The basic steps for pairing a Ubotie keyboard
A Ubotie keyboard connects through Bluetooth, which means you turn on pairing mode on the keyboard, then tell your device to find and remember it. Most Ubotie keyboards have a dedicated pairing button or a key combination that puts them into pairing mode — usually a button on the back or underside, or holding Fn + a specific key for three seconds. Once the keyboard is in pairing mode (often shown by a blinking light), go to your device's Bluetooth settings, select the keyboard from the list of available devices, and confirm the pairing. After that first connection, the keyboard will reconnect automatically when you turn it on.
The exact steps differ slightly depending on whether you are pairing to Windows, Mac, iOS, or Android, but the principle is the same: put the keyboard in pairing mode first, then search for it on your device. If the keyboard does not appear in your device's Bluetooth list, make sure it is charged, the pairing button is actually being held long enough, and nothing else is currently trying to pair with it.
Key Takeaways
- Most Ubotie keyboards enter pairing mode through a dedicated button on the back or by holding Fn plus another key for three seconds.
- Your device must have Bluetooth turned on and you must open its Bluetooth settings to see the keyboard in the available devices list.
- After the first pairing, the keyboard will reconnect automatically when powered on, so you only need to pair once.
- If the keyboard does not appear, check that it is charged, the pairing button is held long enough, and no other device is currently pairing with it.
Pairing a Ubotie keyboard to Windows
On Windows 10 or 11, open Settings and go to Devices, then Bluetooth & other devices. Make sure Bluetooth is turned on. Press and hold the pairing button on your Ubotie keyboard (usually on the back or bottom) for about three to five seconds until you see a blinking light, then look for the keyboard name in the Bluetooth devices list on your computer. Click on it to pair. Windows will confirm the connection and the keyboard should be ready to use when ready.
If the keyboard does not show up in the list, turn the keyboard off and back on, then try the pairing button again. Make sure your Windows device's Bluetooth is actually enabled — some laptops have a physical Bluetooth switch or a keyboard shortcut (often Fn + a wireless icon key) that needs to be turned on first. If you have paired the keyboard before and it is not reconnecting, go to Bluetooth settings, find the keyboard in your paired devices list, and click "Remove device," then pair it again from scratch.
Pairing a Ubotie keyboard to Mac
On macOS, click the Apple menu, go to System Settings (or System Preferences on older versions), then Bluetooth. Make sure Bluetooth is on. Put your Ubotie keyboard into pairing mode by pressing its pairing button or holding Fn plus the pairing key for three to five seconds. The keyboard should appear in the Bluetooth devices list within a few seconds. Click on it and macOS will ask you to confirm the pairing — you may see a code on your screen that you need to type on the keyboard to verify, or the pairing may happen automatically.
If the keyboard appears but pairing fails, try restarting the keyboard and your Mac's Bluetooth by turning Bluetooth off in System Settings, waiting ten seconds, and turning it back on. Some older Ubotie models may require you to type a PIN code shown on your Mac — check the keyboard's manual if you see a code prompt. Once paired, the keyboard will reconnect whenever it is powered on and in range.
Pairing a Ubotie keyboard to iPhone or iPad
On iOS or iPadOS, go to Settings, then Bluetooth, and make sure Bluetooth is turned on. Put your Ubotie keyboard into pairing mode using its pairing button or key combination. The keyboard should appear in the list of available devices within a few seconds. Tap on it to pair. Your device may ask you to confirm the connection or type a code — if so, type the code shown on your screen using the keyboard itself, then press Enter.
After pairing, the keyboard will reconnect automatically whenever it is turned on and in range of your iPhone or iPad. If the keyboard does not appear in the Bluetooth list, make sure it is fully charged, the pairing button is being held long enough (usually three to five seconds), and that you are not trying to pair it to multiple devices at the same time. Most Ubotie keyboards can only connect to one device at a time, so if it is currently paired to a computer, you may need to unpair it there first.
