You can connect two JBL speakers in two ways: pair them to each other so they play the same audio, or pair them both separately to your phone

The method you choose depends on what you want to do. If you want stereo sound or to fill a larger room with one audio source, you'll pair the speakers to each other through JBL's PartyBoost feature (or JBL Connect+ on newer models). If you want to play different things on each speaker, you'll keep them paired individually to your phone or device instead.

The pairing process itself is straightforward — it takes about two minutes and uses the same Bluetooth connection you already use to pair a single speaker. The main difference is that one speaker becomes the "host" and the other becomes the "secondary," and they communicate with each other rather than both talking directly to your phone.

Key Takeaways

  • PartyBoost (older JBL models) and JBL Connect+ (newer models) let two speakers pair with each other to play the same audio in stereo or mono.
  • To use PartyBoost, hold the Bluetooth button on the first speaker until you hear a tone, then hold it on the second speaker until they connect — no app needed.
  • JBL Connect+ requires the JBL app and works with newer speakers like the Flip 6, Charge 5, and Xtreme 3, but the pairing process is similar.
  • If you want to play different audio on each speaker, pair them both separately to your phone instead of using PartyBoost or Connect+.
  • Once paired together, the two speakers will automatically reconnect to each other when you turn them on, as long as they're within Bluetooth range.

Pairing two JBL speakers with PartyBoost (older models)

PartyBoost is the feature on older JBL speakers like the Flip 4, Charge 3, and Xtreme 2. To connect two speakers this way, turn on both speakers and make sure they're fully charged or plugged in — low battery can interrupt the pairing process.

On the first speaker, hold down the Bluetooth button (usually marked with a Bluetooth symbol) for about three to five seconds until you hear a tone or see a light flash. Release the button. On the second speaker, hold down the Bluetooth button for three to five seconds until you hear a tone. The two speakers will search for each other and connect within 10 to 15 seconds. You'll hear a confirmation tone on both speakers when they're paired.

Once they're connected, play audio on your phone or device — it will come through both speakers at the same time. If the pairing fails, turn both speakers off, wait 10 seconds, turn them back on, and try again.

Pairing two JBL speakers with JBL Connect+ (newer models)

Newer JBL speakers like the Flip 6, Charge 5, Xtreme 3, and PartyBox models use JBL Connect+ instead of PartyBoost. This feature requires the JBL app, which you can read free from the Apple App Store or Google Play Store.

read and open the JBL app, then turn on both speakers and make sure they're in pairing mode. On most newer JBL speakers, press and hold the power button until you see a flashing light. Open the app and tap the plus sign or "Add Speaker" button. The app will show you available speakers — select the first one, then the second one. The app will pair them together automatically.

Once they're connected through the app, you can control the volume and audio on both speakers from your phone. The speakers will stay paired to each other even after you close the app, and they'll reconnect automatically when you turn them on next time.

What happens when two JBL speakers are paired together

When two JBL speakers are paired using PartyBoost or Connect+, they become a single audio system. Audio from your phone plays on both speakers at the same time, which creates a fuller sound and lets you fill a larger space. The speakers don't need to stay close to each other — they just need to be within Bluetooth range, which is usually 30 to 50 feet depending on obstacles like walls.

The paired speakers will automatically reconnect to each other when you turn them on, as long as they're in range. You don't have to re-pair them every time. However, if you move one speaker far away or turn it off, it will disconnect from the other speaker. When you turn it back on and bring it back into range, it will reconnect on its own.

Pairing each speaker separately to your phone instead

If you want to play different audio on each speaker — for example, one playing music and one playing a podcast — don't use PartyBoost or Connect+. Instead, pair each speaker individually to your phone the way you normally would.

Turn on the first speaker, hold the Bluetooth button until it enters pairing mode (you'll see a flashing light), then go to your phone's Bluetooth settings and select the speaker's name. Once it's paired, turn on the second speaker, put it in pairing mode, and pair it to your phone as well. Your phone will now show both speakers in its Bluetooth settings. When you play audio, you can switch between them by tapping the speaker name in your phone's audio output menu, or some apps let you choose which speaker to use before you start playing.

This method doesn't create a stereo pair — each speaker plays independently. It's useful if you want to control what plays on each speaker separately, but it uses more of your phone's Bluetooth connection and can drain battery faster.

Troubleshooting when speakers won't pair together

If your two JBL speakers won't connect to each other, the most common cause is that one or both speakers are already paired to your phone. Unpair them from your phone first by going to your phone's Bluetooth settings, finding the speaker name, and tapping "Forget" or the remove button. Then try the PartyBoost or Connect+ process again.

Another common issue is that the speakers are too far apart. Move them closer together — within 10 feet — while you're pairing them. Once they're connected, you can move them farther apart if you want. If the speakers still won't pair, turn both completely off, wait 30 seconds, turn them back on, and try again. If one speaker has very low battery, charge it fully before attempting to pair.

If you're using JBL Connect+ and the app won't find your speakers, make sure the app has permission to use Bluetooth. On Android, go to Settings > Apps > JBL and turn on Bluetooth permission. On iPhone, go to Settings > Privacy > Bluetooth and make sure the JBL app is listed and enabled.

Switching between paired and unpaired mode

Once two speakers are paired together, they'll stay that way until you unpair them. To unpair them, put one speaker in pairing mode by holding the Bluetooth button for several seconds. This breaks the connection between the two speakers. You can then pair that speaker to your phone individually, or pair it to a different speaker.

If you're using JBL Connect+, open the app, find the paired speakers, and look for a "Disconnect" or "Remove" option. Tap it to unpair the speakers. After that, each speaker will work independently again.

Frequently Asked Questions

Can I pair more than two JBL speakers together?

PartyBoost and JBL Connect+ only pair two speakers at a time. If you want to connect more than two speakers, some JBL PartyBox models support connecting three or more speakers, but you'll need to check your specific model's manual. For most JBL speakers, two is the limit.

Do both speakers have to be the same model to pair them?

No. You can pair two different JBL speaker models together as long as they both support the same pairing feature — either both have PartyBoost or both support JBL Connect+. Mixing an older PartyBoost speaker with a newer Connect+ speaker usually won't work.

Will pairing two speakers drain the battery faster?

Yes, slightly. When two speakers are paired together, they're both transmitting and receiving Bluetooth signals, which uses more power than a single speaker. You may notice the battery drains 10 to 15 percent faster than normal, depending on volume and usage.

What if one speaker keeps disconnecting from the other?

This usually means one speaker is moving out of Bluetooth range or has low battery. Keep both speakers within 30 to 50 feet of each other and make sure both are fully charged. If disconnections keep happening, try moving the speakers closer together or away from sources of interference like microwaves or Wi-Fi routers.

Can I use my phone while two speakers are paired together?

Yes. Once the speakers are paired to each other, your phone just sends audio to the first speaker, and that speaker sends it to the second one. You can use your phone normally — make calls, use other apps, or lock the screen — and the audio will keep playing on both speakers.