The basic pairing process
To connect Sony headphones to your iPhone, you turn on Bluetooth on your phone, put the headphones into pairing mode, and select them from the list that appears. The headphones stay connected after that first time — you won't have to pair them again unless you reset them or pair them with a different device.
The exact steps depend on which Sony headphones you own, because different models enter pairing mode in different ways. Some have a dedicated button. Others require you to hold the power button for several seconds. A few use a combination of buttons. Your headphones came with a manual that shows which one yours uses — if you don't have it, you can find the model number on the headphones themselves and search for the manual online.
The iPhone side is always the same: open Settings, tap Bluetooth, turn it on, and wait for your headphones to appear in the list below. Once they do, tap the name and they connect.
Key Takeaways
- Sony headphones enter pairing mode differently depending on the model — check your manual or the model number to find the right button combination for yours.
- Your iPhone's Bluetooth setting is in Settings > Bluetooth, and you turn it on before putting the headphones into pairing mode.
- Once paired, your headphones connect automatically when you turn them on and Bluetooth is on, without needing to pair again.
- If your headphones don't appear in the Bluetooth list, they may not be in pairing mode, or they may already be paired with another device.
- Forgetting the headphones from your iPhone and repairing them fixes most connection problems.
Finding your Sony headphones' pairing mode
Before you open your iPhone's Bluetooth settings, you need to put your headphones into pairing mode. This is the mode where the headphones broadcast their signal so your phone can find them. Without pairing mode, your iPhone won't see them in the Bluetooth list.
The most common method across Sony models is to hold the power button for 5 to 7 seconds until you see a light flash (usually blue or white) or hear a voice prompt saying "pairing mode" or "waiting to connect." Some models flash the light repeatedly while in pairing mode. Others flash once and then stay solid.
If holding the power button doesn't work, look for a separate button labeled "Pairing," "Connect," or with a Bluetooth symbol. Press and hold that button instead. A few Sony models require you to hold the power button and a volume button at the same time. The manual that came with your headphones will show the exact method — if you've lost it, search online for your model number plus "pairing mode" and you'll find the instructions.
Once the headphones are in pairing mode, you have a limited window — usually 3 to 5 minutes — to complete the pairing on your iPhone. If that window closes before you finish, the headphones exit pairing mode and you'll have to start over.
Pairing through your iPhone's Bluetooth settings
Open the Settings app on your iPhone. Scroll down and tap Bluetooth. You'll see a toggle at the top — make sure it's turned on (it will be green or blue). Below that, you'll see a section labeled "Available Devices" or "Other Devices."
Your Sony headphones should appear in that list within a few seconds of entering pairing mode. The name will usually be something like "Sony WH-1000XM4" or "Sony WF-C700N" — whatever your specific model is. Tap that name once.
Your iPhone will connect to the headphones. You may see a brief "Connecting" message, and then the headphones' name will move to a section at the top labeled "My Devices" or "Connected." Once they're there, the pairing is complete. You can close Settings.
Test the connection by playing audio on your iPhone — music, a video, or a voice memo. The sound should come through the headphones, not the phone's speaker. If you don't hear anything, check that the headphones' volume isn't turned all the way down, and that the headphones themselves are turned on.
What to do if the headphones don't appear in the list
If you've turned on Bluetooth and waited 30 seconds but your headphones still don't show up, they're probably not in pairing mode. Go back to your headphones and try the pairing mode button combination again. Make sure you're holding it long enough — many people release too early and the headphones don't actually enter pairing mode.
If the headphones are in pairing mode but still don't appear, they may already be paired with another device. Sony headphones can only pair with one device at a time, though they can remember multiple devices. If your headphones were recently connected to a computer, tablet, or another phone, they may still be trying to connect to that device instead of your iPhone. Turn off Bluetooth on that other device, or reset the headphones to factory settings and try pairing again.