Pairing a Ubotie keyboard to Android
On Android, open Settings and look for Bluetooth (the location varies by phone model, but it is usually under Connectivity or Wireless). Turn Bluetooth on. Put your Ubotie keyboard into pairing mode by pressing its pairing button or holding Fn plus the pairing key for three to five seconds. The keyboard should appear in the list of available devices. Tap on it to pair. Some keyboards may ask you to confirm a PIN or code — if so, type it using the keyboard and press Enter.
Once paired, the keyboard will reconnect automatically when turned on. If pairing fails or the keyboard does not appear, restart both the keyboard and your phone's Bluetooth by turning Bluetooth off in Settings, waiting a few seconds, and turning it back on. Check that the keyboard is charged — a low battery can prevent pairing. If you have paired the keyboard to another device recently, unpair it there first, since most Ubotie keyboards only connect to one device at a time.
What to do if the keyboard will not pair
If your Ubotie keyboard is not appearing in your device's Bluetooth list, start by checking the battery. A keyboard with low or dead battery will not enter pairing mode or will disappear from the list when ready. Charge it fully using the USB cable that came with it, then try pairing again. Next, make sure you are holding the pairing button long enough — most Ubotie keyboards require three to five seconds of continuous pressure, and you should see a blinking light indicating pairing mode is active.
If the keyboard is charged and the pairing button is working, restart both devices: turn off the keyboard, turn off Bluetooth on your computer or phone, wait ten seconds, then turn Bluetooth back on and power up the keyboard. If the keyboard has been paired to another device recently, unpair it there first — most Ubotie keyboards can only connect to one device at a time, and some will not enter pairing mode if they are already paired elsewhere. If none of these steps work, check the manual that came with your keyboard, as some models have different pairing procedures or require a specific key combination instead of a button.
Reconnecting after the initial pairing
After you have paired your Ubotie keyboard once, you do not need to pair it again. straightforward turn the keyboard on and it will reconnect to the last device it was paired with automatically, as long as Bluetooth is turned on. This reconnection usually takes a few seconds. If the keyboard does not reconnect automatically, make sure Bluetooth is enabled on your device, the keyboard is charged, and the keyboard is in range (typically within 30 feet for most Ubotie models).
If you want to pair the same keyboard to a different device, you do not need to unpair it from the first device — just put it into pairing mode and pair it to the new device. However, most Ubotie keyboards can only be actively connected to one device at a time, so it will disconnect from the previous device when you pair it to a new one. If you regularly switch between devices, you may want to unpair the keyboard from one device before pairing it to another, to avoid connection conflicts.
Frequently Asked Questions
How do I know if my Ubotie keyboard is in pairing mode?
Most Ubotie keyboards show a blinking light when in pairing mode — usually a blue or white LED on the keyboard itself or on the pairing button. If you do not see a light, hold the pairing button for longer (usually three to five seconds) or check your keyboard's manual for the correct pairing procedure, as some models use different indicators.
Can I pair my Ubotie keyboard to multiple devices at once?
Most Ubotie keyboards can only be actively connected to one device at a time. You can pair it to multiple devices in your Bluetooth settings, but it will only work with one device until you manually switch it. To use it with a different device, put it back into pairing mode or select it from that device's Bluetooth list.
Why does my keyboard keep disconnecting?
Disconnections usually happen because the battery is low, the keyboard is out of Bluetooth range, or another device is interfering with the connection. Charge the keyboard fully, keep it within 30 feet of your device, and make sure no other devices are trying to pair with it at the same time. If disconnections continue, try unpairing and re-pairing the keyboard.
Do I need to pair my Ubotie keyboard every time I use it?
No. After the first pairing, the keyboard will reconnect automatically whenever you turn it on, as long as Bluetooth is enabled on your device. You only need to pair it once, unless you want to connect it to a different device.
What if I lost the pairing button or it is not working?
Some Ubotie keyboards use a key combination instead of a physical button — usually Fn held down with another key for three to five seconds. Check your keyboard's manual for the correct combination. If neither the button nor the key combination works, the keyboard may need a firmware update or the pairing mechanism may be faulty, and you should contact Ubotie support.