The basic steps: pairing your mouse to iPad

To connect a wireless mouse to your iPad, turn on the mouse, open iPad Settings, tap Bluetooth, and select the mouse name when it appears in the list. The mouse will pair when ready — no codes or passwords needed. Once paired, the mouse cursor appears on your screen and you can use it right away.

The process takes about 30 seconds. Your iPad remembers the mouse after the first pairing, so next time you turn on the mouse, it will reconnect on its own without you doing anything.

Key Takeaways

  • Most wireless mice work with iPad, but the mouse must support Bluetooth — USB-only mice will not connect.
  • Your iPad must be running iPadOS 13.4 or later; older versions do not support mouse input.
  • The mouse cursor appears as a circle on iPad, not the arrow shape you see on a computer.
  • If the mouse does not appear in Bluetooth settings, restart the mouse and try again — most connection problems solve this way.

Check your iPad model and software version first

Not every iPad supports a mouse. iPad Air 2 and later, iPad Pro (all models), and iPad (5th generation and later) all work with mice. iPad mini 4 and later also work. If you have an older iPad, a mouse will not connect even if you try.

Your iPad also needs iPadOS 13.4 or later. Go to Settings, then General, then About to see your current version. If you are running an older version, go to Settings, General, Software Update to install the latest one. This usually takes 10 to 20 minutes and requires a Wi-Fi connection.

What type of wireless mouse actually works

Your mouse must use Bluetooth wireless technology. Most modern mice do — check the box or the manufacturer's website if you are unsure. Mice that connect through a USB receiver (a small dongle that plugs into a computer) will not work with iPad because iPad has no USB port to plug it into.

Bluetooth mice come in two types: those with a built-in rechargeable battery and those that use AA or AAA batteries. Both work equally well with iPad. The mouse does not need to be made by Apple — any Bluetooth mouse from any brand will pair and function.

Turn on the mouse and make it discoverable

Most Bluetooth mice have a power switch on the bottom or side. Turn it on. Some mice also have a separate button labeled "Pair" or "Connect" — if yours does, press that button once. This makes the mouse visible to your iPad for about two minutes.

If your mouse has no separate pairing button, straightforward turning it on is enough. The mouse will stay discoverable for a few minutes, which gives you time to find it in your iPad settings.

Open Bluetooth settings and select your mouse

On your iPad, open Settings (the gray gear icon). Tap Bluetooth. Wait a few seconds for the list to load. Your mouse should appear under "Other Devices" with its brand name or model number — for example, "Logitech M705" or "Apple Magic Mouse".

Tap the mouse name. Your iPad will pair with it when ready. You will see the mouse move to a section labeled "My Devices" with the word "Connected" underneath. The entire process takes about 10 seconds once you tap the name.

What to do if the mouse does not appear

If the mouse name does not show up in Bluetooth settings, restart the mouse first. Turn it off, wait five seconds, and turn it back on. Then check the Bluetooth list again. This solves the problem about 80 percent of the time.

If the mouse still does not appear, restart your iPad. Hold the top button and one volume button until "Slide to Power Off" appears, then slide to turn it off. Wait 10 seconds, then hold the top button again until the Apple logo appears. Once your iPad restarts, turn on the mouse again and check Bluetooth settings.

If you have tried restarting both devices and the mouse still will not appear, the mouse battery may be dead. Charge or replace the batteries, wait 30 seconds, and try again.

How the cursor works on iPad

When your mouse connects, a circular cursor appears on your screen. It looks different from the arrow cursor on a computer, but it works the same way — move the mouse to move the cursor, click to select, and scroll to move up and down a page.

The cursor disappears when you are not moving the mouse, which keeps it out of your way while you read. It reappears the moment you move the mouse again. You can also use your finger to tap the screen at any time — the mouse and your finger work together, so switching between them is seamless.

Frequently Asked Questions

Can I use a trackpad instead of a mouse?

Yes. Any Bluetooth trackpad pairs the same way as a mouse. Apple's Magic Trackpad and third-party trackpads from Logitech and other brands all work. The pairing process is identical — just turn on the trackpad and select it in Bluetooth settings.

Will my mouse work with every app on iPad?

Most apps support mouse input, but not all. Older apps or games designed only for touch may ignore the mouse. If an app does not respond to your mouse, try using your finger instead. Newer apps almost always support both.

Do I have to pair my mouse every time I use it?

No. Once you pair the mouse the first time, your iPad remembers it. The next time you turn on the mouse, it reconnects automatically. You only need to go back to Bluetooth settings if you want to unpair it or connect a different mouse.

Can I connect more than one mouse to my iPad at the same time?

You can pair multiple mice to your iPad, but only one can be active at a time. If you have two mice paired and turn both on, the one you turned on most recently will be the one that works. To switch, turn off the active mouse and the other one will take over.

What if my mouse keeps disconnecting?

Move closer to your iPad — Bluetooth works best within 30 feet, but interference from other devices can reduce that range. If the mouse disconnects often, try moving away from Wi-Fi routers, microwaves, or other wireless devices. If it still disconnects, unpair the mouse (tap it in Bluetooth settings and select "Forget This Device"), then pair it again from scratch.