The basic connection process for Soundcore headphones

Soundcore headphones connect through Bluetooth the same way any other wireless headset does — your headphones broadcast a signal, your device listens for it, and once they find each other they stay paired until you unpair them or connect to something else. The first time you connect, you'll put the headphones into pairing mode, then select them from your device's Bluetooth menu. After that, they'll reconnect automatically when you turn them on.

Most Soundcore models enter pairing mode by holding the power button for 5 to 10 seconds until you see a flashing light (usually blue or white). Some models have a dedicated pairing button instead — check the manual for your specific model. Once the light is flashing, go to your device's Bluetooth settings, look for the headphones in the available devices list, and tap to connect.

The whole process takes about a minute. If your headphones don't show up in the list, make sure Bluetooth is turned on, the headphones are charged, and you're holding the pairing button long enough. If they still don't appear after 30 seconds, restart both the headphones and your device.

Key Takeaways

  • Hold the power button or pairing button for 5 to 10 seconds until the light flashes, then select the headphones from your device's Bluetooth menu.
  • After the first connection, your headphones will reconnect automatically when you turn them on, as long as Bluetooth is enabled on your device.
  • If the headphones don't appear in your Bluetooth list, check that both devices are charged, Bluetooth is on, and you're holding the button long enough.
  • You can connect most Soundcore headphones to multiple devices, but they only play audio from one at a time.

Connecting to phones and tablets

On an iPhone, go to Settings, tap Bluetooth, make sure it's on, then hold your Soundcore headphones' power button until the light flashes. The headphones should appear under "Other Devices" within 10 seconds. Tap the name to connect. Once paired, they'll show under "My Devices" and reconnect whenever you turn them on and Bluetooth is on.

On Android, the process is nearly identical: open Settings, go to Bluetooth, turn it on, then hold the headphones' power button until they enter pairing mode. Look for them in the list of available devices and tap to connect. Some Android phones also let you connect through the Quick Settings panel — swipe down twice from the top and long-press the Bluetooth icon.

If you're switching between a phone and a tablet, you don't need to unpair the headphones from the first device. Just turn off Bluetooth on the first device, then turn on Bluetooth on the second device and the headphones will connect to whichever one is actively looking for them. If both devices have Bluetooth on, the headphones will stay connected to whichever one they paired with most recently.

Connecting to computers and laptops

On Windows, click the Windows icon, type "Bluetooth settings," and open it. Make sure Bluetooth is on, then hold your Soundcore headphones' power button until the light flashes. Click "Add device," select "Bluetooth," and wait for the headphones to appear in the list. Click them to connect.

On Mac, go to System Preferences (or System Settings on newer versions), click Bluetooth, and make sure it's on. Put your headphones into pairing mode and they should appear in the list within 10 seconds. Click "Connect" next to the headphones' name. After that, they'll reconnect automatically when you turn them on and Bluetooth is enabled.

If your computer doesn't see the headphones, try moving them closer to the computer — Bluetooth has a range of about 30 feet, but walls and interference can reduce that. Also check that no other device is actively trying to connect to the headphones at the same time, as this can prevent your computer from finding them.

Reconnecting after the first pairing

Once your Soundcore headphones are paired with a device, they'll reconnect automatically the next time you turn them on, as long as Bluetooth is enabled on that device. You don't need to hold any buttons or go through the pairing menu again. Just power on the headphones and they'll search for the last device they were connected to.

If the headphones don't reconnect after 30 seconds, check that Bluetooth is actually on — it's straightforward to accidentally turn it off without realizing. If Bluetooth is on but the headphones still won't connect, try turning the headphones off and back on. If that doesn't work, restart your device.

If you want to connect the headphones to a different device, you can usually just turn on Bluetooth on the new device and the headphones will connect to it instead. However, some Soundcore models prioritize the device they were most recently paired with, so you may need to turn off Bluetooth on the old device first to force the headphones to connect to the new one.

