The basic pairing process for Beats

Connecting Beats wireless headphones to your phone, computer, or tablet takes about two minutes the first time, then happens automatically after that. Turn on your Beats, hold the power button until the LED light flashes (usually 10 to 15 seconds), then open your device's Bluetooth settings and tap the Beats model name when it appears. Your device will confirm the connection, and you're done — the headphones will reconnect to that device every time you turn them on from then on.

The exact steps differ slightly between iPhones, Android phones, Windows computers, and Macs, but the principle is the same: put the headphones in pairing mode, find them in your device's Bluetooth menu, and select them. Once paired, you don't need to repeat this process unless you reset the headphones or pair them with a different device.

Key Takeaways

  • Hold the power button on your Beats for 10 to 15 seconds until the LED flashes white, which puts them in pairing mode.
  • On your phone or computer, open Bluetooth settings and select your Beats model name from the list of available devices.
  • After the first pairing, your Beats will reconnect automatically whenever you turn them on near that device.
  • If your Beats don't appear in the Bluetooth list, make sure they're charged, the power is on, and you're holding the button long enough to trigger pairing mode.
  • You can pair the same Beats to multiple devices, but they will only connect to one device at a time.

Pairing Beats with an iPhone or iPad

On an iPhone or iPad, go to Settings, tap Bluetooth, and make sure it's turned on. Your Beats should appear in the list of available devices within a few seconds of entering pairing mode. Tap the Beats model name, and your device will show "Connected" underneath it. You may see a popup asking to name the device or confirm the pairing — tap "Done" or "Confirm" to finish.

If you have multiple Apple devices (iPhone, iPad, Mac), your Beats will remember all of them. When you turn on your Beats near any of those devices, they'll connect to whichever one you used most recently. You can manually switch which device they're connected to by opening Bluetooth settings on a different device and tapping your Beats again.

Pairing Beats with an Android phone

On Android, open Settings, go to Bluetooth, and turn it on if it's not already. Make sure your Beats are in pairing mode (LED flashing), and they should appear under "Available devices" within a few seconds. Tap the Beats model name to pair them. Some Android phones will ask you to confirm the pairing on both the phone and the headphones — if you see a prompt on your Beats, press the button to confirm.

Android devices don't always reconnect as smoothly as iPhones do, so if your Beats don't connect automatically when you turn them on, open Bluetooth settings and tap them again. This usually takes less than five seconds. If they still don't appear, make sure Bluetooth is on and the headphones are charged.

Pairing Beats with a Mac or Windows computer

On a Mac, click the Bluetooth icon in the menu bar (top right of the screen), make sure Bluetooth is on, and wait for your Beats to appear in the list. Click the Beats model name to pair. On Windows, go to Settings, select Devices, click Bluetooth, and turn it on. Your Beats should appear under "Other devices" — click them to pair.

Computers sometimes take longer to discover Bluetooth devices than phones do, so if your Beats don't show up right away, wait 10 to 15 seconds and refresh the Bluetooth list. On Windows, you can also click "Add Bluetooth or other device" at the top of the Bluetooth settings page to manually search for them. Once paired, your Beats will reconnect automatically when you turn them on near the computer.

What to do if your Beats won't appear in the Bluetooth list

If you've held the power button for 15 seconds and the LED is flashing but your Beats still don't show up, try these steps in order: first, make sure Bluetooth is turned on on your device. Second, move your Beats closer to your phone or computer — Bluetooth has a range of about 30 feet, but pairing works better within 10 feet. Third, restart your device's Bluetooth by turning it off and back on in settings.

If that doesn't work, reset your Beats by holding the power button for 15 seconds even after the LED starts flashing, then keep holding for another 5 seconds until the light turns off completely. Release the button, wait a few seconds, then hold it again until the LED flashes white. This clears all previous pairings and puts the headphones in pairing mode fresh. Try pairing again with your device.

If your Beats still won't pair after a reset, check that they're charged — a low battery can prevent pairing. Plug them in for at least 15 minutes, then try again. If they're still not working, there may be a hardware issue, and you should contact Beats support or the retailer where you bought them.

Switching your Beats between devices

Once your Beats are paired to multiple devices, you can switch between them without unpairing. Turn off Bluetooth on the device they're currently connected to, then turn on Bluetooth on the device you want to use. Your Beats will connect to the new device within a few seconds. You don't need to hold the power button or do anything on the headphones themselves.

If you want to remove a device from your Beats' memory completely — for example, if you're selling your old phone — go to your Beats' Bluetooth settings on that device and select "Forget" or "Remove". Then hold the power button on your Beats for 15 seconds to reset them, and they'll no longer try to connect to that device.

Why your Beats keep disconnecting

If your Beats connect fine at first but then drop the connection, the most common cause is that Bluetooth is turned off on your device or the headphones are out of range. Check that Bluetooth is still on in your device's settings. If you've walked far from your phone or computer, move back within 30 feet and the connection should resume.

Another common issue is that your Beats are trying to connect to multiple devices at once. If you have your Beats paired to both your phone and your computer, and both have Bluetooth on, the headphones might switch between them or disconnect entirely. Turn off Bluetooth on devices you're not actively using, or go into Bluetooth settings and "forget" devices you don't use regularly. Keeping only one or two active pairings usually solves this problem.

Frequently Asked Questions

Do I have to pair my Beats every time I use them?

No. After the first pairing, your Beats will reconnect automatically whenever you turn them on near a device they've been paired with. You only need to pair them once per device, unless you reset the headphones or clear the pairing from your device's Bluetooth settings.

Can I use my Beats with more than one device at the same time?

Your Beats can be paired to multiple devices, but they can only play audio from one device at a time. If you want to switch from your phone to your computer, you'll need to pause audio on your phone first, then the Beats will connect to your computer. Some newer Beats models support "multipoint" pairing, which lets them stay connected to two devices and switch automatically — check your model's specifications to see if yours has this feature.

What does the LED light mean on my Beats?

A white flashing LED means your Beats are in pairing mode and ready to connect. A solid light (usually white or blue) means they're connected to a device. A red light or blinking red light usually means the battery is low. If the light is off, the headphones are either powered off or the battery is completely dead.

Why won't my Beats connect to my computer but they work fine with my phone?

Computers sometimes have stricter Bluetooth requirements than phones. Make sure your computer's Bluetooth is turned on and up to date — on Windows, check for driver updates in Device Manager, and on Mac, restart your computer. Also try forgetting the Beats from your computer's Bluetooth settings and pairing them again from scratch. If your computer is very old, it may not support the Bluetooth version your Beats use.

Can I pair my Beats to someone else's device?

Yes. Hold the power button on your Beats for 15 seconds to reset them and clear all previous pairings, then follow the pairing steps on the other person's device. Your Beats will now be paired to their device instead of yours. To pair them back to your device later, just put them in pairing mode again and select them in your Bluetooth settings.