The basic connection process
A Logitech wireless keyboard connects to your computer in one of two ways: through a small USB receiver that plugs into your computer, or through Bluetooth if your keyboard has that option. Most Logitech keyboards use the USB receiver method, which is simpler because the receiver handles all the pairing for you — you do not need to dig into your computer's settings.
The receiver is usually a small black or white stick about the size of a USB flash drive. It comes in the box with your keyboard. Plug it into any available USB port on your computer (front or back of a desktop, side of a laptop), then turn on the keyboard. The keyboard and receiver find each other automatically within a few seconds, and you should see the lights on the keyboard turn on or change color to show it is connected.
If your keyboard has a power button, make sure it is in the ON position. Some Logitech keyboards have a small switch on the bottom that toggles between ON and OFF. If the keyboard still does not respond after you turn it on, check that the batteries are installed correctly — the positive and negative ends should match the diagram inside the battery compartment.
Key Takeaways
- Logitech USB receiver keyboards pair automatically once you plug the receiver into your computer and turn on the keyboard — no manual pairing steps are needed.
- The receiver must stay plugged in whenever you use the keyboard, so keep it in a port you can leave occupied.
- Bluetooth Logitech keyboards require you to hold a pairing button on the keyboard and then select it from your computer's Bluetooth settings.
- If your keyboard does not respond, check that batteries are installed, the keyboard is turned on, and the receiver is fully inserted into the USB port.
- Logitech keyboards work with Windows, Mac, and Linux computers without installing extra software in most cases.
Connecting a Bluetooth Logitech keyboard
If your Logitech keyboard supports Bluetooth instead of a USB receiver, the pairing process is slightly different. Look for a small button on the bottom or back of the keyboard labeled "Pair," "Connect," or with a Bluetooth symbol. Press and hold this button for three to five seconds until you see a light on the keyboard blink or change color — this means the keyboard is now in pairing mode and searching for your computer.
On your computer, open the Bluetooth settings. On Windows, go to Settings > Devices > Bluetooth and other devices, then click "Add device" and select "Bluetooth." On a Mac, go to System Preferences > Bluetooth and click "Set Up New Device." Your computer will search for nearby Bluetooth devices. When you see your Logitech keyboard in the list, click it to pair.
Once paired, your keyboard should connect automatically whenever it is turned on and within range of your computer. If the keyboard does not appear in the Bluetooth list, press the pairing button again for a longer time — some Logitech keyboards need five to ten seconds — and make sure the keyboard is not already paired to another device.
What to do if the keyboard does not respond
If you plugged in the receiver or paired via Bluetooth but the keyboard still does not type, start with the simplest checks. Open the battery compartment on the bottom of the keyboard and remove the batteries, then reinsert them, making sure they are oriented correctly. Close the compartment and wait five seconds. If the keyboard has a power switch, toggle it off and back on.
Next, unplug the USB receiver from your computer and plug it into a different USB port. Sometimes a port is not working properly, or a port on the front of a desktop is not connected correctly to the motherboard. If you are using Bluetooth, turn the keyboard off, wait ten seconds, and turn it back on. Then try to pair it again from your computer's Bluetooth settings.
If the keyboard still does not work, check whether your computer recognizes it at all. On Windows, open Device Manager (right-click the Start button and select Device Manager), then look under "Keyboards" to see if your Logitech keyboard is listed. On a Mac, hold Option and click the Bluetooth icon in the menu bar to see connected devices. If the keyboard does not appear, the receiver may be faulty or the Bluetooth pairing did not complete. Try the pairing process one more time, or contact Logitech support with your keyboard model number.
Connecting multiple keyboards to one computer
You can connect more than one Logitech keyboard to the same computer, but each USB receiver keyboard needs its own receiver. If you have two Logitech keyboards with USB receivers, plug both receivers into your computer and turn on both keyboards. Each receiver will pair with its own keyboard automatically, and both will work at the same time.
For Bluetooth keyboards, you can pair multiple keyboards to one computer through your Bluetooth settings. Pair the first keyboard, then repeat the pairing process for the second keyboard. Your computer will remember both and connect to whichever one you turn on. However, only one keyboard can send input at a time — if you type on both simultaneously, your computer will only register keystrokes from one of them.
Moving the keyboard to a different computer
If you want to use the same Logitech USB receiver keyboard on a different computer, straightforward unplug the receiver from the first computer and plug it into the second. The keyboard will connect to the new computer automatically — no re-pairing is needed. The receiver remembers the keyboard, not the computer.
For Bluetooth keyboards, you will need to unpair from the first computer and pair with the second. On your first computer, go to Bluetooth settings and remove or forget the keyboard. Then on the second computer, follow the pairing steps described earlier. Some Logitech Bluetooth keyboards can remember multiple computers and will connect to whichever one is nearby and available, but you should check your keyboard's manual to see if it supports this feature.
Updating Logitech keyboard firmware
Most Logitech keyboards work without any software installed on your computer. However, Logitech offers an optional app called Logitech Options or Logi Options+ that lets you customize keys, adjust settings, and update the keyboard's firmware. Firmware is the software built into the keyboard itself that controls how it works.
If you want to check for firmware updates, read Logitech Options or Logi Options+ from Logitech's website. Install the app, plug in your keyboard or make sure it is paired via Bluetooth, and open the app. It will show you your keyboard and tell you if an update is available. If one is, follow the on-screen steps to install it. The update usually takes a few minutes and your keyboard will restart when it is done.
You do not need to update firmware for the keyboard to work — updates usually add new features or fix minor issues. If your keyboard is working fine, you can skip this step entirely.
Frequently Asked Questions
Can I use a Logitech keyboard without the receiver plugged in?
No, USB receiver keyboards need the receiver plugged in at all times to work. The receiver is what communicates between the keyboard and your computer. Bluetooth keyboards do not need a receiver, but they do need to be paired with your computer first and within Bluetooth range, which is typically 30 feet.
Why does my keyboard keep disconnecting?
For USB receiver keyboards, the receiver may be loose in the port or the port itself may be failing. Try a different USB port. For Bluetooth keyboards, interference from other wireless devices, low batteries, or being out of range can cause disconnections. Replace the batteries and move closer to your computer. If the problem continues, unpair and re-pair the keyboard.
Do I need to install software for my Logitech keyboard to work?
No. Logitech keyboards work with Windows, Mac, and Linux without any software. The Logitech Options app is optional and only needed if you want to customize keys or check for firmware updates. Your keyboard will type normally without it.
What if I lost the USB receiver?
You can order a replacement receiver from Logitech's website if you know your keyboard model number. The receiver is specific to your keyboard model, so make sure you order the correct one. Alternatively, if your keyboard supports Bluetooth, you can pair it via Bluetooth instead and skip the receiver entirely.
Can I pair a Logitech keyboard to a phone or tablet?
Yes, if your Logitech keyboard supports Bluetooth. Follow the same pairing steps on your phone or tablet as you would on a computer — go to Bluetooth settings, put the keyboard in pairing mode, and select it from the list. USB receiver keyboards only work with computers, not phones or tablets.