The basic connection process for Beats

Connecting to Beats headphones works the same way as any other Bluetooth device: turn on the headphones, put them in pairing mode, then select them from your phone or computer's Bluetooth menu. Most Beats enter pairing mode automatically the first time you power them on. After that first connection, they remember your device and connect automatically when both are turned on and in range.

The exact steps depend on whether you're using an iPhone, Android phone, Mac, or Windows computer. The pairing process itself is identical across all of them — the difference is just where you find the Bluetooth settings on each device.

Key Takeaways

  • New Beats headphones enter pairing mode automatically when powered on for the first time, and you select them from your device's Bluetooth settings to complete the connection.
  • After the first pairing, Beats reconnect automatically whenever both devices are powered on and within Bluetooth range (typically 30 feet).
  • If Beats don't appear in your Bluetooth list, hold the power button for 10 seconds until the LED light flashes, which forces them back into pairing mode.
  • You can pair one set of Beats with multiple devices, but they can only play audio from one device at a time.
  • If your Beats connect to the wrong device, forget them from that device's Bluetooth settings, then reconnect to the device you want to use.

Connecting Beats to an iPhone or iPad

Open Settings on your iPhone or iPad, then tap Bluetooth. Make sure Bluetooth is turned on — the toggle should be blue. Your Beats should appear in the list of available devices within a few seconds. Tap the name of your Beats to connect. Once connected, you'll see a checkmark next to the Beats name and a small Bluetooth icon in the status bar at the top of your screen.

If your Beats don't appear in the list, they may not be in pairing mode. Hold down the power button on the headphones for about 10 seconds until you see the LED light flash white and red alternately. This forces them into pairing mode. Wait a few seconds, then check your iPhone's Bluetooth list again.

Connecting Beats to an Android phone

Open Settings on your Android phone and look for Bluetooth or Connected Devices — the exact name varies by phone maker. Turn Bluetooth on if it's not already enabled. Your Beats should appear under "Available devices" within a few seconds. Tap the Beats name to connect. Once paired, they'll show as "Connected" instead of "Available."

Some Android phones show a pairing request on screen after you tap the Beats name. If you see this, tap "Pair" to confirm. If your Beats don't show up, hold the power button for 10 seconds until the light flashes, then check the available devices list again.

Connecting Beats to a Mac

Click the Bluetooth icon in the menu bar at the top of your screen, or go to System Settings, then Bluetooth. Make sure Bluetooth is on. Your Beats should appear in the list within a few seconds. Click the name of your Beats to connect. You may see a pairing request — click "Connect" if prompted.

If the Bluetooth icon isn't visible in your menu bar, open System Settings, click General, then click About. Look for the Bluetooth icon in the top-right corner of the window. If you still don't see your Beats, put them in pairing mode by holding the power button for 10 seconds until the light flashes.

Connecting Beats to a Windows computer

Click the Bluetooth icon in the system tray at the bottom-right of your screen, or go to Settings, then Bluetooth & Devices. Make sure Bluetooth is turned on. Click "Add device" or "Add a new device," then select Bluetooth from the menu. Your Beats should appear in the list within a few seconds. Click the Beats name to connect.

Windows may ask you to confirm the pairing. If your Beats don't appear, hold the power button for 10 seconds until the LED flashes, then click "Add device" again. Some Windows computers require you to enter a PIN to complete pairing — if prompted, try 0000 or 1234, which are the most common defaults for Beats.

What to do when Beats won't connect or keep disconnecting

If your Beats connect but then disconnect repeatedly, the problem is usually that they're trying to connect to multiple devices at once. Forget the Beats from all devices except the one you want to use. On iPhone or Mac, go to Bluetooth settings, find the Beats name, click the information icon next to it, and select "Forget This Device." On Android, go to Bluetooth settings, tap the gear icon next to the Beats name, and select "Unpair." On Windows, go to Bluetooth settings, find the Beats, click it, then click "Remove device."

After forgetting them from all devices, put the Beats in pairing mode again by holding the power button for 10 seconds, then pair them only with the device you want to use. Once that connection is stable, you can pair them with other devices one at a time if needed.

If Beats still won't connect after forgetting and re-pairing, try turning off Bluetooth on your device for 10 seconds, then turning it back on. If that doesn't work, power off the Beats completely, wait 30 seconds, then power them back on and try pairing again.

Pairing Beats with multiple devices

You can pair one set of Beats with as many devices as you want — phone, tablet, computer, and so on. However, Beats can only play audio from one device at a time. When you want to switch which device is using the Beats, straightforward start playing audio on the new device. The Beats will automatically disconnect from the old device and connect to the new one.

If the automatic switch doesn't happen, manually disconnect the Beats from the first device's Bluetooth settings, then play audio on the second device. The Beats will connect to whichever device is actively trying to send them sound.

Frequently Asked Questions

Why do my Beats keep connecting to the wrong device?

Beats connect to whichever paired device is closest and has Bluetooth turned on. If you have multiple devices in the same room, they may connect to the wrong one. Forget the Beats from the devices you don't want to use, or turn off Bluetooth on those devices when you're using a different one.

Can I use Beats with two devices at the same time?

No. Beats can only play audio from one device at a time. If you want to switch between devices, you have to manually start playing audio on the new device, and the Beats will disconnect from the old one.

How far away can my device be before Beats disconnect?

Bluetooth typically works within about 30 feet in open space. Walls, metal objects, and other wireless devices can reduce this range. If you move too far away, the Beats will disconnect, but they'll reconnect automatically when you come back in range.

Do I have to pair my Beats every time I use them?

No. After the first pairing, your Beats remember your device. straightforward turn on the Beats and your device's Bluetooth, and they'll connect automatically. You only need to pair again if you forget the Beats from your device's Bluetooth settings or if you're connecting to a new device for the first time.

What does the LED light on my Beats mean?

A solid white light means the Beats are powered on and connected. A flashing white and red light means they're in pairing mode. A red light means the battery is low. If the light doesn't turn on at all, the Beats may need to be charged.