The basic pairing process for Beats Solo 3

To connect Beats Solo 3 to your phone, tablet, or computer, turn on the headphones and hold the power button for about 5 seconds until the LED light flashes red and blue. This puts the headphones into pairing mode. On your device, go to Bluetooth settings, find "Beats Solo3" in the available devices list, and tap it. The headphones will connect within a few seconds, and the LED will turn solid blue to show the connection is active.

Once you pair the headphones to a device for the first time, they will automatically reconnect to that same device whenever both are turned on and in range. You do not need to repeat the full pairing process each time — just turn on the headphones and they will find your phone or computer on their own.

Key Takeaways

  • Hold the power button for 5 seconds until the LED flashes red and blue to enter pairing mode on your Beats Solo 3.
  • Go to your device's Bluetooth settings and select "Beats Solo3" from the available devices list to complete the pairing.
  • After the first pairing, your headphones will reconnect automatically whenever you turn them on near that device.
  • If the headphones do not appear in your Bluetooth list, make sure they are charged and try restarting both the headphones and your device.
  • You can pair the same headphones to multiple devices, but they will only connect to one device at a time.

Pairing Beats Solo 3 to an iPhone or iPad

On an iPhone or iPad, swipe down from the top right corner to open Control Center. Tap and hold the Bluetooth icon in the upper left, which opens the full Bluetooth menu. Make sure Bluetooth is turned on — it should show a blue icon. Put your Beats Solo 3 into pairing mode by holding the power button for 5 seconds, then look for "Beats Solo3" in the list of available devices and tap it.

Your iPhone or iPad will show "Connecting" briefly, then display "Connected" next to the headphones name. You can now close Control Center and start using the headphones. If you see "Not Connected" or the headphones do not appear in the list, restart the headphones by turning them off and back on, then try again.

Pairing Beats Solo 3 to an Android phone or tablet

On Android, open Settings and tap "Connected devices" or "Bluetooth" — the exact name varies by manufacturer. Make sure Bluetooth is turned on. Put your Beats Solo 3 into pairing mode by holding the power button for 5 seconds until the LED flashes red and blue. Tap "Pair new device" or look for "Beats Solo3" in the list of available devices and tap it.

Android will show "Pairing" and then "Connected" once the headphones are linked. If the headphones do not show up, go back to the Beats Solo 3 and hold the power button again for another 5 seconds to re-enter pairing mode. Some Android devices ask you to confirm a pairing code — if you see this, just tap "Pair" to accept.

Pairing Beats Solo 3 to a Mac or Windows computer

On a Mac, click the Bluetooth icon in the menu bar at the top of the screen, or go to System Settings, then Bluetooth. Make sure Bluetooth is turned on. Put your Beats Solo 3 into pairing mode by holding the power button for 5 seconds. Look for "Beats Solo3" in the list of available devices and click it.

On Windows 10 or 11, go to Settings, then "Devices," then "Bluetooth and other devices." Make sure Bluetooth is turned on. Put your Beats Solo 3 into pairing mode, then click "Add device" and select "Bluetooth." Find "Beats Solo3" in the list and click it to pair. Your computer will show "Connected" once the pairing is complete.

What to do if the headphones will not pair

If your Beats Solo 3 do not appear in your device's Bluetooth list, first check that the headphones have enough battery. A low battery can prevent pairing mode from working. Charge the headphones for at least 15 minutes using the included USB cable, then try again.

If the headphones still do not show up, restart both devices. Turn off the Beats Solo 3 completely by holding the power button for 10 seconds until the LED turns off. Turn off your phone or computer's Bluetooth, wait 10 seconds, then turn Bluetooth back on. Put the headphones into pairing mode again by holding the power button for 5 seconds. This clears any stuck connection and usually solves the problem.

If you have already paired these headphones to another device, they may still be trying to connect to that device instead. Turn off Bluetooth on the other device, or go into its Bluetooth settings and "forget" or "unpair" the Beats Solo3. Then try pairing to your current device again.

Switching the headphones between multiple devices

You can pair your Beats Solo 3 to as many devices as you want, but the headphones will only play audio from one device at a time. When you turn on the headphones, they will automatically connect to whichever device you used them with most recently.

To switch to a different device, turn off Bluetooth on the device the headphones are currently connected to, or move far enough away that the connection drops. Then turn on Bluetooth on the device you want to use, and the headphones will connect to it automatically. You do not need to re-pair — the headphones remember all the devices you have paired them with.

If the headphones do not automatically switch, open the Bluetooth settings on your new device and manually tap or click "Beats Solo3" to connect. This forces the headphones to disconnect from the old device and connect to the new one.

Frequently Asked Questions

Why do my Beats Solo 3 keep disconnecting?

Disconnections usually happen when the headphones are too far from your device — Bluetooth typically works within 30 feet. Move closer to your phone or computer. If the problem continues, restart both the headphones and your device, and check that your device's Bluetooth is fully turned on, not just in range mode.

Can I pair my Beats Solo 3 to two devices at the same time?

No, the headphones can only play audio from one device at a time. However, you can pair them to multiple devices and switch between them by turning Bluetooth on or off on each device. The headphones will automatically reconnect to whichever device you use them with most recently.

What if I forgot which device my Beats Solo 3 are paired to?

Put the headphones into pairing mode by holding the power button for 5 seconds. They will show up in the Bluetooth list of any device nearby. Tap or click the name to connect. If you want to completely erase all pairings and start fresh, hold the power button for 10 seconds until the LED flashes red, then release — this resets the headphones to factory settings.

Do I need to pair my Beats Solo 3 every time I use them?

No. After the first pairing, the headphones will automatically reconnect to that device whenever you turn them on and Bluetooth is enabled. You only need to manually pair them once per device, or if you reset the headphones to factory settings.