To reset most Sony headphones, hold the power button for 10 to 15 seconds (longer than the pairing mode hold) until you see a specific light pattern or hear a reset confirmation. Check your manual for the exact reset procedure for your model, because it varies. After a reset, the headphones will enter pairing mode automatically, and you can pair them with your iPhone.
Reconnecting after the first time
Once you've paired your Sony headphones with your iPhone, they'll connect automatically every time you turn on the headphones and Bluetooth is on. You don't have to go through the pairing process again. Just turn on the headphones, make sure Bluetooth is on in your iPhone's settings, and wait a few seconds. The connection happens in the background.
If the headphones don't connect automatically, try turning them off and back on. If that doesn't work, go to Settings > Bluetooth, find your headphones in the "My Devices" section, and tap them once to reconnect manually.
If your headphones keep disconnecting or won't reconnect at all, the pairing may have become corrupted. The fastest fix is to forget the headphones from your iPhone and pair them again from scratch. In Settings > Bluetooth, find your headphones in the "My Devices" section, tap the information icon (a small "i" in a circle) next to the name, and tap "Forget This Device." Then put the headphones back into pairing mode and pair them again using the steps above.
Pairing with multiple devices
Sony headphones can remember several devices at once, even though they can only be connected to one at a time. If you want to use the same headphones with your iPhone and a laptop, you can pair them with both. The headphones will stay connected to whichever device you used most recently, and you can switch by turning off Bluetooth on one device and turning it on on another.
To pair with a second device, put the headphones into pairing mode again (the same way you did for your iPhone) and pair them with the new device through that device's Bluetooth settings. The headphones will remember both devices. When you want to switch, just disconnect from one and connect to the other — you won't have to pair again.
If you pair with too many devices, some Sony models will forget the oldest one. Check your headphones' manual if you need to know the limit for your specific model.
Troubleshooting sound and control problems
If your headphones are connected but you don't hear any sound, first check that the headphones' volume isn't turned all the way down. Use the volume buttons on the headphones themselves, not your iPhone's volume buttons — they control different things. If the headphones are at full volume and you still hear nothing, check that your iPhone's volume is turned up and that you're not in silent mode (the mute switch is on the left side of the phone).
If the headphones are connected but your iPhone is still playing sound through the speaker, go to Settings > Bluetooth, find your headphones in the "My Devices" section, and tap them once. This forces the audio output to switch to the headphones.
If the headphones connect but the buttons don't control your iPhone (pause, skip, volume), the pairing may not have completed fully. Forget the headphones and pair again. If that doesn't fix it, check whether your specific Sony model supports remote controls on your iPhone — some older models don't, and you'll have to use the iPhone itself to control playback.
Frequently Asked Questions
Why won't my Sony headphones show up in the Bluetooth list?
The headphones are probably not in pairing mode. Hold the pairing button or power button longer than you think you need to — most people release too early. If they're in pairing mode but still don't appear, they may already be paired with another device. Turn off Bluetooth on that device or reset the headphones to factory settings.
Do I have to pair my Sony headphones every time I use them?
No. Once you pair them the first time, they'll connect automatically whenever you turn them on and Bluetooth is on. You only pair once. If they stop connecting automatically, try turning them off and back on, or forget them and pair again.
Can I use the same Sony headphones with my iPhone and my computer?
Yes. Pair them with both devices using the same pairing mode process. The headphones will remember both and connect to whichever device you use most recently. To switch, turn off Bluetooth on one device and turn it on on the other.
My headphones are connected but I don't hear any sound. What's wrong?
Check that the headphones' volume is turned up using the buttons on the headphones themselves. Then check that your iPhone's volume is up and you're not in silent mode. If both are turned up, go to Settings > Bluetooth, find your headphones, and tap them to force the audio output to switch to them.
The buttons on my headphones won't pause or skip songs on my iPhone.
Forget the headphones from your iPhone and pair them again. If that doesn't work, your specific Sony model may not support remote controls on iPhone — check your manual to confirm whether your model has that feature.