The basic process: what happens when you pair

When you pair an Apple Watch to a new phone, you are telling the watch and phone to recognize each other and share data. The watch will erase itself during this process — it clears all apps, messages, and settings so it can sync fresh from your new phone. This takes about 15 minutes total, and your watch will restart several times. You need both devices charged to at least 50 percent, and they need to be within a few feet of each other.

The pairing process creates an encrypted connection between the two devices. Once paired, your watch will automatically back up to iCloud, so if you pair it to yet another phone later, you can restore from that backup instead of starting over. For now, though, the watch will be blank until the pairing finishes and your phone sends over your preferences.

Key Takeaways

  • Your Apple Watch will erase completely during pairing, so back up anything you want to keep before you start.
  • You need both the watch and phone charged to at least 50 percent, and they must be within a few feet of each other.
  • The pairing process takes about 15 minutes and involves the watch restarting multiple times — this is normal and you should not interrupt it.
  • After pairing finishes, your watch will restore your apps, settings, and data from iCloud automatically.
  • If your watch is already paired to an old phone, you must unpair it from that phone first, or the new pairing will fail.

Unpair your watch from your old phone first

If your Apple Watch is currently paired to an old iPhone or iPad, you must unpair it before pairing it to a new one. Open the Watch app on your old phone, tap the My Watch tab at the bottom, then tap the watch name at the top. Scroll down and tap Unpair Apple Watch. You will be asked to enter your Apple ID password — this is the password for the account that owns the watch, not the phone.

The unpairing process takes a few minutes. Your watch will back up to iCloud during this time, so do not interrupt it. Once it finishes, the watch screen will show the Apple logo and a pairing animation — this means it is ready to pair to a new device. If you no longer have access to your old phone, you can still pair the watch to a new phone, but you will need to erase the watch manually first using a computer. Contact Apple Support if you are in this situation.

Start pairing on your new phone

Open the Watch app on your new iPhone or iPad. If this is the first time you are opening the Watch app, it will prompt you to set up a watch. If the app is already open from a previous setup, tap the My Watch tab, then tap the plus sign in the upper left corner. Hold your new phone near your Apple Watch so the watch can see the phone's camera.

Point your phone's camera at the animation on the watch screen. The watch will display a colorful spiral pattern — this is the pairing code. Your phone will scan this code automatically. Do not move the phone away until the phone says "Preparing Apple Watch" on the screen. This usually takes 10 to 20 seconds. If the phone cannot read the code, move closer or adjust the angle slightly, but keep the phone steady.

Enter your Apple ID and wait for the restore

After the phone reads the pairing code, it will ask you to sign in with your Apple ID. Use the same Apple ID that owns the watch — this is the account you used when you first set up the watch, not necessarily the account on your new phone. If you do not remember which account owns the watch, check the back of the watch or look at your Apple ID settings on your old phone before you unpair.

Once you enter your Apple ID password, the phone will begin restoring your watch settings and apps from iCloud. This is where most of the 15 minutes happens. Your watch will restart several times — you will see the Apple logo appear and disappear. This is normal. Do not force restart the watch or unplug anything. Leave both devices near each other and let them finish. The phone will tell you when the restore is complete.

Set up your watch preferences after pairing

Once the restore finishes, your watch will show your old settings, apps, and data. The phone will ask you a few final questions: whether you want to use the watch for payments, whether you want to set up emergency contacts, and whether you want to enable certain health features. You can skip any of these and change them later in the Watch app settings.

Your watch will now sync automatically with your new phone whenever they are near each other and connected to the same Wi-Fi network or Bluetooth. If you had a cellular Apple Watch, you may need to contact your phone carrier to transfer your cellular plan to the new phone — the watch cannot use cellular data until the carrier updates your account.

Troubleshooting if pairing gets stuck

If the phone cannot read the pairing code from the watch, restart both devices and try again. Turn off the watch by holding the side button until the power slider appears, then slide it to power off. Wait 10 seconds, then hold the side button again until the Apple logo appears. Do the same for your phone: hold the power button, slide to power off, wait 10 seconds, then power on.

If pairing still fails after a restart, check that both devices are on the same Wi-Fi network. The watch does not need Wi-Fi to pair, but it needs Wi-Fi to restore your apps and settings from iCloud. If you are on a public Wi-Fi network that requires you to log in through a web page, switch to a personal network instead. If you still cannot pair after trying these steps, force restart the watch by holding both the side button and the digital crown for 10 seconds until the Apple logo appears, then try pairing again.

What to do if you cannot access your old phone

If your old phone is lost, broken, or you no longer have it, you can still pair your watch to a new phone, but you will need to erase the watch first. Connect the watch to a computer using a USB cable, then open Finder or iTunes. Select the watch, then choose Restore. This erases the watch completely. Once it is erased, you can pair it to your new phone using the normal process above.

If you do not have a computer with Finder or iTunes, you can also erase the watch directly on the watch itself. Hold the side button until the power slider appears, then hold the digital crown until you see "Erase all content and settings." Confirm by holding the digital crown again. This takes a few minutes. Once the watch is erased, pair it to your new phone using the normal process.

Frequently Asked Questions

Do I lose my data when I pair my watch to a new phone?

No. Your watch backs up to iCloud when you unpair it from your old phone, and your new phone restores that backup automatically during pairing. Your apps, settings, messages, and health data will all be there when pairing finishes. The only data you lose is anything you created on the watch after the last backup.

Can I pair my watch to multiple phones at the same time?

No. An Apple Watch can only be paired to one phone at a time. If you try to pair it to a second phone without unpairing from the first, the pairing will fail. You must unpair from the old phone first, even if you no longer have that phone.

Why does my watch keep disconnecting from my new phone?

This usually means the watch and phone are too far apart or Bluetooth is turned off on one of them. Make sure Bluetooth is on in your phone's Settings, and keep the watch and phone within 30 feet of each other. If they still disconnect, restart both devices. If the problem continues, unpair and pair again.

How long does it take to restore apps and settings to my watch?

The restore usually takes 10 to 15 minutes, depending on how many apps you have and how fast your internet is. Larger watches with more storage may take slightly longer. During this time, your watch will restart several times — this is normal and you should not interrupt it.

What if I forgot my Apple ID password?

You will need to reset your password before you can pair your watch. Go to iforgot.apple.com on your computer or phone and follow the steps to reset your password. Once you have a new password, you can use it to sign in during the pairing process.