The basic steps to pair a Sony speaker
To connect your phone or computer to a Sony speaker, you put the speaker into pairing mode, then tell your device to look for it and select it from the list. The speaker will remember your device after the first time, so you won't have to repeat these steps every time you want to use it — just turn both devices on and they'll reconnect on their own.
The exact steps depend on which Sony speaker model you own and whether you're connecting an iPhone, Android phone, Mac, or Windows computer. But the core process is the same: make the speaker discoverable, find it on your device, and confirm the connection.
Key Takeaways
- Put your Sony speaker into pairing mode by holding the Bluetooth button (usually marked with a Bluetooth symbol) for 3 to 5 seconds until you see a flashing light or hear a tone.
- On your phone or computer, open Bluetooth settings, look for your speaker's model name in the list of available devices, and tap or click to connect.
- Once paired, your device will automatically reconnect to the speaker when both are turned on and within range — you don't need to pair again.
- If pairing fails, restart both the speaker and your device, then try again from the beginning.
- Sony speakers can usually remember multiple devices, but will only play audio from one at a time.
Finding the pairing button on your Sony speaker
Most Sony speakers have a button marked with the Bluetooth symbol (a stylized "B" made of dots). On smaller models like the SRS-XB13 or SRS-XE200, this button is usually on the top or side of the speaker. On larger models like the SRS-RA5000, it may be on the back panel.
If you can't find a dedicated Bluetooth button, check your speaker's manual — some models use a multi-function button that you hold down to enter pairing mode. The manual will tell you exactly which button and how long to hold it. You can find Sony speaker manuals on Sony's support website by searching for your model number.
The model number is usually printed on the bottom or back of the speaker. It starts with "SRS-" followed by letters and numbers.
Putting your Sony speaker into pairing mode
Hold down the Bluetooth button for 3 to 5 seconds. You'll see one of these signs that pairing mode is active: a blue light that flashes on and off, a tone or beep, or both. Some Sony speakers also announce "Bluetooth pairing" in a voice.
Pairing mode usually stays active for about 3 minutes. If your device doesn't find the speaker within that time, the speaker will exit pairing mode and you'll need to press the button again. This is normal — just repeat the process.
While the speaker is in pairing mode, keep it within 3 to 6 feet of the device you're connecting. Walls, metal objects, and other electronics can interfere with the signal, so move to an open area if pairing fails the first time.
Finding and selecting your speaker on your device
| Device Type | Where to Find Bluetooth Settings |
|---|---|
| iPhone or iPad | Settings > Bluetooth, then toggle Bluetooth on |
| Android phone | Settings > Connected devices > Bluetooth, then toggle on |
| Mac | System Settings > Bluetooth |
| Windows 10 or 11 | Settings > Bluetooth & devices > Bluetooth |
Once you open Bluetooth settings and toggle Bluetooth on, your device will scan for nearby speakers. Your Sony speaker should appear in the list within 10 to 15 seconds. It will show up under its model name — for example, "SRS-XB13" or "Sony SRS-RA5000".
Tap or click on your speaker's name. Your device will send a connection request to the speaker. On some Sony models, you may see a prompt on the speaker itself asking you to confirm the connection — if so, press the Bluetooth button once to confirm.
Once connected, you'll see a checkmark or "Connected" label next to the speaker's name in your Bluetooth settings. You can now play audio through the speaker.
What to do if your speaker doesn't appear in the list
If you don't see your Sony speaker after 30 seconds of scanning, the speaker may not be in pairing mode. Go back to the speaker and hold the Bluetooth button again for 3 to 5 seconds, watching for the flashing light or tone. Then return to your device and tap the refresh or scan button (usually a circular arrow icon) in Bluetooth settings.
If the speaker still doesn't appear, restart both devices. Turn off the speaker completely, wait 10 seconds, and turn it back on. Then restart your phone or computer. Once both are back on, put the speaker into pairing mode again and scan from your device.
If you've tried this twice and the speaker still won't appear, the speaker's Bluetooth radio may need to be reset. Check your speaker's manual for a factory reset procedure — this usually involves holding down a specific button combination for 10 to 15 seconds. A factory reset will erase all previously paired devices, so you'll need to pair everything again afterward.
Reconnecting after the first pairing
After you've paired your Sony speaker with a device once, you don't need to repeat the pairing process. The next time you turn on both the speaker and your phone or computer, they'll reconnect automatically within 10 to 30 seconds — as long as they're within range (usually 30 feet in an open room, less through walls).
You'll know they've reconnected when you see the Bluetooth symbol appear in your device's status bar and the speaker's light stops flashing. If they don't reconnect automatically, open Bluetooth settings on your device and tap the speaker's name once — it should connect when ready.
If your device connects to a different speaker by mistake, go to Bluetooth settings, find your Sony speaker, and tap "Forget This Device" or "Unpair". Then turn the speaker off and back on, and it will reconnect to your device as the primary speaker.
Pairing multiple devices to the same speaker
Most Sony speakers can remember up to 8 different devices. To add a second device, put the speaker into pairing mode again (hold the Bluetooth button for 3 to 5 seconds) and follow the same steps on the new device. The speaker will add it to its memory without forgetting the first device.
However, the speaker can only play audio from one device at a time. If you have two phones connected and both try to play music, the speaker will usually play from whichever device connected most recently, or you may hear nothing. To switch which device is playing, pause audio on the first device and start playing on the second.
If you want to remove a device from the speaker's memory, check your speaker's manual for a "clear pairing" or "reset pairing list" option. Some models require you to hold a button combination for 10 seconds; others have a menu option in a companion app.
Frequently Asked Questions
Why does my Sony speaker keep disconnecting?
The most common cause is that your phone or computer moved out of range, or another device connected to the speaker in the meantime. Move closer to the speaker and check that no other devices are trying to play audio. If disconnections happen even when you're close by, restart both devices and re-pair them. Interference from Wi-Fi routers or microwaves can also cause drops — try moving the speaker away from these devices.
Can I use my Sony speaker with multiple phones at the same time?
Your speaker can remember multiple phones, but it will only play audio from one at a time. If two phones are both connected and both trying to play music, the speaker will usually play from the one that connected most recently. To switch, pause the first phone and start playing on the second.
What if I forgot which device my speaker is paired with?
Put the speaker into pairing mode and scan from your phone or computer. If your device appears in the list and connects without asking for a PIN, it's already paired. If it asks for a PIN, the speaker has been reset or paired with a different device. Check your speaker's manual for the default PIN, which is usually 0000 or 1234.
Do I need to unpair my speaker before selling it?
Yes. Perform a factory reset on the speaker to erase all paired devices and personal settings. The exact steps vary by model, but usually involve holding down a button combination for 10 to 15 seconds until you hear a tone or see a light pattern. Check your manual for the specific procedure for your model.
Why is the sound cutting out or crackling?
This usually means interference or a weak signal. Move the speaker closer to your device, away from Wi-Fi routers, microwaves, or other wireless devices. If the problem persists, restart both the speaker and your device, then re-pair them. If one specific device always has this problem but others don't, forget the speaker on that device and pair it again.