Troubleshooting connection problems

If your Soundcore headphones won't enter pairing mode, the most common cause is that they're already paired with another device. Try turning off Bluetooth on all your other devices, then hold the power button on the headphones for 10 to 15 seconds. Some models require you to hold the button even longer — up to 20 seconds — to force them into pairing mode when they're already connected.

If the headphones appear in your Bluetooth list but won't actually connect, try "forgetting" them first. On your device, go to Bluetooth settings, find the headphones in your paired devices list, and select "Forget" or "Remove." Then put the headphones back into pairing mode and connect them again as if it were the first time.

If the connection keeps dropping, move closer to your device — Bluetooth signals weaken with distance and obstacles. Also check for interference from other wireless devices like microwaves, routers, or cordless phones, which can disrupt the connection. If interference is the problem, moving your device away from the source usually fixes it.

If the headphones connect but produce no sound, check your device's volume and make sure the headphones are selected as the audio output. On phones and tablets, this usually happens automatically, but on computers you may need to go into sound settings and select the headphones manually. Also make sure the headphones themselves are turned up — they have their own volume control separate from your device's volume.

Connecting to multiple devices

Most Soundcore headphones can be paired with up to 8 different devices at once, though they can only play audio from one device at a time. This means you can pair them with your phone, tablet, laptop, and smartwatch all at once, and switch between them by straightforward playing audio on whichever device you want to use.

To add a new device to your paired list without removing the old ones, just put the headphones into pairing mode and connect from the new device. The headphones will remember all the devices you've paired with. If you want to remove a device from the list, go to your device's Bluetooth settings, find the headphones, and select "Forget" or "Remove."

If you want to connect to a device that's not in your paired list, you'll need to put the headphones back into pairing mode. Some Soundcore models do this automatically if they can't find any of their previously paired devices, but others require you to hold the button manually. Check your model's manual to be sure.

Resetting your Soundcore headphones

If your headphones are having persistent connection problems, a factory reset will clear all paired devices and restore them to their original settings. Most Soundcore models reset by holding the power button for 15 to 20 seconds until the light flashes a specific color — usually red and blue alternating, or a rapid white flash. The exact timing varies by model, so check your manual.

After a reset, the headphones will no longer be paired with any device. You'll need to put them into pairing mode and connect them again from scratch. A reset is useful if the headphones are stuck trying to reconnect to a device you no longer use, or if they're behaving erratically.

Before you reset, make sure the headphones are charged — a reset on a low battery can sometimes fail or cause other problems. Also note that resetting will erase any custom settings you've configured in the Soundcore app, if your model has one.

Frequently Asked Questions

How long does it take for Soundcore headphones to pair?

The first pairing usually takes 30 seconds to a minute from the moment you put the headphones into pairing mode. Reconnecting to a device they've already paired with is faster — usually 5 to 10 seconds after you turn them on. If it takes longer than a minute, try restarting both devices.

Can I use Soundcore headphones with multiple devices at the same time?

You can pair them with multiple devices, but they'll only play audio from one at a time. If you're playing music on your phone and then start playing something on your laptop, the headphones will switch to whichever device you started playing on. You can't listen to both simultaneously.

Why do my Soundcore headphones keep disconnecting?

The most common causes are low battery, being too far from your device (beyond 30 feet), or interference from other wireless devices. Try charging the headphones fully, moving closer to your device, and moving away from microwaves or routers. If the problem persists, try forgetting the headphones from your device's Bluetooth settings and pairing them again.

Do I need to unpair my Soundcore headphones before connecting to a different device?

No, you can just turn off Bluetooth on the old device and turn it on on the new device. The headphones will connect to whichever device is actively looking for them. However, if both devices have Bluetooth on, the headphones may stay connected to the one they were most recently paired with, so turning off Bluetooth on the old device first can help.

What should I do if my Soundcore headphones won't show up in my Bluetooth list?

First, make sure the headphones are charged and Bluetooth is turned on on your device. Then hold the power button on the headphones for at least 10 seconds — some models need longer — until you see the light flash. If they still don't appear after 30 seconds, restart both the headphones and your device and try again.