
Troubleshooting connection drops and disconnections
If the Shokz Open Run keep disconnecting from your device, the problem is usually interference or distance. Bluetooth works best within 30 feet of your phone with no walls or metal objects between them. If you're experiencing drops, move closer to your phone or remove any obstacles.
Another common cause is too many devices competing for the connection. If you have your headphones paired to your phone, watch, and tablet all at once, and all three have Bluetooth on, they may fight for the connection. Turn off Bluetooth on devices you're not actively using. You can also check your phone's Bluetooth settings to see if "Shokz Open Run" shows as connected or just paired — if it shows as paired but not connected, tap it to force a reconnection.
If disconnections happen only with one specific device, try unpairing the headphones from that device completely, restarting the device, and pairing again from scratch. This clears any corrupted pairing data that might be causing the problem.
Frequently Asked Questions
How do I know if the Shokz Open Run are in pairing mode?
The lights on the back of the left earpiece will flash blue and red alternately. If you see a solid blue light, they're already connected to a device. If there's no light at all, they may be off or the battery may be dead.
Can I pair Shokz Open Run to multiple devices at the same time?
They can be paired to up to eight devices, but they can only be actively connected to one device at a time. You can switch between them by disconnecting from one device's Bluetooth settings and connecting to another.
What if I forget which devices my Shokz Open Run are already paired to?
Reset the headphones by holding the back button for ten seconds until the lights flash red. This erases all previous pairings. You'll then pair them to your devices again from scratch, starting with the three-second button hold to enter pairing mode.
Do I need to pair the Shokz Open Run every time I use them?
No. After the first pairing, they automatically connect to the last device you used when you turn them on. You only need to pair them again if you reset the headphones or want to add a new device.
Why won't my Shokz Open Run connect to my device even though they're paired?
Try turning off Bluetooth on your device, waiting ten seconds, and turning it back on. If that doesn't work, restart your phone entirely. If the problem persists only with one device, unpair the headphones from that device and pair them again from scratch.