The connection method depends on which iPad and stylus you own

Most styluses connect to an iPad in one of two ways: Apple Pencil models pair through a magnetic slot or Bluetooth, while third-party styluses almost always use Bluetooth. The exact steps change based on which generation of Apple Pencil you have, or whether you're using a different brand entirely. Before you start, check what stylus you own — the name is usually printed on the barrel or in your product box.

If you have an Apple Pencil, the connection is often automatic the moment you attach it magnetically to the iPad. If you have a third-party stylus or an older Apple Pencil model, you'll need to open the Bluetooth settings and pair it manually. Either way, the process takes less than a minute once you know which steps explore to your hardware.

Key Takeaways

  • Apple Pencil (1st and 2nd generation) pair through Bluetooth, while newer iPad Pro models with Apple Pencil Pro use a magnetic connection that pairs automatically.
  • Third-party styluses require manual Bluetooth pairing through your iPad's Settings app under Bluetooth.
  • Your iPad must have Bluetooth turned on before you attempt to pair any stylus.
  • Once paired, most styluses stay connected to that iPad and don't need to be paired again unless you reset the stylus or iPad.

Pairing an Apple Pencil (1st generation)

The original Apple Pencil pairs through Bluetooth and requires a few manual steps. First, turn on your iPad and open the Settings app. Tap Bluetooth and make sure the toggle is switched on — you'll see a blue switch if it's active.

Now hold your Apple Pencil near the iPad. You should see "Apple Pencil" appear in the list of available devices under "Other Devices". Tap it. A pairing dialog will pop up asking you to confirm — tap Pair. Within a few seconds, Apple Pencil will move to the "My Devices" section and show as connected. You're done; the stylus is now ready to use in any compatible app.

Pairing an Apple Pencil (2nd generation)

The 2nd generation Apple Pencil pairs differently because it attaches magnetically to the side of newer iPad Pro and iPad Air models. When you snap it onto the magnetic strip along the edge of the iPad, pairing happens automatically — you don't need to open Settings at all. The first time you attach it, a small notification appears on screen confirming the connection.

If the automatic pairing doesn't happen, open Settings, tap Bluetooth, and make sure Bluetooth is on. Then detach the stylus and reattach it. If it still doesn't appear, restart your iPad and try again. Restarting clears temporary Bluetooth glitches that sometimes prevent automatic pairing.

Pairing an Apple Pencil Pro

The Apple Pencil Pro works the same way as the 2nd generation — it pairs automatically when you attach it magnetically to an iPad Pro (7th generation or later) or iPad Air (6th generation or later). straightforward snap it onto the side of the iPad and wait for the confirmation notification. No Settings menu needed.

The Apple Pencil Pro also supports additional gestures like squeeze and barrel roll, but these work automatically once the stylus is paired. You don't need to configure them separately.

Pairing a third-party stylus through Bluetooth

Third-party styluses — brands like Logitech, Samsung, or Wacom — pair through the standard Bluetooth menu. First, make sure your stylus is charged and turned on. Most third-party styluses have a power button or a switch on the barrel; check your product manual if you're unsure.

On your iPad, open Settings and tap Bluetooth. Make sure the toggle is on. Press and hold the power button on your stylus for 3 to 5 seconds until you see a light blink or flash — this puts the stylus into pairing mode. Within a few seconds, the stylus name should appear in the "Other Devices" list. Tap it, then tap Pair on the confirmation dialog. Once it moves to "My Devices", the connection is complete.

If the stylus doesn't appear in the list, try holding the power button longer — some models require 10 seconds or more. If it still doesn't show up, restart your iPad and try again. Occasionally a stylus needs a full restart to enter pairing mode correctly.

What to do if your stylus won't connect

The most common reason a stylus fails to pair is that Bluetooth is turned off on the iPad. Check Settings > Bluetooth and confirm the toggle is blue and switched on. If Bluetooth is already on, turn it off, wait 10 seconds, and turn it back on — this resets the Bluetooth radio and often fixes connection problems.

If you're trying to pair a third-party stylus and it still won't appear, check whether the stylus is in pairing mode. Most styluses only stay in pairing mode for 30 to 60 seconds, so if you wait too long after pressing the power button, you'll need to press it again. Also verify that the stylus is charged — a dead battery prevents pairing.

For Apple Pencil models, if automatic pairing isn't working, restart your iPad completely. Hold the top and bottom buttons until you see the power-off slider, then slide to power off. Wait 30 seconds, then press the top button to turn it back on. After the restart, attach or hold the stylus near the iPad again.

Checking that your stylus is actually connected

Once pairing is complete, you can verify the connection in Settings. Open Settings, tap Bluetooth, and look for your stylus name under "My Devices". If it's listed there and shows "Connected" next to it, the pairing worked. If it shows "Not Connected", tap the stylus name and select "Forget This Device", then pair it again from scratch.

You can also test the connection by opening any drawing app — Notes, Procreate, Adobe Fresco, or any other app that supports stylus input. Tap the screen with the stylus tip. If the app responds and draws a line, the stylus is working. If nothing happens, the pairing may not have completed successfully, and you should repeat the pairing steps.

Frequently Asked Questions

Do I need to pair my stylus every time I use my iPad?

No. Once paired, a stylus stays connected to that iPad. You only need to pair it once. If you turn off your iPad or the stylus, they reconnect automatically when you turn them back on — you don't repeat the pairing process.

Can I use the same stylus with multiple iPads?

Yes, but you have to pair it separately with each iPad. A stylus can be paired with more than one device, though it only connects to one at a time. If you switch to a different iPad, you may need to manually select the stylus in Bluetooth settings or straightforward hold it near the new iPad and wait for it to reconnect.

What if my stylus pairs but doesn't actually draw on the screen?

First, check that the app you're using supports stylus input — not all apps do. Open a drawing app like Notes or Procreate to test. If the stylus still doesn't draw, unpair it completely by going to Settings > Bluetooth, tapping the stylus name, and selecting "Forget This Device". Then pair it again from the beginning. If it still doesn't work after re-pairing, the stylus may have a hardware problem.

Why does my stylus keep disconnecting?

Frequent disconnections usually mean the stylus battery is low or the Bluetooth connection is being interrupted by other devices. Charge the stylus fully and move away from other Bluetooth devices like speakers or headphones. If disconnections continue, restart your iPad and re-pair the stylus. Persistent disconnection after that suggests a hardware fault with either the stylus or iPad.

Is there a difference between pairing and connecting?

Yes. Pairing is the one-time setup where your iPad learns about the stylus and stores its information. Connecting is what happens each time the stylus and iPad find each other and start communicating. Once paired, they connect automatically whenever both are turned on and in range.